PASYOU SR30 Squat Rack User Manual

User Manual PASYOU-SR30
SQUAT RACK

SAFETY INSTRUCTION

Thank you for selecting PASYOU SR30 Squat Rack. We wish it will provide you with perfect strength training.
In order to avoid getting hurt or causing damage to the equip­ ment, please read the manual and follow the safety instruc­tions before assemble and use this rack.

1. Please use this equipment in the correct way. There will be potential danger if this rack is used in the incorrect or inappropriate way.
2. The owner of this equipment should make sure that all users are clear about the safety instructions.
3. When training on this product, make sure there is enough space to move and air is fresh and circulated.
4. Please check carefully to see if all the connecting parts are tightened enough when assembling and before using. Especially those parts which are easy to wear.
5. Please wear suitable clothes for exercise when training. Don’t wear loose clothes which might restrict your using.
6. Do warm-up before training to avoid the muscle from being strained.
7. If you have dizziness, nausea, chest pain or other abnormal symptoms, STOP exercising immediately and seek medical treatment if necessary.
8. Minors should use this equipment for targeted exercise under adult supervision.
9. Keep children and pets away from the device. Do not leave children in the room with this device unsupervised.
10. When adjusting the position of the Adjustable Level, please make sure the screws and lock pin is inserted in the hole and fixed tightly on the tube.
11. Make sure all the connecting parts are fixed tightly enough before training.
12. To prevents from shaking and tipping, please set the equipment on the clean and flat ground, also keep it away from water and moisture.
13. Please keep this manual for future reference.

PART LIST

TOOL KIT LIST

ASSEMBLY INSTRUCTION

Step 1
Use 4 Screws (A9) to fix two Bottom Tubes (A4) and the Downside Connecting Tube (A3) together and tightened.

Step 2

1. Set one Bumper Gasket (A 13) on each Barbell Plate Setting Tube (AB).
2. Use two Bolts (A 10) and Gaskets (A 11) to fix two Barbell Plate Setting Tubes (AB) on two sides of Downside Connecting Tube (A3).

Step 3

1. Use four Screws (A9) to assemble the Long Column (A 1 ), Short Column (A2) and Column-Connecting Tube (A5) on the left side together. Assemble the parts on the right side in the same way.
   NOTE: Do Not tighten all the screws in this step.![PASYOU SR30 Squat Rack

• ASSEMBLY 4](https://manuals.plus/wp-content/uploads/2024/02/PASYOU-SR30 -Squat-Rack-ASSEMBLY-4.png)

  2. Set the Long Adjustable Column (A6) at the top in the 7th hole. Set the column on the right side in the same way, then tighten the Long Adjustable Columns on both sides.

Step 4
Use 4 Screws (A9) to fix the combined columns on both sides on the two Bottom Tubes and tighten them. Then tighten all the screws in Step 3.

Step 5
Set 2 Short Adjustable on Column on the rack at the proper height position.

PASYOU_SUPPORT
Ningbo Shuntai Health Technology Co., Ltd.
Please read the User Manuals carefully before using the product.
For customer service, please contact:
Email: support@pasyoufit.com

Documents / Resources

| PASYOU SR30 Squat Rack [pdf] User Manual
SR30 Squat Rack, SR30, Squat Rack, Rack
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>