CHAMPION 100592V 6250W Dual Fuel Generator User Guide
- June 7, 2024
- Champion
Table of Contents
CHAMPION 100592V 6250W Dual Fuel Generator User Guide
www.championpowerequipment.com
Set Up
1. Open shipping carton. Assembly > Unboxing
2. Attach wheel kit. Assembly > Install Wheel Kit
3. Add oil. Assembly > Add Engine Oil.
Recommended: 10W-30, up to 37.2 fl. oz. (1.2 qt. / 1.1 L) DO NOT overfill.
4. Move the generator outdoors.
Move generator to an open, outdoor area. Point exhaust away. Never run
generator in enclosed areas (e.g., not in house or garage).
Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials.
Start Up
5. Add fuel. Assembly > Add Fuel: Gasoline
DO NOT use E15 or E85.
Connect propane cylinder. Assembly > Add Fuel: Propane (LPG)
6. DO NOT plug in any electrical devices.
7. Select Fuel. Operation > Starting the Engine.
Gasoline: Turn fuel select dial to “Gasoline Run” position. Propane: Turn fuel
select dial to “Propane Run” position.
Start Up
8a. Gasoline
Manual Start
- Move the choke lever to the “CHOKE” position.
- Pull the starter cord.
- Move the choke lever to the “RUN” position.
8b. Propane
Manual Start
- Move the choke lever to the “CHOKE” position.
- Pull the starter cord 3-5 times until you feel some combustion pulses.
- Move the choke lever to the “RUN” position.
- Pull the starter cord.
9. Plug in. Operation > Connecting Electrical Loads.
NEED ASSISTANCE OR HAVE A QUESTION? GIVE US A CALL.
