Ledvion LVO10056 LED Prikspot Aluminium Instruction Manual

: June 17, 2024
: Ledvion

Table of Contents

Ledvion LVO10056 LED Prikspot Aluminium
Product Information
Product Usage Instructions
BOX CONTENT
Installation instructions
Care
General Safety

Ledvion LVO10056 LED Prikspot Aluminium

Product Information

Specifications:

Model: LVO10056
Language Options: GB, DE, NL, FR, ES
Version: 2.0
Release Date: 30-05-2023

Product Usage Instructions

Setting Up the Product
Follow these steps to set up your product:

Step 1: Unbox the product and check for all components.
Step 2: Connect the power cable to the device.
Step 3: Power on the product by pressing the power button.

Operating the Product
To operate the product:

Step 1: Use the control panel to select your desired settings.
Step 2: Follow the user manual instructions for specific functions.
Step 3: Monitor the product while in use for any alerts or notifications.

Maintenance and Care
Proper maintenance ensures product longevity:

Step 1: Regularly clean the product using a damp cloth.
Step 2: Avoid exposing the product to extreme temperatures or moisture.
Step 3: Refer to the user manual for detailed maintenance guidelines.

BOX CONTENT

Installation instructions

Installation only by persons with electro-technical knowledge and experience.
Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
1. Ensure the main power source is turned off.
2. Connect the device to the main supply with the terminal block.
3. Make sure that the cables are connected securely to the terminals on the device.
4. When the installation is finished, activate the power source and test the function.

$Ledvion-LVO10056 -LED-Prikspot-Aluminium-FIG- $1$$ Notes on Disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.

Care

Before cleaning the unit, disconnect it, if necessary from other components; do not use aggressive cleaning agents. The unit has been carefully checked for defects. If nevertheless, you do have cause for complaint, please go back to the retailer where you have bought the product together with your proof of purchase. We are not liable for damage arising from incorrect handling, improper use or wear or tear. We reserve the right to make technical modifications.

General Safety

Read the manual carefully before use. Keep this manual for future reference.
Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
This product shall not be used by children without the supervision of an adult. Children shall not play with the device.
Do not modify the product in any way.
Do not expose the product to water or moisture. (IP 20)
Do not immerse the product into water. (IP 44 – IP 67)
Keep the product away from heat sources.
Do not block the ventilation openings. Do not look directly into the LED lamp.
Keep a minimum distance of 1 meter between the lamp and the surface being illuminated.

Electrical safety

To reduce risk of electric shock, this product should only be opened by an authorized technician when service is required.
Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Make sure that the cable does not hang over the edge of a worktop and cannot be caught accidentally or tripped over

Warning

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Caution, risk of electric shock.
The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.

Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks or their respective holders and are hereby recognized as such. Please visit us online on our website: www.ledvion.com For more information about our company and our products,

Documentation
The product has been manufactured and supplied in compliance with all relevant regulations and directives, valid for all member states of the European Union. The product complies with all applicable specifications and regulations in the country of sales.
Formal documentation is available upon request. The formal documentation includes, but is not limited to the Declaration of Conformity, the Material Safety Data Sheet and the product test report.

CE declaration
This product complies with the following directives:

LVD: 2014/35/EU
EMC: 2014/30/EU
RoHS: 2011/65/EU

Additionally, for Products with Radio transmitter units:

RED: 2014/53/EU

The complete Declaration of Conformity Document (DOC) can be found on our website.

Ledvion Ekkersrijt 4304 5692 DH Son en Breugel The Netherlands www.ledvion.com

FAQ

Q: How do I change the language settings on the product?
A: To change the language, navigate to the settings menu and select your preferred language from the options provided.
Q: What should I do if the product does not power on?
A: Check the power connection and ensure it is properly plugged in. If the issue persists, contact customer support for assistance.
Q: Can I use the product with international power outlets?
A: The product is designed to work with a specific voltage range. Using international power outlets may require an adapter to match the voltage specifications.