Dongzhen BL-XK01 Galaxy Light Music Starry Projector User Manual
- June 5, 2024
- Dongzhen
Table of Contents
Dongzhen BL-XK01 Galaxy Light Music Starry Projector
Unboxing Check
Thank you for purchasing our products, please read the instruction manual
carefully before use. The instruction manual contains necessary safety advice
and user instructions, follow the instruction manual to operate in order to
avoid damaging the product for misuse. Check whether the product is damaged or
not when you receive the product.
Package list:
- Music starry projector x1
- Remote controller x 1
- USB cablex1
- User manual x1
Warnings
The power requirement of this product is UsB Dc 5V/2A Once the range exceeded,
please use the regulator devise, otherwise it l affect its servic life
Notice:
- Strictly in accordance with the instructions of this operation, do not disassemble the host and accessories.
- This product is suitable for indoor use.
- The product is projected by LED and laser combinations. please do not use laser shone directly in eyes and keep away from children.
How to use:
- Indoor use, projecting in the sky direction
- How to use the light projector, as shown below
- Connect Bluetooth “BTK10” of the smartphone to play music.
- Use correct method of the remote control to make sure the remote control is pointing at the infrared sensor
Host button function description
-
Automatic recognition of USB data. Note that this projector can auto recognize
and play music while inserting USB memory. USB should contain some song9s -
Ocean wave 3 levels brightness adjustment
When Power on, LED light and laser light keep on: short press this key control LED light switch, long press control laser light switch -
DC Input: 5V/2A
-
Short press play the previous song: Long press reduces the volume
-
Short press play next song: Long press increases volume
-
Short press control music Play/Pause; Long press change USB to Bluetooth( Connect Bluetooth and U-Disk at same time, it’ll recognize U-Disk music for priority)
-
Short press achieve Bluetooth/US8 mode switch when connecting Bluetooth and USB at the same time
-
Power ON/OFF
Statement
This product has been comprehensive and rigorous tested at the factory, the
user Nshould strictly follow the warning and instructions. Improper use
resulting in product damage is not covered by the Company’s warranty.
Remote control function description
Instruction:
When projector light connects power; LED blue light keeps on and in non-moved
Nstatus; laser light enters gradation mode, it can default automatically
switch off in 4
-
Control LED Ocean wave light ON/OFF
-
Control Laser light ON/OFF
-
Press “R,red light ON; Press again, red light OFF (at basic of light on at first time)
-
Press “G”.green light ON; Press again, green light OFF (at basic of light on at first time)
-
Press “B”, blue light ON; Press again, blue light OFF (at basic of light on at first time)
-
Press “w ,white light ON: Press again, white light OFF (at basic of light on at first time)
(Note: Four color RGBW buttons can be combined by two to form a double- color projection) -
Control device volume up
-
Control device volume down
-
Select playing previous song
-
Select playing next song
-
Voice control: Connect with Bluetooth or USB memory playing music. press “Micro’ icon, ocean wave and star light will fast-changing following music sound
-
Control ocean wave moving speed up (Pause-Slow–Medium-Fast)
-
Control ocean wave moving speed down (Fast–Medium–Slow–Pause)
-
Long press 3 seconds to cancel timing function. When LED, laser light flash and
emit bleep sound three times as prompting -
Press FADE 1 Ocean wave move circularly in R-G-8-W single color mode
and laser light changed to gradation mode (the same feature as power On) -
Press FADE 2″ ocean wave move circularly in RB-RG-RW-BG-BW-Gw double-color mode and laser light changed to gradation mode
-
Long press 3s control timing function for 1 hour. When LED, laser light flash and emit “bleep” sound once time as prompting.1 hour later, it l automatically Switch off
-
Control LED ocean wave light brightness (In order of 70%–40%–40%–70 100%)
-
Press “LASER light” achieve either Laser light stay on or enter into gradation mode
-
Long press 3s control timing function for 2 hours. When LED, laser light flash and emit “bleep sound 2 times as prompting. 2 hours later, it ll automatically switch off
-
Control Music Switch On/Off
Notice:
This product comes with 4 hours automatic shutdown function that is work for 4 hours and shut down automatically
Specification
- Maximum LED Power: 2 4W
- Green Laser: < 1MW
- Power Input: USB DCSV/ 2000mA
- Operating Temperature: 14’F 104’F (-10’C40’C)
- Projection Coverage 161-538 ft (15-50nf)
- Product Dimensions: 123 164 mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>