Theefun TFM01 Fog Machine User Manual

Theefun TFM01 Fog Machine

Description

This 400WT heedful Fog Machine is used to produce dense, unscented and long lasting fog, ideal for live concerts, stages, theaters, parties, weddings, KTV, pubs, balls and family entertainment gatherings. Just hide the machine in a place where it can’t be seen and then click the remote to send out a blast of fog.

Caution

• Use indoors only.
• Non-waterproof. If there are water drops or fog fluid on its surface, please switch off the device at once and wipe it out.
• Put it in horizontal direction. Don’t incline it or place it upside down.
• Do not put it on the wood materials, carpets or other inflammables.
• Often check whether there has enough fog fluid in the tank before use to avoid damages.
• There may be burnt odor for the first use. That’s normal About 10 minutes later, this odor will die away.
• Keep over 1 m away from this fog machine because of high temperature(surface temperature: 40-80 ‘C )of fog nozzle.
• Put the machine at a drafty place to keep the best cooling effect.
• Do not spray fog to people directly and far away from fire or other heat resources.
• Use professional fog fluid. Do not add any flammable liquid such as oil natural gas, explosives, perfume etc. in its tank.

Specifications

• Input: AC 110-120V 60Hz
• Power: 400W
• Tank Capacity: 400ml ( 0.106gal )
• Output: 1500 cfm
• Fluid Consumption: 7.5 ml/min
• Warm up Time: 3-5 min
• Output Distance: 2-3 m
• Remote Length: 3m/9. 8ft
• Dimension: 23 x 11 x 11 .5 cm/9.06 x 4.33 x4.53 in(L WH)
• Weight: 1. 8kg
• Frequency band: 433MHz
• Maximum transmission power: 8 dBm

Package Contents

• 1 x Fog Machine
• 1 x Wired Remote Console
• 1 x Wireless Remote Console
• 1 x Handle
• 2 x Screw
• 2 x Gasket
• 1 x User Manual

Operational Instruction

1. Add a certain volume of professional fog fluid into its tank and screw tightly the cover of liquid can.

2. Connect the remote console to this fog machine and then plug power cable to an appropriate power socket(red indicator lights on).

3. Press down the rocker switch on fog machine to let it warm up.
   3-5minutes , a”Dl” sound indicates completing warm up process(green indicator lights on).

4. Press down and hold red button on remote console for about 60s until it sprays fog.

5. It will spray fog continuously for 60s, then stop spraying for preheating again.

6. 2-3 minutes later, another “DI” sound indicates completing warm up process.

7. Press down and hold red button on remote console to continue spraying fog.

8. Press the rocker switch again to power off fog machine and unplug power cable from power socket.

Maintenance

• Please use mixed liquid of 80% distilled water and 20% vinegar to clean the dirty in refractory pipe before and after each use.

• Reequip the spray nozzle after cooling and add fog fluid for next use.

• Use dry cloth to clean machine and keep it dry for storage.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge
  if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>