ASUS EBG19P Gigabit PoE Plus VPN Wired Router User Guide
- June 17, 2024
- Asus
Table of Contents
- Router Overview
- Specifications
- PoE Consideration
- Safety Notices
- PoE Consideration
- Safety Notices
- Connection
- Support Wall Mount
- ASUS Recycling/Take Back Services
- REACH
- Federal Communications Commission Statement
- FCC RF Caution Statement
- Customer Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASUS EBG19P Gigabit PoE Plus VPN Wired Router
Router Overview
-
Power LED
-
PoE Alert LED
-
Reset button
-
USB 3.2 Gen 1 port
-
WAN (Internet) port
-
WAN/LAN ports (with PoE+)
-
LAN ports (with PoE+)
-
Power (DCIN) port
Specifications
DC Power adapter | DC Output: +54V with max 2.778A current |
---|---|
Operating Temperature | 0~40°C |
Operating Humidity | 10~95% |
PoE Type | 802.3at, Type 2, PoE+ |
PoE Consideration
The PoE and PoE+ power supplied by the switch is prioritized in ascending port order, with a total PoE and PoE+ power budget of 123W across port 2 to port 9.
LED Indicators
Link/Act LED (Left)| PoE LED (Right)
1G| Green| ON| Green
100M/10M| Amber| OFF| N/A
Sending or Receiving data| Blinking| |
Stander| 802.af (802.3at Type) PoE| 802.3at Type 2 PoE+| 802.3bt Type 3
4PPoE or PoE +| 802.3 bt Tpes 4 4PPoE or PoE++
---|---|---|---|---
Max. power reserved by the device| 12.95w| 25.50w| 51w| 71.3w
Max. power delivered to the device| 15.4w| 30w| 60w| 100w
SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development
Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause
undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°( (104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
- DO NOT mount this equipment higher than 2 meters.
The power supply cord (s) must be plugged into socket-outlet (s) that is/ are provided with a suitable earth ground.
Reboot modem and ensure its connection is ready
Notice: Unplug modem for 10 sec then plug back in.
PoE Consideration
The PoE and PoE+ power supplied by the switch is prioritized in ascending port order, with a total PoE and PoE+ power budget of 123W across port 2 to port 9.
SAR information on this device is on file with the FCC and can be found under the Display Grant section of www.fee.govIoet/ea/fccid.
Prohibition of Co-location
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
IMPORTANT NOTE:
Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with greater than 20cm between the radiator & your body.
WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm f rom all persons and must not be co located or operating in conjunction with any other antenna or transmitter.
Compliance Statement of Innovation, Science and Economic Development Canada (ISED)
This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)
Safety Notices
- Use this product in environments with ambient temperatures between 0°C(32°F) and 40°( (104°F).
- Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
- DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
- DO NOT place or drop objects on top and do not shove any foreign objects into the product.
- DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
- DO NOT cover the vents on the product to prevent the system from getting overheated.
- DO NOT use damaged power cords, accessories, or other peripherals.
- If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
- To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
- DO NOT mount this equipment higher than 2 meters.
The power supply cord(s) must be plugged into socket-outlet(s) that is/ are provided with a suitable earth ground.
Connection
-
Reboot modem and ensure its connection is ready
Notice: Unplug modem for 10 sec then plug back in.
-
Prepare your ASUS router and power it on
Once the power LED lights up, it’s ready for setup.
-
[App] Scan the code and download ASUS Expert WiFi app for setup
| |
---|---|---
| |
https://asus.click/asusexpertwifii
|
https://asus.click/asusexpertwifia
[Web] Open a web browser and navigate to http://expertwifi.net for web setup
Support Wall Mount
IMPORTANT! DO NOT mount this equipment higher than 2 meters.
NOTE: It is recommended to use screws with a size of PA5.7*2mm.
ASUS Recycling/Take Back Services
ASUS recycling and take back programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Caution Statement
WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
Customer Support
For detailed information, please refer to https://asus.click/
ExpertWiFiEbG19P