fingers Satin-2722 LED Monitors User Guide

Quick Start Guide
27
Satin-2722
68.58cm (27)

Important — Warnings and Safety Instructions

1. Do not place the product near heat sources such as fire, radiators, stoves, light candles and other apparatus that produce heat.
2. Use only those accessories supplied by FINGERS.
3. Refer all servicing to qualified personnel Servicing is required when the monito has been damaged in any way. Any evidence of any attempt to open and/or alter the device, including any scratch, peeling, puncturing, or removal of any of the labels, will void the Limited Warra

In the box

1 x FINGERS Satin-2722 (LED Monitor)
1 x Power Adapter
1 x HDMI Cable
1 x Monitor Stand Set
1 x Screw Set
1 x Quick Start Guide
1 x Brand Note

On-board Controls

1. Menu
2. Left(Down)
3. Right (UP)
4. Exit
5. Power

5 Buttons

Button| Function
MENU| Activate the OSD window / Activate the selected function
LEFT (DOWN)| Move down / decrease value
RIGHT (UP)| Move up  increase value
EXIT| Back o last menu, exit and save / Auto adjust.
POWER| Turn on / off the monitor

Installation Steps with Stand (Bundled)

1. Take out the stem and base. Place it on a flat work surface as shown in the below image.

2. Take out the Monitor body from the box.
   Place it on a flat work surface and keep the screen downward.

3. Take out four screws and plastic cap from the accessory bag. Fix the stand and monitor body with screws and then cover it with a plastic cap, as shown in the image. Now fix the V-Shaped base and stem with screws.
   ( Note:
   1. Screw is in the screw hole of the stem.
   2. There is a rubber tip covering the screw hole of the base.) Now LED Monitor is installed properly and s ready to use.

Steps to remove the Stand (Bundled)

1. Place the monitor upside-down on a flat table.
2. Loosen the screw and remove the base.
3. Remove the plastic cap and loose screws, then take out the stem.

Installation Steps with Adjustable Stand

(Optional, Separately Available)

1. Take out the stem and base and place it on a flat work surface as hown in the below image.
2. Keep the stem upside down and hold it with hand. Fix the stand with screws as shown in below image.
3. After fixing the base, take out LED Monitor and place it upside down. Fix the stand with LED Monitor.
4. Now LED Monitor is installed properly and s ready to use.

Steps to remove the Adjustable Stand

1. Remove the screws that are being fixed with monitor and stand.
2. After separating the stand, remove the stand base by removing screws which were connected on downward side.

Viewing Adjustments

To get the best viewing, we suggest facing the screen of the monitor and adjusting it to your perspective according to your personal preference. Please hold the Monitor stand support during angle adjustment to avoid directly touching the display. The display angle can be adjusted within -5° to 15° range.

Note:

1. Make sure there are no objects surrounding the monitor before adjusting the monitor angle, to prevent the bump of the monitor screen with any objects during the adjustment.
2. Make sure the monitor is on a flat table and not on an unbalanced surface, during the adjustment.
3. We recommend holding the base stand while adjusting the angle, and gently adjust the angle by holding top of the Monitor with another hand.
4. Now LED Monitor is installed properly and is ready to use.

Care and Maintenance

1. Unplug the power plug before cleaning it.
2. Use a Soft cloth to clean the surface.
3. Use the cleaning kit and spray the cleaning liquid on the cleaning cloth, and then gently wipe on the display surface.
4. Plug in the monitor power plug after the cleaning process is complete and then switch on the monitor’s power.
5. Do not use any chemicals, solvents, or cleaning solution having alcohol, ammonia, or abrasives.
6. Do not allow any liquid to enter any of the openings.

Tech Specs

Screen size
Maximum resolution
Colour
Refresh rate
Response time
Dynamic Contrast Ratio
Static Contrast Ratio
Brightness
Aspect ratio
Viewing angle
Pixel pitch
Lighting type| 597.7(H) x 336.3(V) mm
68.58 (27) cm
1920 x 1080
16.7 million
100Hz
12ms (Tr. + Tf.)
2000000:1
1000:1
200-250 cd/m2
16:09
H:178°/ V:178° (CR  ≥ 10)
0.3114 (H) x 0.3114 (V) mm
LED
Connecivity| Analog Input
Digital Input
Audio| VGA x 1
HDMI x 1
Audio x 1
Power| Power Consumption
Stand-by Power
Power Supply| ≤ 33 Watts (Max.)
≤1 Watts
DC 12 V—-3A
Environmental| Temperature (Operating)
Temperature (Non-Operating)
Humidity (Operating)
Humidity (Non-Operating)| 0°C to 50°C
-20 to +60°C
20% to 60% RH
5% to 90% RH
Features.| Tilt angle
Low Blue Mode
Flicker Free
Anti-Glare
Kensington Lock Support| -5 to +15°C
Yes
Yes (DC dimming)
Yes
Yes
Dimensions  and  weight| Wall Mountable
Monitor (W x H x D)
Net Weight| 10x 10cm
615 x 166 x 445 mm (L x W x H)
3.65 kg

fingers.co.in | Ver.: 1.0.0

• Images shown may vary from actual product.
• Specifications, features and appearance are subject to change without notice.
• All logos, brands, trademarks and product names are properties of their respective owners.
• Product warranty is governed by warranty terms mentioned on www.fingers.co.in
• This product falls under e-waste (Management & Handling) Rules, 2011. For proper disposal method, visit our website www.fingers.co.in

Documents / Resources

| fingers Satin-2722 LED Monitors [pdf] User Guide
2722, Satin-2722 LED Monitors, Satin-2722, LED Monitors, Monitors
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>