Shark UR2360S Matrix Plus Robot User Guide
- June 17, 2024
- Shark
Table of Contents
Shark UR2360S Matrix Plus Robot
Robot Setup
-
Set up Self-Empty Base
- Remove any plastic wrap and foam from the robot and base.
- Place the base in a location with a strong Wi-Fi signal.
- Dock LED will turn green when powered ON
Note: Check between the bumper and wheels to ensure all protective materials are removed before robot use. Place dock on clean, bare floor.
-
Attach Side Brush
- Note: Side brush design may vary.
-
Place Robot on Self-Empty Base
- Robot will turn on when properly placed on the dock.
- Dock LED will turn blue when the robot is charging
-
Scan QR code to download theSharkClean® app to complete the robot setup.
What’s Included
Two Easy Steps If You’re Stuck
- Visit the app or sharkclean.com/support:
- Owner’s Guide
- Troubleshooting
- How-To Videos
- FAQs
- Tips & Tricks
- For additional help, please scan the QR code to visit the digital Owner’s Guide or call 1-888-228-5531 for robot support
Maximize Your Robot Experience:
Tips and tricks for getting the most out of your robot.
- To manually turn ON/OFF your robot, hold down the DOCK button for 5-7 seconds.
- Clear the area of cords and wires before each clean.
- Always place your robot on a level surface when performing maintenance.
- Clean brushroll, charging contacts, and filter regularly.
2023 SharkNinja Operating LLC. SHARK and SHARKCLEAN are registered trademarks of SharkNinja Operating LLC. SHARK MATRIX is a trademark of SharkNinja Operating LLC. APPLE and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and Android are trademarks of GOOGLE LLC.
Read User Manual Online (PDF format)
Loading......