AMX MSA-RMK-07 Rack Mount Kit User Manual
- June 17, 2024
- AMX
Table of Contents
AMX MSA-RMK-07 Rack Mount Kit User Manual
Overview
The MSA-RMK-07 Modero S Series® Rack Mount Kit (FG2265-15) is an optional accessory for the MSD-701 7” Modero S Series Wall/Flush Mount Touch Panel (FIG. 1). The kit allows the touch panel to be mounted directly on an equipment rack and includes a rack mount frame, screws and washers.
Product Specifications
MSA-RMK-07 (FG2265-15) SPECIF ICATIONS
Dimensions (HWD):| 5.22” x 19.00” x 2.10” (13.26 cm x 48.26 cm x 5.33 cm)
Weight:| 2.2 lbs (1 kg)
Included Accessories:| • Screws (2), #8-32 X .375 LG, PPH ( 80-0150-01 )
• Screws (4), #10-32 X .625, PH.TRUSS, BLK ( 80-0186 )
• Washers (4), #10, BLACK NYLON ( 80-0342 )
Installation of the MSA-RMK-07
The MSA-RMK-07 offers a stable installation mount for the MSD-701 through the
panel’s Back Box.
NOTE: All doors, covers, and other obstacles preventing the installation
of the Rack Mount. The kit should be removed before installation is attempted.
Due to the size of the Modero S Series panel, it may not be possible to close
racks that contain a rack door once installation is complete.
To install the MSA-RMK-07
-
Secure the Rack Mount Panel to the rack with #10-23 screws and washers. Make sure that the installation flanges face away from the front of the rack (FIG. 2).
-
Insert the Back Box into the Rack Mount Panel, making sure that the Back Box is in the correct orientation. The stand-ups on the installation flanges will pass through the Back Box and help anchor it in place.
-
Use the #8-32 screws to attach the Back Box to the stand-ups. Note that the Rack Mount Panel has only two stand-ups, located opposite each other on the Installation flanges.
WARNING: The maximum recommended torque to be used on the Back Box installation screws is 5 IN-LB [56 N-CM]. Applying excessive torque while tightening the screws, such as with powered screwdrivers, can strip out the screw holes or damage the plastic back box.
-
With the Back Box anchored in the Rack Mount Panel (FIG. 3), you may now install the MSD-701 into the Back Box.
NOTE: For more information on installing the MSD-701 into its back box, please refer to the MXD/T-700 Operation Reference Guide, available from www.amx.com.
A Note About Wall and Rack Installation
Some products are installed in areas of differing temperature and cooling
methodologies. These include products installed in walls, racks, cabinets,
etc. Those areas may have different temperatures and/or cooling approaches
that must be taken into consideration to maintain the product within the
specified operating temperature. FIG. 4 shows an AMX device installed in a
wall with a filled volume (such as with insulation or concrete), as well as
with a closed volume (such as between studs in an otherwise finished wall).
The diagram shows how heat generated by the device or other devices may have
no way to escape, and may build up to levels that may affect device operation.
In FIG. 5, the diagram displays an AMX device in a typical rack mounting, with full air circulation around the front and back of the device. In this case, the main concern is with heat building up between components, possibly to levels that may affect device operation.
Installation Recommendation
During any installation, a lack of ventilation may produce conditions that may adversely affect the device’s operation. In these circumstances, special care must be taken to make sure that temperatures within enclosed areas do not exceed the device’s maximum rated temperature.
2015 Harman. All rights reserved. Modero, Modero S Series, AMX, AV FOR AN IT WORLD, and HARMAN, and their respective logos are registered trademarks of HARMAN. Oracle, Java and any other company or brand name referenced may be trademarks/registered trademarks of their respective companies. AMX does not assume responsibility for errors or omissions.
AMX also reserves the right to alter specifications without prior notice at any time. The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN – Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom +44 1904-343-100 www.amx.com/eu/
Download PDF:AMX MSA-RMK-07 Rack Mount Kit User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>