fingers 2421 24 Satin Curve 60.4cm LED Monitor User Guide

June 17, 2024
fingers

fingers 2421 24 Satin Curve 60.4cm LED Monitor User Guide

 Important – Warnings & Safety Instructions

  1. Do not place the product near heat sources such as fire, radiators, stoves, light candles and other apparatus that
  2. produces heat.
  3. Use only those accessories supplied by FINGERS.
  4. Refer all servicing to qualified personnel. Servicing is required when the monitor has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warranty.

II. In the box

  • 1 x FINGERS Satin-Curve-2421 (LED Monitor)
  • 1 x FINGERS DC-300 (Power Adapter)
  • 1 x Screw Se
  • t 1 x Back Cover
  • 1 x HDMI Cable
  • 1 x Quick Start Guide
  • 1 x Monitor Stand Set
  • 1 x Brand Note

On-board Controls


 Installations Steps

  1.  As shown in 1, place a protective film or soft cloth on a flat table. Avoid any hard object such as screws on the table

  2. Then place the LED Monitor on a flat table shown in 2.

  3. As shown in 3 – Fix the support bracket using the screws provided and then tighten them with a screwdriver.

  4. As shown in 4 – Fix the base at the installed support bracket and place it on the table.

  5. Now the LED Monitor is ready to use.

Viewing Adjustment

To get the best viewing, we suggest you face the front of the monitor to adjust your perspective according to your personal preference. Please hold the monitor stand support during anglo adjustment to avoid directly touching the display. The display angle can be adjusted within -5° to 15° range.

Note:

  1. Make sure there are no objects surrounding the monitor before adjusting the monitor angle, to prevent the bump of the monitor screen with any objects during the adjustment.
  2. Make sure the monitor is on a flat table and not on an unbalanced surface during the adjustment.
  3. We recommend holding the base stand with one hand while gently adjusting

Care and Maintenance

  1. Unplug the monitor power plug before cleaning it.
  2.  Use the cleaning kit & spray the cleaning liquid on the cleaning cloth, and then gently wipe on the display surface.
  3. Use soft cloth to clean the surface.
  4. Plug in the monitor power plug after the cleaning process is complete and then switch on the monitor’s power.
  5. Do not use any chemicals, solvents, or cleaning solutions containing alcohol, ammonia, or abrasives.
  6. Do not allow any liquid to enter into any of the openings.

Tech Specs

fingers.co.in |

Images shown may vary from actual product. Specifications, features and appearance are subject to change without notice. Al logos, brands, trademarks and product names are properties of their respective owners. Product warranty is governed by warranty terms mentioned on www.fingers.co.in This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website www.fingers.co.in

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals