AMX PS3.0 Power Supplies Adapter User Manual
- June 17, 2024
- AMX
Table of Contents
AMX PS3.0 Power Supplies Adapter User Manual
Power Supply Models
AMX offers 6 variations of our Class I, CSA/CE approved, and UL-listed system power supplies:
PS/N/R POWER SUPPLIES
PSN6.5| (FG423-41)| With a US power cord
PS4.4| (FG423-44)| Includes US power cord and barrel plug
PS3.0| (FG423-30)| Includes US power cord and barrel plug
PSR2.5| (FG423-47)| Includes 3-pin retained captive-wire connector
and US power cord
PSR5.4| (FG423-48)| Includes 2-pin retained captive-wire connector
and US power cord
PSR7- V| (FG423- 49)| IEC power cord is provided as a
separate part, dependent on country requirements.
Note: All models use an input connector sanctioned by the IEC (International
Electrotechnical Commission).
PSN6.5 Specifications
FIG. 1 displays the rear panel of the PSN6.5.
PSN6.5 SPECIFICATIONS
Dimensions (HWD):| 1 1/2″ x 5 9/16″ x 9 1/4″ (3.81 cm x 14.10 cm x 23.50 cm)
Weight:| 2.76 lbs. (1.25 kg) (without power cord)
Input:| ~100-240 V, 2.6A MAX (1.3A MAX @ 230), 50/60 Hz
Output Voltage:| 13.5 V
Output Current:| 6.5 A (continuous power output is 90 W max)
Ripple and Noise:| 350 mV peak-to-peak @ 70% load
Protection:| Over-voltage, over-current, short-circuit, transient and thermal
switching regulated, overload protected
Power Indicator:| Green LED indicates the presence of DC on the output.
Connectors:| Three removable 2-pin 3.5 mm mini-Phoenix connectors
Rear Panel Components:| • Three 12 V power supply connectors
• Standard IEC (male) jack for the power cord
Input Power Cord:| 6-foot (1.83 m) IEC cord with a grounded Edison plug for AC
input (US only)
Enclosure:| Metal with a black matte finish
Temp Range:| 32°F – 122°F (0°C – 50°C)
Certification:| • UL: US-listed – Class I Power Supply • PSE approved
• CSA approved CCC approved
• CE approved
Accessories:| • US power cord
• 3 removable 2-pin 3.5 mm mini-Phoenix connectors
• (Optional) AC-RK Accessory Rack Kit ( FG515 )
PS4.4 Specifications
FIG. 2 displays the PS4.4.
PS4.4 SPECIFICATIONS
Dimensions:| 4 5/8″ x 2 1/4″ x 1 1/2″ (11.7 cm x 5.8 cm x 3.5 cm)
Weight:| 1.1 lb. (499 g)
Input:| ~100-240 V, 1.5A MAX (0.6A MAX @ 230), 50/60 Hz
Output Voltage:| 13.5 V
Output Current:| 4.5A MAX
Ripple and Noise:| 150 mV peak-to-peak @ full load
Protection:| Over-voltage, over-current, short-circuit, transient and thermal.
Switching regulated, overload protected.
Power Indicator:| Green LED indicates the presence of V on the output.
Connector:| Barrel plug (2.1mm ID, 5.5mm OD, 9.5mm length)
Input Power Cord:| 6-foot (1.83 m) IEC cord with a grounded Edison plug for AC
input (US only)
Enclosure:| Molded black matte plastic
Temp Range:| 32°F – 104°F (0°C – 40°C)
Certification:| • UL: US-listed – Class I Power Supply CE-approved
• CSA approved PSE approved
Included Accessories:| US power cord
PS3.0 Specifications
FIG. 3 displays the PS3.0. The PS3.0 is a Class I power supply which is
CE approved and UL listed. The PS3.0 uses a barrel-plug connector.
PS3.0 SPECIFICATIONS
Dimensions (HWD):| 3 7/8″ x 1 3/4″ x 1 1/4″ (9.8 cm x 4.5 cm x 3.05 cm)
Weight:| 5.6 oz (150 g) (without power cord)
Input:| ~100-240 V, 3A MAX, 50/60 Hz
Output Voltage:| 12 V
Output Current:| 3.0 A
Ripple and Noise:| 200 mV (60Hz Ripple + Switching ripple and noise)
Protection:| Over-voltage, over-current, short-circuit, transient and thermal
switching regulated, overload protected
Power Indicator:| Green LED indicates the presence of DC on the output.
Connectors:| 1.3mm barrel plug, 11mm long
Input Power Cord:| 6-foot (1.83 m) IEC power cord terminated with a grounded
Edison plug for AC input (US only).
Enclosure:| Molded black matte plastic
Temp Range:| • Operating temperature: 32°F – 122°F (0°C – 50°C)
• Storage temperature: -4°F – 185°F (-20°C – 85°C)
Certification:| • UL: US-listed – Class I Power Supply • FCC-approved
• CUL approved CE approved
• TUV approved PSE approved
Included Accessories:| US power cord
PSR2.5 Specifications
FIG. 4 displays the PSR2.5.
PSR2.5 SPECIFICATIONS
Dimensions (HWD):| 4 3/4″ x 2 3/8″ x 1 1/4″ (12 cm x 6 cm x 3.05 cm)
Weight:| 1.1 lb. (499 g)
Input:| ~100-240 V, 1.5A MAX, 47/63 Hz
Output Voltage:| 24 V
Output Current:| 2.5 A
Ripple and Noise:| 300 mV peak-to-peak @ full load
Protection:| Over-voltage, over-current, short-circuit, over-temperature,
overload protected
Power Indicator:| Green LED indicates the presence of DC on the output.
Connectors:| 3-pin retained captive wire connector (3.5mm)
Input Power Cord:| 4-foot (1.2 m) IEC power cord terminated with a grounded
Edison plug for AC input (US only).
Enclosure:| Molded black matte plastic
Temp Range:| • Operating temperature: 32°F – 104°F (0°C – 40°C)
• Storage temperature: -4°F – 176°F (-20°C – 80°C)
Certifications:| • UL: US-listed – Class I Power Supply • PSE approved
• CUL approved CCC approved
• TUV-GS approved BSMI approved
• FCC approved RCM approved
• CE approved
Included Accessories:| US power cord
PSR5.4 Specifications
FIG. 5 displays the PSR5.4.
PSR5.4 SPECIFICATIONS
Dimensions (HWD):| 4 1/2″ x 2″ x 1 1/4″ (11.5 cm x 5.15 cm x 3.05 cm)
Weight:| 0.48 lb (221 g)
Input:| 100-240 +10% VAC, 47-63 Hz
Input Currency:| • <2A MAX at 100 VAC + full load
• <1A MAX at 230 VAC + full load
Output Voltage:| 12 V
Output Current:| 5.4A MAX
Ripple and Noise:| 200 mV peak-to-peak @ full load
PSR5.4 SPECIFICATIONS (CONT.)
Protection:| Over-voltage, over-current, short-circuit, transient and thermal.
Switching regulated, overload protected
Power Indicator:| Green LED indicates the presence of DC on the output
Connectors:| Mini 2-pin captive wire connector (3.5 mm)
Input Power Cord:| 50 mm IEC power cord terminated with a grounded Edison plug
for AC input
Enclosure:| Molded black matte plastic
Environmental:| • Operating temperature: 32°F to 104°F (0°C to 40°C)
• Storage temperature: -4°F – 176°F (-20°C – 80°C)
Certifications:| • UL: US-listed – Class I Power Supply, • CCC – China CSA approved, CE approved • CU – Russia
• AS/NZS 60950-1 – Australia, New UL Energy Verified Zealand KC – Korea
• BSMI – Taiwan TUV GS – Germany
Included Accessories:| US power cord
PSR7-V Specifications
FIG. 6 displays the PSR7-V. This accessory power supply should be used
only with Listed AMX products.
PSR7-V SPECIFICATIONS
Dimensions (HWD):| 1 5/8” x 5 3/4” x 5 1/8” (4.13 cm x 14.6 cm x 13.02 cm)
Weight:| 1.45 lb. (657 g)
Input:| ~100-240 V, 1.9A MAX, 47/63 Hz
Output Voltage:| 12 V +/-.6V
Output Current:| 5.5 A
Ripple and Noise:| 160mV peak-to-peak @ full load
Protection:| Over-voltage, over-current, short-circuit, over-temperature,
overload protected
Power Indicator:| Green LED indicates the presence of DC on the output
Connectors:| Three removable 2-pin 3.5 mm mini-Phoenix connectors
Input Power Cord:| Dependent on regional model number. Please see the product
catalogue for available country-specific products.
Output Power Connectors:| • Three 12 V power supply connectors
• The connecting cable must be DP-2 or DP-2P and proper AWG.
Enclosure:| Metal with a black matte finish
Environmental:| • Operating temperature: 32°F to 122°F (0°C to 50°C)
• Storage temperature: -4°F – 176°F (-20°C – 80°C)
Note: If mounting the power supply on a rack, you must keep 1 RU clear between items to ensure a proper temperature environment.
Certifications:| • UL/cUL/CB NOM – Mexico
• UL AR FCC Part 15 Subpart B
• UL, RCM -Australia, New Zealand • CCC – China
• UL – Morocco
Note: The power light on the front panel should remain solid when power is provided to the unit. A blinking power light indicates an overcurrent. If this occurs, unplug the main power connector from the unit for 30 seconds then reconnect the power to reset the unit. If the main power is connected and the power light is not on, the unit has overheated. If this occurs, unplug the main power connector from the unit for 30 seconds then reconnect the power to the unit.
2017 Harman. All rights reserved. AMX, AV FOR AN IT WORLD, HARMAN, and their respective logos are registered trademarks of HARMAN. AMX does not assume responsibility for errors or omissions. AMX also reserves the right to alter specifications without prior notice at any time.
The AMX Warranty and Return Policy and related documents can be viewed/downloaded at www.amx.com. 3000 RESEARCH DRIVE, RICHARDSON, TX 75082 AMX.com | 800.222.0193 | 469.624.8000 | +1.469.624.7400 | fax 469.624.7153 AMX (UK) LTD, AMX by HARMAN – Unit C, Auster Road, Clifton Moor, York, YO30 4GD United Kingdom? +44 1904-343-100 ? www.amx.com/eu/
Download PDF:AMX PS3.0 Power Supplies Adapter User Manual