AMX VARIA-150 15.6 Inch Touch Panel User Guide
- May 15, 2024
- AMX
Table of Contents
QUICK START GUIDE
VARIA-150 15.6” Touch Panel
VARIA-150N 15.6” Touch Panel (No-Comm)
Overview
AMX VARIA-150 (AMX-UTP1511) & VARIA-150N (AMX-UTP1511N) are 15.6”
professional-grade touch panels designed to adapt to the unique needs of your
environment by offering a sel ection of personas. Varia personas are pre-
loaded apps that define the entire panel experience.
FIG. 1 AMX VARIA-150 Touch Panel
Product Specifications
VARIA-150 SPECIFICATIONS
| Dimensions (HWD) | TBD |
|---|---|
| Weight | TBD |
| Power Consumption | PoE, 802.3at, 30 watt |
| External Power Supply Required | Optimal performance requires use of the |
following
AMX PoE power supply (not included):
• PS-POE-AT-TC, PoE Injector, 802.3at Compliant (FG423-84)
Certifications & Compliance| • UL
• CE
• CB
• FCC Class B (-5dB)
Environmental| Operating Temperature
• 0°C – 40° C (32°F – 104°F)
• 5% – 85% Humidity
Storage Temperature
• -20°C – 60° C (4°F – 140°F)
• 5% – 90% Humidity
Included Accessories| • Mounting Plate
• Adhesive Pad
• Set Screw
• Installation Template
VARIA-150 Installation
Varia can be surface-mounted onto a wall, glass or other smooth surface, or
connect to any number of popular VESA mounts with the included mounting
bracket & hardware.
The VARIA-150 converts to a tabletop touch panel when used in conjunction with
a tabletop stand accessory (sold separately).
TABLETOP STAND ACCESSORIES
VARIA-ACS-150A
(AMX-UMT-1511)| AMX Varia Angle-Select Tabletop Stand
for VARIA-150 & VARIA-150N
---|---
Power Over Ethernet
Power is supplied via Power Over Ethernet (PoE), utilizing an AMX certified
PoE injector such as the PS-POE-AF-TC PoE Injector (FG423-83) or compatible
network switch which is classified as ES1 and PS2 output in accordance with
IEC/EN/UL 62368-1. Connect the incoming Ethernet cabl e to the RJ-45 port on
the VARIA-150.
Mounting Plate
The included mounting plate contains a 100×100 VESA hole pattern, set screw,
and dedicated area for the included adhesive pad.
FIG. 2 Mounting Plate
STEP 1: Installation Prerequisites
Prior to touch panel installation, identify a proper installation surface in
accordance with local laws and building codes. Ensure that your category cable
(networking cable) has access to the location.
STEP 2: Install the Mounting Plate
If installing on wall, mark your surface using the included installation
template for the four (4) VESA holes and one (1) desired cable pass-thru
location. Drill holes as required and screw the mounting bracket onto the
surface, using appropriate hardware for the surface (ie. drywall, concrete,
brick, etc.).
If installing on glass or other smooth surface using the adhesive pad, first
apply the adhesive pad to the mounting bracket, only exposing one si de of the
pad.
Then adhere the mounting bracket to the surface with the set screw hole facing
UP and the two tabs on the BOTTOM. Make sure it is a secure fit, but do not
apply too much pressure as glass may break.
STEP 3: Route Category Cable
Remove the touch panel’s l ower rear cover by removing two (2) screws and then
sliding the cover off. Press the rectangular holes to push the cover away from
you.
FIG. 3 Lower Cover Holes
Plug in the networking cable and route it out one (1) of the three (3)
available openings in the lower cover: left, right, or bottom. Once fully
seated, reattach the lower rear cover.
STEP 4: Mount the Panel to Plate
Using the top tab & slot, insert the panel to the mounti ng bracket. Make sure
the tabs are fully engaged.
STEP 5: Set Screw
Insert & tighten the set screw to secure the panel to the mounting bracket.
Caution: This product is only suitable for installations less than or
equal to 2m (6.56ft) high for CE/UL safety.
Removing
To remove the panel, follow the installation directions in reverse.
Powering On & Panel Setup Wizard
Powering on for the first time (or after a factory reset) will launch a setup wizard where device settings and the panel’s persona are selected. After being selected, the panel will boot to that persona on each subsequent power cycle or reboot.
- Select your language
- Select your ti me zone, date, & time
- Set up your network
- Select your panel’s persona:
- AMX G5 Control: AMX NetLinx control panel, utilizing a TP5 file created using TPDesign5 software.
- AMX Book: Intuitive room scheduling, connecting to Microsoft Exchange, O365, or Google Calendar.
- Zoom Rooms Controller: Zoom’s native ZRC app UI to control a Zoom Rooms space
- Web Kiosk: a full-screen borderless HTML5 interface to display webcontent via URL.
FIG. 4 Select App page in the Setup Wizard
The persona can be changed at any ti me in the Advanced Setti ngs menu.
Each selecti on requires its own setup. After confirming your app selecti on,
the panel will continue to step through setup for the selected persona. Full
stepby-step walkthroughs can be found in the AMX Varia Programming &
Configuration Guide available on
AMX.com.
AMX Varia Programming & Configuration Guide:
https://www.amx.com/enUS/site_elements/configuration-
programmingmanual-varia-touch-panels
Function Button
The touch panel has a flush button on the top of the bezel, on the right side.
FIG. 5 Panel Button Locations
The Functi on Button serves multiple purposes:
- A quick press & release will turn the panel’s display on & off (i e. sleep & wake).
- A press & hol d for 4 seconds will return to the primary persona. This is useful if another app had been loaded on top of the panel’s primary persona app.
- If the panel is shut down, pressing the Functi on button will boot up the panel.
- If the Functi on button is pressed & held during the boot process, the panel will launch into Safe Mode.
Settings Button
The touch panel has a pin-hole button which serves two purposes:
- A quick press & release will open Panel Settings
- A press & hold for 4 seconds will reboot the panel
The default protected password to access Panel Settings is 1988.
NOTE: Do not confuse the Settings button (pin-hol e button) with any of
the microphone or sensor holes. The Settings button is the larger hole located
closest to the Function Button. Irreparable damage may occur if a foreign
object is pushed down the microphone hole or into one of the sensors.
Light Sensor & Proximity Sensor
FIG. 6 Panel Camera & Sensor Locations
The ambient light sensor can automatically adjust panel brightness based on
the environment. See Display Settings to enable automatic brightness.
The laser proximity sensor will detect nearby motion to wake the panel up
without requiring a touch. NFC
When using NFC, use the included decal to indicate the location of the sensor.
Note: No-Comm panels do not have NFC.
FIG. 7 NFC Sensor Location & Decal
Placement
©2023 HARMAN. All rights reserved. SmartScale, NetLi nx, Enova, AMX, AV FOR AN
IT WORLD, and HARMAN, and their respec ti ve l ogos are registered trademarks
of HARMAN.
Oracle, Java and any other company or brand name referenced may be
trademarks/registered trademarks of their respective companies.
AMX does not assume responsibility for errors or omissions. AMX also reserves
the right to alter specifications without prior noti ce at any time. The
AMX Warranty and Return Pol icy and related documents can be viewed/downloaded
at www.amx.com .
3000 RESEARCH DR IVE, RICHARDSON, TX 75082 AMX.com |
800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153