renkforce RF-5734672 LED Table Lamp Instruction Manual

renkforce RF-5734672 LED Table Lamp

Specifications

• Product: LED Table Lamp, Dimmable
• Model Number: 2867336
• Power Requirement: 5V/DC, 2A
• Protection Class: III

Product Information

The LED Table Lamp is a dimmable lamp suitable for indoor use only. It features touch controls for adjusting color temperature and brightness levels.

Product Usage Instructions

Safety Instructions

• Keep the lamp out of reach of children and pets.
• Do not expose the lamp to extreme temperatures, moisture, or direct sunlight.
• Do not look directly into the LED light.

Connection

1. Connect one end of the power cable to the DC input on the lamp.
2. Connect the other end of the charging cable to a suitable power supply with a USB power adaptor capable of delivering 5V/DC, 2A.

Operation
To operate the lamp:

• Touch to select color temperature: 3000K, 4000K, 6500K.
• Touch to switch power ON/OFF.
• Touch to select brightness level: low, medium, high.

Cleaning and Maintenance
Regularly clean the lamp with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.

Disposal
Dispose of the lamp according to local regulations for electronic waste disposal. Do not dispose of it in regular household waste.

FAQ

• Q: Can I use this lamp outdoors?
  A: No, this lamp is designed for indoor use only.

• Q: How do I adjust the brightness level?
  A: Simply touch the lamp to cycle through low, medium, and high brightness levels.

Operating Instructions

LED Table Lamp, Dimmable

• Item no: 2867336

Intended use

• The product is an LED table lamp with adjustable brightness and colour temperature.
• The product is intended for indoor use only. Do not use it outdoors.
• Contact with moisture must be avoided under all circumstances.
• If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, or other hazards.
• The product complies with the statutory national and European requirements.
• For safety and approval purposes, you must not rebuild and/or modify the product.
• Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
• All company names and product names are trademarks of their respective owners. All rights reserved. USB4®, USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Delivery contents

• Product
• USB-C® power cable
• Operating instructions

Operating instructions

Download the latest operating instructions from www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.

Description of symbols

The following symbols are on the product/appliance or are used in the text:

Safety instructions

Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.

General

• The product is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
• If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
• Maintenance, modifications and repairs must only be completed by a technician or an authorized repair centre.

Handling
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.

Operating environment

• Do not place the product under any mechanical stress.
• Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
• Protect the product from high humidity and moisture.
• Protect the product from direct sunlight.

Operation

• Consult an expert when in doubt about the operation, safety or connection of the product.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
  • is visibly damaged,
  • is no longer working properly,
  • has been stored for extended periods in poor ambient conditions or
  • has been subjected to any serious transport-related stresses.

LED light

• Do not look directly into the LED light!
• Do not look into the beam directly or with optical instruments!

Connection

Preconditions
You have a suitable USB power adaptor capable of delivering: 5V/DC 2 A

1. Connect one end of the power cable to the DC input on the product.
2. Connect the other end of the charging cable to a suitable power supply.

Operation

Cleaning

Important:

• Do not use aggressive cleaning agents, rubbing alcohol or other chemical solutions. They damage the housing and can cause the product to malfunction.
• Do not immerse the product in water.
  1. Disconnect the product from the power supply.
  2. Let the product cool down to ambient temperature.
  3. Clean the product with a dry, fibre-free cloth.

Disposal

This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-de-structive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point.

Distributors of electrical and electronic equipment are legally obliged to provide free take-back of waste. Conrad provides the following return options free of charge (more details on our website):

• in our Conrad offices
• at the Conrad collection points
• at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG

End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.

Technical data

This product contains a light source of energy efficiency class F.

• Input ……………………………………………… 5 V/DC 2.0 A, 8 W
• Power consumption…………………………. 6.5 W
• Energy efficiency …………………………….. 107 lm/W
• Protection class ………………………………. III
• LED……………………………………………….. 66 pcs: 3000 K (33 pcs) + 6500 K (33 pcs)
• Colour temperature………………………….. 3000 K, 4000 K, 6500 K
• Brighness
• max. 700 lm
• Operating conditions………………………… -20 to + 40 °C, 20 – 80 % RH (non-condensing)
• Storage conditions…………………………… -20 to + 50 °C, 20 – 80 % RH (non-condensing)
• Dimensions (W x H x D) …………………… unfolded: 150 x 130 x 370 mm
• folded: 318 x 130 x 370 mm

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2867336_V2_0823_dh_mh_en 9007200226256907-2 I2/O2 en

References

• Conrad Electronic » All parts of success
• Download center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>