FIRST AUSTRIA FA-5409 Jug Kettle Instruction Manual

FIRST AUSTRIA FA-5409 Jug Kettle

PRODUCT DESCRIPTION

1. Hinged Lid
2. ON/OFF Switch
3. Pilot Light
4. MAX Water Level Indicator
5. Kettle body
6. Energy base

IMPORTANT SAFEGUARDS

When using your kettle, basic safety precautions should always be followed, including the following:

1. Read all instructions carefully, even if you are familiar with the appliance.
2. Close supervision is necessary when any appliance is used by or near children.
3. Before connecting the kettle, check if the voltage indicated on the appliance corresponds with the main voltage in your home. If this is not the case, contact your dealer and do not use the kettle.
4. Switch off and unplug from the outlet before filling, emptying or cleaning, or when not in use.
5. Do not overfill as boiling water may be ejected. The maximum level is marked on the kettle.
6. Do not operate or place any part of this appliance on or near any hot surface (such as gas or electric burner or in a heated oven).
7. Do not let the cord hang over the edge of a table or counter. Do not let the cord touch hot surfaces.
8. Never yank on the cord as this may damage the cord and eventually cause a risk of electric shock.
9. If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the manufacturer, because special-purpose tools are required.
10. Avoid touching hot kettle surfaces – use the handle and the knobs.
11. To avoid possible steam damage, turn the spout away from walls or cabinets when operating the kettle.
12. If operated on wood furniture, use a protective pad to prevent damage to delicate finishes.
13. To avoid scalding, always ensure the lid is correctly positioned before operating.
14. Scalding may occur if the lid is removed whilst heating.
15. Extreme caution must be used when moving the kettle containing hot water. Never lift the kettle by it’s lid. Always use the body handle.
16. Do not switch your kettle on if it is empty.
17. To protect from electrical hazards, do not immerse this kettle or cordset in any liquid.
18. Use the kettle only with the supplied base unit. Do not use the base unit for other purposes.
19. To protect against fire, do not operate in the presence of explosive and/or flammable fumes.
20. A kettle should not be left connected to a wall socket when the room temperature is likely to fall to outdoor winter temperatures. At sub-zero temperatures, the automatic control thermostat may reset to boil and energize the element.
21. Do not use the kettle for any purpose other than heating water. Other liquids or food will contaminate the interior.
22. This product has not been designed for any other uses than those specified in this manual.
23. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
24. Children should be supervised to ensure that they do not play with the appliance.

WARNING:
Compare the local voltage with the voltage declared on the device.

INSTRUCTIONS FOR USE

1. Before first use, fill the kettle with clean water to maximum capacity and boil. Discard the water and repeat.
2. The kettle should always be unplugged when filling or adding water.
3. Fill the kettle with water to the desired level. Do not overfill or there will be a risk of spillage or spitting. Do not forget to close the lid after filling, otherwise, the kettle will not automatically switch off after use.
4. Do not fill with less than 0.5 litre of water (up to „MIN“ indication) to prevent the kettle from running dry while operating.
5. Do not fill with more than 1.7 litres of water (up to the „MAX“ indication).
6. An automatic safety cut-out has been fitted for protection against overheating. It will operate if the kettle is switched on when containing insufficient water. Always ensure that the water inside the kettle covers the minimum mark. If the automatic safety cut-out has operated, disconnect from the power outlet and allow the kettle to cool down for 5 to 10 minutes. Then refill with water and switch on – the kettle will then boil and cut off as in normal operation.
7. Place the power base on a dry flat surface.
8. Place the kettle on the power base. The electrical connections will be made automatically as the kettle slides onto the power base.
9. Plug the cordset into an earthed power socket.
10. The appliance is switched on by pressing the ON/OFF switch. The pilot light will come on
11. When the water has boiled, the kettle will switch off automatically.
12. Do not remove the kettle from the power base without switching off first.
13. To pour water, lift the kettle from the power base and pour.

HOW TO CARE FOR YOUR KETTLE

Wipe the exterior of the kettle with a soft, damp cloth or sponge. Remove stubborn spots with a cloth moistened with mild liquid detergent. Do not use abrasive scouring pads or powders. Never immerse the kettle in water or other liquids.
From time to time depending on the nature of your water supply, a limescale deposit is naturally formed and can be found mostly adhered to the heating element and reduces the heating capacity. The amount of limescale deposited (and subsequently the need to clean or descale) largely depends on the water hardness in your area and the frequency with which the kettle is used.

Limescale is not harmful to your health. But if poured into your beverage, it can give a powdery taste to your drink. Therefore, the kettle should be descaled periodically as indicated below:

DESCALING

Descale the kettle regularly. With normal use, at least twice a year.

1. Fill the kettle up to „MAX“ with a mixture of one part ordinary vinegar and two parts water. Switch on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Throw the mixture away the next morning.
4. Fill the kettle with clean water up to „MAX“ and boil again.
5. Throw away this boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.

STORAGE

It is recommended to store in a covered and dry place at an ambient temperature not higher than + 40 ° C with relative humidity above 70% and an absence in an environment of dust, acid, and other vapors.

TRANSPORTATION

To the device, special transportation rules are not applied. When transporting the unit, use the original packaging. During transportation, avoid drops, impacts, and other mechanical influences on the device, as well as direct exposure to atmospheric precipitation and aggressive environments.

SPECIFICATIONS

Power supply: 220-240V ~ 50/60Hz
Power consumption: 1850-2200W
Maximum water capacity: 1.7 l
Unit operating life is 3 years

Environment-friendly disposal
You can help protect the environment! Please remember to respect the local regulations: hand in the non-working electrical equipment to an appropriate waste disposal center.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>