Allweviee QW5 2K QHD 355 PTZ Solar Security Cameras Wireless Outdoor WiFi User Manual

Allweviee QW5 2K QHD 355 PTZ Solar Security Cameras Wireless Outdoor WiFi

Product Information

Specifications:

• Power Adapter: 5V 1.5A
• Included in the Box: Camera, Bracket, USB Cable, User Manual, Mounting Kit
• Features: Front Spotlight, MIC, PIR, Antennas, Indicator Light,
  Micro SD Card Slot, Reset Button, Speaker

Product Usage Instructions

Preparation:
Camera: Press and hold the power button until you hear the prompt, and the indicator light flashes blue slowly.

Smartphone:

1. Enable the location service on your smartphone.
2. Connect your smartphone to your home Wi-Fi.

Reset: Press and hold the reset button for about 3 seconds.

Downloading the APP:
Scan the QR code to download the APP or search for O-KAM in the app store (Google Play/APP Store).

APP Account Registration:

1. Click Register now at the login interface.
2. Select the address, enter your phone number, and get the verification code.
3. After entering the verification code, set the password and click Finish.

FAQ

1. Q: What should I do if the indicator light does not turn on?
   A: Ensure you are using a power adapter with a rating of 5V 1.5A or below. If the issue persists, contact customer service for assistance.

2. Q: How do I update the firmware?
   A: Enter system settings, tap on Device Health, then tap on Firmware to update. It’s recommended to keep the firmware up to date for optimal performance.

Customer Service
Claim
1-year

warranty for your device

• Please email us: aftersale@rraycom.com
• Phone: +1 2027384449 (Sun. – Thur. 8pm – 12pm)
• Facebook: Rraycomz@gmail.com

Packing List

1. Camera *1
2. Bracket *1
3. USB Cable *1
4. User manual *1
5. Mounting Kit *1

Front

QW5

Rear

Caution： U se a power adapter with a power rating of 5V 1.5A or below.

Indicator light definition

Reset| Green light flashes
Charging| Red light
Fully Charged| Off
No network| Blue light flashes
Wifi connected| Blue (when it wakes up)
Sleep| Off

Preparation

Camera
Press and hold the power button until you hear the prompt, and the indicator light flashes blue slowly.

Smartphone

1. Enable the location service on your smartphone.
2. Connect your smartphone to your home Wi-Fi.

Reset
Press and hold the reset button for about 3 seconds.

Download the APP
Scan the QR code to download the APP. Or search for “O-KAM” to download through the app store (Google play/ APP Store).

O-KAM

APP account registration

1. Click “Register now” at the login interface
   • Select the address
   • Enter your phone number
   • Get the verification code.
2. After entering the verification code you need to set the password and click Finish.

Add cameras

Log in and click “Add” button found at the “Home” interface or click the “+ ” in the upper right corner.

At the QR code scanning interface, scan the QR code on the camera.

The camera is ready for WiFi configuration when you hear the prompt. And click “Next”.

Please enter the passwords and double check if it’s correct. Then tap “Next”.

• Make sure the Wi-Fi is 2.4Ghz. WiFi password case sensitive.

The APP will automatically generate a QR code. Point the camera lens at the QR code and keep it at a distance of 6-8 inches. You’ ll hear a beep and voice prompt when it’s scanned successfully.

When the device is connected to the WiFi, name the camera and click “Bind Now”.

Please take the camera and phone to the location where you’re going to install the camera, and then click “Next” to test the signal strength.
Make sure the Wi-Fi signal strength is strong at the location.

APP function introduction

Firmware update

Enter system settings “ “- Tap on Device Health Tap on “Firmware” to update. Please keep the firmware up to date.

Share the device

Enter the system settings “
Sharing method: Share the QR code to a user. The other user adds the camera by scanning the QR code;The QR code is valid for 30 minutes, and one QR code can only be shared
with one user. Generate more QR codes for more members. Maximum of 4 people can live view.

Rotation control

Cruise and Guard position

• Quick 90° vertical cruise
• Quick 180° horizontal cruise
• Rotate to the guard position
• PTZ position reset

AI Function

Humanoid tracking

Humanoid framing

Tutorial Videos
Please scan the QR code below

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>