SOVOL SV07 Plus Large Klipper 3D Printer Max Speed 500mm/s User Manual
- June 17, 2024
- SOVOL
Table of Contents
SOVOL SV07 Plus Large Klipper 3D Printer Max Speed 500mm/s
Product Usage Instructions
Assembly
Install the Gantry
Secure the gantry frame on the base using M5X45 and M5X20 screws. Be cautious not to damage any wires in the installation area.
Install the Touchscreen
Attach the screen bracket to the base with M4x16 screws, then mount the touchscreen on the bracket.
Install the Extruder Kit
Mount the extruder kit on the backplane and secure it with M3X10 screws.
Install Fan Kit
Fix the fan kit on the X-axis beam using M5X20 screws, ensuring the air outlet is positioned correctly.
Install Filament Holder
Attach the filament holder to the top profile groove and secure it with an M4 X 16 screw.
Check
After assembly, perform checks on the extruder, hotbed, XY belt, and extrusion arm to ensure everything is in place.
Touchscreen
Utilize the touchscreen interface for various functions like homing, temperature control, extrusion, configuration, bed leveling, and more.
Frequently Asked Questions
- Q: What should I do if the touchscreen is unresponsive?
- A: If the touchscreen is unresponsive, try restarting the printer and checking the cable connections between the touchscreen and the mainboard.
- Q: How do I calibrate the Z-axis?
- A: To calibrate the Z-axis, access the Z Calibrate option in the touchscreen menu and follow the on-screen instructions to adjust the bed level.
User Manual
SOVOL
Dear customer,
Thanks for choosing the Sovol printer! Sovol is committed to providing
excellent machines for 3D printing enthusiasts all over the world. This manual
is specially made for SV07 Plus users to start their SV07 Plus printing
journey. Even if you are very familiar with 3D printing technology, we still
recommend you to read this manual carefully. There are lots of important
information about the SV07 Plus in this manual to help you to understand how
to get better printing experience. You can also find many helpful tutorials on
the official website and user groups. Please Scan the QR code below to enter
the website or user group.
Do not use the printer any way other than described here in order to avoid
personal injury or property damage. Do not place the printer in the
environment with large vibration or other instability. The shaking of the
machine will affect the printing quality of the printer. Please do not place
the machine near inflammable and explosive materials or near highheat source.
Please place the machine in a ventilated, cool and dust free environment. It
is recommended to use the material recommended by the manufacturer to avoid
machine damage. Do not use any other power cable except the one supplied.
Always use a grounded three-prong power outlet. Do not wear cotton gloves when
operating the printer. Such cloths may become tangled in the printers moving
parts leading to burns, possible bodily injury, or printer damage. Please wait
a moment to remove the print after the print is finished. It’s not recommended
to use the third party firmware or mainboard etc, or the warranty will be
void. Clean the printer frequently. Always turn the power off when cleaning,
and wipe with a dry cloth to remove dust, adhered printing plastics or any
other material off the frame, guide rails, or wheels. Use glass cleaner or
isopropyl alcohol to clean the print surface. Children under 10 years should
not use the printer without supervision. Do not manually move the extruder and
printing platform while printing. Users should comply with the laws and
regulations of the corresponding countries and regions where the equipment is
located (used), abide by professional ethics, pay attention to safety
obligations, and strictly prohibit the use of our products or equipment for
any illegal purposes. Sovol will not be responsible for any violators’ legal
liability under any circustance.
01
Parameters
Model Software Language Print Method Molding Nozzle Quantity Build Volume Recommend Printing Speed Printing Accuracy Nozzle Diameter Nozzle Temperature Hotbed Temperature Supporting Materials Material Diameter Support File Format Voltage Operation System Power
SV07 Plus English USB flash drive, Wifi connection FDM 1 300300350mm 250mm/s
±0.1mm 0.4mm (Replaceable) 300 100 PLA/ABS/PETG/TPU/WOOD 1.75mm G-code
Input:115/230V 50/60HZ Output:24V Windows,Linux,Mac MW 600W/24V
02
Package List
Package List-1
Gantry
Base
Extruder Kit
Fan kit
Touchscreen
Accelerometer
PC sticker
Filament Holder
Power Cable
03
Package List
Package List-2
M5X454
2 pcs 4 pcs M5X206
M4X164 M3X161
M3X104 Zip Tie10
M4 Locknut*4
Spacer*4
Leveling spare parts
M4X30*4
PULL
Socket Spanner Wrench Diagonal pliers
Allen Wrench
Spatula
Nozzle Cleaner Neddle
Cross Screwdriver
Slotted Screwdriver
Spare Nozzle
USB Flash Drive Tweezers
04
Assembly
Install the Gantry
1 Install the gantry frame on the blue marked area of the
base, lock two M5X45 screws and two M5X20 screws from the right side and left
side of the base.
Please use this screw head type for M5X20 screws here
M5X45 M5X20
Be careful when installing the gantry to not crush the wires near the installation area.
05
Assembly
Install the Touchscreen
1 2 Secure the screen bracket on the right of the base with two M4x16
Use another M4X16 screw to fix the side of the bracket.
screws.
The ports are on the bottom
3 Install the touchscreen on the bracket.
4
Slide the touchscreen downwards to attach it to the bracket.
06
Assembly
Install the Extruder Kit
1 Intall the extruder kit on the backplane.
Please hold the extruder kits while installing it, in case loosing the parts
or break the extruder.
1
4
3
2
2 Screw in four M3X10 screws from the back of the
back plate to fix the nozzle kit on the extrusion back plate.
07
Assembly
1
Install Fan Kit
2
There are two screw holes on the back of the X-axis beam.
Please use this screw head type for M5X20 screws here
When installing, the air outlet should be located at the lower end and blow to
the nozzle.
1 Use two M5X20 screws to install the fan kits on the
back of the X-axis beam.
08
Assembly
Install Filament Holder
1 Snap the front buckle of the
filament holder to the front of the top profile Groove.
2 Push the filament holder
back.
3 As shown in the above figure,
place the lower tab of the filament holder into the groove at the rear of the
top profile.
09
4 Insert an M4 X 16 screw
and tighten to fix it on the top profile.
Assembly
Connect Wires-1 Filament Sensor(1)
Use cable ties to tie Extruder Kit
A B1 or B2
A B1 B2
Touch Screen
10
Assembly
Use cable ties to tie Sticker position
Connect Wires-2
2P Fan Kit
X
3P Filament Sensor(2)
Z2
Y
Z1
Please select the correct input voltage to match your local mains230V or 115V).
11
Assembly
Install Accelerometer X Part
The accelerometer is an optional module, you can choose whether to install it according to your needs.
To measure the X-axis acceleration, the following is the installation position of the accelerometer.
1 Unscrew the screw on the upper left corner of the back
of the spray head kit.
2 Mount the accelerometer using a M3X16 screws as shown.
Please note that the direction of the acceleration should not be reversed.
Refer to the direction indicated by the XY coordinate axis as shown. The
accelerometer should be installed squarely, flush with the sides of the
nozzle, not skewed.
12
Assembly
Install Accelerometer Y Part
To measure the Y-axis acceleration, the following is the installation position of the accelerometer.
1 Unscrew the screws here.
2 Mount the accelerometer using a M3X16 screws as shown.
Please note that the direction of the acceleration should not be reversed.
Refer to the direction indicated by the XY coordinate axis as shown. The
accelerometer should be installed squarely, flush with the sides of the
hotbed, not skewed.
13
Check
Check Extruder
1 Hold the whole extruder, and shake it to check out if it is
stable, if it is loose, please adjust by following the steps below.
Eccentric nut (Blue mark)
If the extruder is loose or shake in the future, you can also adjust your
extruder by this way.
2 Turn the eccentric nut with wrench to adjust the tightness
of the extruder until when the X axis move, the extruder won’t shake too much.
14
Check
Check Hotbed-1
Shake
Shake
1 Hold the left and right of the hotbed with your hands,
shake the hotbed repeatedly, while raising one side, press another side to
check out the stability of the hotbed. If the hotbed is too shaken or tilted
too much, please adjust it according to the method on the next page.
15
Check
Eccentric nut (Blue mark)
Check Hotbed-2
Left
If the hotbed is loose or shake in the future, you can also adjust your hotbed
by this way.
2 Turn the eccentric nut with wrench to adjust the tightness
of the hotbed until when the Y axis move, the left and right of the hotbed
won’t shake too much.
16
Check
Check XY Belt
1 Pull the XY-axis synchronous belt to check the tightness, if
it is too loose or too tight, please adjust it to the appropriate tightness by
turning the belt tensioner.
X
Y
17
Check
Check Extrusion Arm
1
Please press the extrusion arm several
times to check out its
tightness
2
If it too loose or too tight, you can use the
screwdriver to turn the
screw here to adjust its
tightness.
18
Touchscreen
Pins Definition
DC12~24V
USB2.0 USB3.0
Accelerometer Type-C Power
USB2.0
Accelerometer pin definition:
SCK DI DO 3-A7 3V3 GND
Power: Press the Power button for more than 5s at power on
satus, the klipper system will closed.
Press the Power button for 1s at power off status, it will
power on.
After closing the klipper system, the printing will be stopped,
even though you didn’t turn off the machine’s power.
19
Touchscreen
Nozzle, hot bed Real-time
temperature preview
Model|Current Menu
Time
Main Menu
Nozzle TempClick number to adjust nozzle temp
Hotbed TempClick number to adjust hotbed temp
Temperature curveClick on the names of “Extruder” and “Heater Bed” above to
turn on and off their temperature curves
Main menuPlease read the following introduction.
Emergency stop
Print Bottom option
Macros
Homing
Back
20
Touchscreen
Homing
Homing
X+:Move X axis to right X-: Move X axis to left Y+: Move Y axis forward Y-: Move Y axis backward Z+:Move Z axis up Z-:Move Z axis down
1. X/Y/Z axis all auto home 2. X/Y axis auto home 3. Z axis auto home 4.
X/Y/Z axis’s current
coordinates
5. The number of steps per move 6. Settings 7. Reverse the movement
direction 8. Adjust the speed of moving X/Y axis
9. Adjust the speed of moving Z axis
Settings
21
Touchscreen
Temperature
Temperature, Actions
1. Cancel heating for all 2. Adjust temperature 3. Preheat PLA195/40 4. Preheat ABS220/90
Actions
1. Read more details on page 22.
2. Open/Close cooling fan. 3. Check out the macro
command. 4. Disable motor (If you
need to manually move the XYZE axis, you can use this operation). 5. Open
Console to check out or input the command.
22
Touchscreen
Extrude
Extrude
When temp is not enough, it is not allowed to have related operation
about the extruder. 1. Nozzle real-time temperatureclickTemperature to
adjust
temperature. 2. Extrude: extrusion filament
Retract: retract filament 3. Load: Execute a macro command to load filament.
Unload: Execute a macro command to withdraw the filament 4. Distance: The
extrusion distance/ retraction distance. 5. Speed: The extrusion speed/
retraction speed. 6. Filament Sensor On/Off
23
Touchscreen
Configuration
Configuration, Machine Leveling, Led
Machine Leveling
1. Limits 2. Network 3. System 4. Save configuration 5. Settings 6. Input
Shaper
Led
1. Z Calibrate 2. Bed level 3. Z Tilt 4. Bed Mesh
1. LED Off 2. LED On
24
Touchscreen
Limtis
Limits
1. Max Acceleration
2. Max Deceleration
3. Max Speed
4. Square Corner Velocity
Click the number on the
right side of the value
bar to enter the value
manually
We have adjusted to the best settings for you out of the factory, if you do not know these parameters very well, please do not change the parameters arbitrarily, in case cause the printing failure.
25
Touchscreen
Network, System
Network
XXXXX 123.123.12.123 XXXXXXXXXXXXXXXX
You can choose your wifi to connection, After connecting to Wifi, you can
check the IP address of this machine here. Enter this IP address in the
website address column of the brower to enter the printing page.
The network PC/mobile /tablet needs to be under the same router as the network
of printer, so that they are able to connected remotely.
System
1. Full Update 2. Restore factory 3. Restart 4.Shutdown
26
Touchscreen
Save config, Settings
Save config
Save the current configuration, the system will restart.
Settings
27
Touchscreen
Z Calibrate
Z Calibrate
1. Start Z calibrate 2. The value of Z calibrate 3. Raise nozzle according to
the setted height 4. Apply the settings (Saving settings requires a system
restart) 5. Lower nozzle according to the setted height 6. Abort Z calibrate
7. Set the distance of per movement
28
Touchscreen
Bed Level
Bed Level, Bed Mesh
Bed Mesh
1. Only disable XY axis motors 2. Start leveling the corners 3. Corners leveling data
1. Add profile 2. Clear the saved leveling data in
current profile 3. Start calibrate 4. Leveling data preview 5. Current profile
name 6. Delete current profile
29
Bed Leveling
Bed Leveling-1
1. Tighten the all leveling nut counterclockwise until it is as tight as
possible,Then turn clockwise to loosen two turn.
2. After finish adjustment, Click Machine leveling on the home page.
3. Click Z calibrate.
30
Bed Leveling
Bed Leveling-2
Please do not move a large distance at one time to avoid the nozzle hitting
the hotbed.
1. Click start, the printer will auto home first. 2. After the printer auto
home, the nozzle will slowly move to the center of the
bed,put a piece of A4 paper between the nozzle and the hotbed. 3. Select the
suitable move distance then click raise nozzle or lower nozzle ,
to adjust the distance between the nozzle and the hotbed. 4. Adjust the
distance between the nozzle and the hotbed (please keep pulling the
paper during the period, when you feel resistance to pulling the paper and the
nozzle does not completely press the paper, the distance is appropriate. 5.
Click accept to apply the values, then confirm and restart the system.
31
Bed Leveling
Bed leveling-3
1. After finish adjustment, Click Machine Leveling on the home page.
2. Click Bed Level.
3. Click lower left corner area, Let the Nozzle move to the lower left
corner.
32
Bed Leveling
Bed leveling-4
~0.2mm
1. Put a piece of A4 paper between the nozzle and the hotbed, adjust the distance between the hotbed and the nozzle by adjusting the leveling knob under the hotbed. When you drag the paper between the nozzle and the hotbed, if the nozzle can scratch on the paper slightly, that means the distance between the nozzle and the hotbed is suitable.
2. ClickScrews Adjust, the printer starts to detect the four corners.
33
Bed Leveling
CW 00:01 Reference
CCW 00:01 CW 00:02
Bed leveling-5
1. You can see your detection results in the blue box mark in the picture,
the letter at the beginning means you need to adjust the orientation, The
lower left corner is the reference corner, and the other corners are based on
this corner.
CW: Need to turn clockwise CCW: Need to turn counterclockwise
The time after means how many turns you need to rotate.
60 minutes for a lap
Tips: Please click “Screws Adjust” several times to adjust, just adjust the
value of each corner within 00:10.
For example:
When one of your corners
is shown as”CW 00:15″,
then you need to turn the
knob clockwise about
15 60
*360
degrees
as
shown in the image on the
left.
34
Bed Leveling
Bed leveling-6 1. Click Machine Leveling .
2. Click Bed Mesh, then click Calibrate after the detection is complete,
restart the system, Leveling complete.
If you want to view the bed mesh data later, please return to this interface
and click the current configuration name “default” to view
35
Bed Leveling
Bed leveling-7
1. The bed mesh data reflects the concave and convex of the hotbed. The
detection data divides the hotbed into 25 small areas to detect the concave
and convex. When 0 means flat, the positive value is relatively high, and the
negative value is equivalent to low. to reflect the levele of the hot bed, and
the subsequent printer will adjust the offset value between the nozzle and the
hot bed based on these data to compensate
+0.04
+0.02 0
-0.04
36
Configuration
Change Configuration
2 1
3
1. If you want to change the printer configuration, after entering the web
page by IP, click the “configuration” option on the left menu bar
2. Click the “Printer.cfg” file to configure 3. After the configuration is
complete, click the “SAVE &
RESTART” option (the klipper system will restart) 37
Load/unload filament
1. Click Actions on the home page.
2. Click Extrude.
3. Then insert the filament in to the extruder, click load, the extruder
will load the filament automatically, if you need custom adjustment. click
Extrude , Retract , Distance or Speed to adjust.
Each machine has been tested before leaving the factory, and it is normal to
have residual filament in the nozzle.
When the nozzle temp is so low, it is not allowed to have related operation
about the extruder. Please pre-heat nozzle first.
38
1. You can remotely upload files on the web page and print, or directly insert a U disk into the USB port on the display to print. It takes about 3~5S to read the U disk, please wait patiently
When this icon appears, it means it is a folder.
2. Click “Print” on the main interface. Then click the print icon or the STL thumbnail to print.
Delete Print
It is recommended that you fine-tune the Z offset value again according to the
actual situation when printing
Tips:
Print failed!
PC stickers When you often fail to print the model because the hotbed is non-
stick, you can try to paste PC stickers on the PEI plate to use
39
Main board
12 3 4 5 6
7
22 21
20
8
9 10 11
12 13 14
19
18
17
16
15
+ Positive – Negative
1: Z Limit 2:Y Limit 3: X Limit 4: Hotbed thermistor
5: Chamber thermistor
6: Filamnet runout sensor
7: Extruder kit cable
8: LED
9: Case fan(24V)
10: 7025 fan(24V)
11: Hotbed Power
12:Power(24V)
13: Fuse
14: Screen Power(24V)
15: X Motor 16: Y Motor
17: Z2 Motor 18: Z1 Motor 19: SD card 20: Shutdown module
21: Type-C 22: No Limit/Limit Switch
NOTE: 5,8,20 are reserved ports, and they are not connected to any
parts out of factory.
40
Sovol Support Group
sovol3d.com
SHENZHEN Lian Dian Chuang Technology CO.,LTD. Official websitesovol3d.com Emailinfo@sovol3d.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>