LUNDERG Chair Alarm Wireless Sensor Pad User Guide
- June 17, 2024
- LUNDERG
Table of Contents
QUICK SETUP GUIDE
Chair Alarm System
Chair Alarm Wireless Sensor Pad
If you have any issue or question, contact us directly at
questions@lunderg.com
SCAN QR CODE
PLEASE watch the EASY TO FOLLOW instructional video at
www.Lunderg.com/chairvideo
https://www.Lunderg.com/chairvideo
Step 1 Turn ON the Monitor
Put batteries following + / – Close cover with screwdriver Turn ON
Step 2 Turn ON the Pad
Locate transmitter pocket and openit
Turn ON
Step 3 Pairing
Hold “PAIR” button for 2-6 sec until status light turns STEADY GREEN press &
Release the center of the pad while holding the monitor as image below Sensor
1* light blinks once to indicate pairing was successful 
“Sensor 2 or 3 if other
devices are paired
Step 4 Test
Press & Release again the center of the pad
ALARM MUST SOUND Cancel alarm by FIRMLY pressing “STOP” button If the Alarm
didn’t sound turn OFF the pad & monitor and go back to Step 1.
THE SYSTEM IS READY TO USE
Test the system by sitting down on the chair, wheelchair, recliner, or sofa,
and standing up before use with a loved one/patient.
Questions?
Contactus at questions@lunderg.com
We will reply you within 24 hours, 7 days a week!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>