LEDSpace 8MM LED Strip Single Colour Cable Installation Guide

LEDSpace 8MM LED Strip Single Colour Cable

Specifications

• Product Name: LEDSpace LED Strip
• Contents: LED strip in dispenser box, cable, Maxilux Wi-Fi/RF interface, 7 solder-free connectors, Maxilux LED power supply, UK plug, and mains power lead
• Usage: Indoor use only
• Power Supply: Do not connect directly to 240V mains or wall socket

Safety Precautions

• Always test the LED strip before installing.
• Do not connect the LED strip directly to a 240V mains or wall socket.
• For installations involving mains supply, contact a qualified electrician.
• Ensure components are mounted in a well-ventilated position for long-term reliability and safety.
• Stick adhesive-backed LED strip to a grease-free, clean, and dry surface for effective adhesion.

LEDSpace LED Strip
Thank you for choosing this LEDSpace product.

Your pack contains
LED strip in dispenser box, cable, Maxilux Wi-Fi/RF interface, 7 solder-free connectors, Maxilux LED power supply, UK plug and mains power lead
NB: Wi-Fi/RF interface is not required/included for use with existing on/off or dimmer switches

Safety first

If fitting via your on/off or dimmer switches, or do you need to access the 240V mains supply, contact a qualified electrician. Always test the LED strip BEFORE installing. NEVER connect the LED strip directly to 240V mains or wall sockets. This equipment is for indoor use only. It should not be used in bathrooms or other wet areas.

Cutting incorrectly, twisting, treading on, or pressing the LED strip too hard when installing may impede its performance or prevent it from working at all. For long-term reliability and safety, make sure components are mounted in a well-ventilated position. Ensure the adhesive-backed LED strip is stuck to a grease-free, clean and dry surface to ensure effective adhesion.
NB: Please contact us within four days of receipt if, after testing, you find any faults with the equipment.

Putting your LEDSpace lighting system together – Numbers refer to installation steps

You will need

household scissors, pliers, wire strippers, flat- and cross-headed screwdrivers

1. Cutting to length
   Cut in a straight line across the centre of the cutting  points on copper contacts

2. Making connections

   • slide LED strip into slotted end of solder-free connector
   • insert wires into holes (no need to strip wire. Keep some cable for step 4)
   • crimp/pinch metal pins into wires and LED strip

3. wiring to the interface

   • strip ends of the cable
   • insert wires into terminals
   • retighten screws and give each wire a slight tug to check the secure connection

4. Wiring the power supply to the interface

   • repeat the steps above to wire up the input end of the interface (marked + and –)

5. wiring the power supply to the mains power lead

   • strip mains cable wires
   • unscrew terminal screws at 220–240V input end
   • insert wires: brown to live terminal and blue to neutral
   • retighten screws and check for secure connection Controlling your LED strip lighting

6. Control with a remote control, multi-zone wall switch, smartphone or smart speaker. Scan the QR code to download the app

Your interface will need to be programmed; please refer to the instructions supplied with the interface.

ledspace.co.uk/pack-help

Troubleshooting, data sheets, detailed instructions and tips Please scan the following QR code, which will take you to our help page.
support@ledspace.co.uk 02477 395995 16 Falkland Close, Coventry, CV4 8AU

References

• LEDSpace: Evoking Envy, Hue by Hue | Commercial Grade Lighting
• Installtion, Trouble Shooting & Tech Guides – LEDSpace

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>