Thundercomm C4290 TurboX Development Kit User Guide
- June 17, 2024
- Thundercomm
Table of Contents
Thundercomm C4290 TurboX Development Kit
Product Information
Product Specifications:
- Brand: Thundercomm
- Model: TurboX C4290 CM4290 Development Kit
- Package Contents:
- Interposer Board (With C4290/CM4290 SOM)
- Main IO Board
- Audio board
- Sensor Board
- Wi-Fi/BT Antenna
- GPS Antenna
- Cellular Antenna (x 2)
- Camera Module
- LCD Touch Panel (only in advanced DK package)
- Power Adapter
Product Usage Instructions
Main Board:
The main board features various interfaces including USB ports, camera
interfaces, HDMI out, PCIe expansion module connector, SD card slot, and more.
Interposer Board:
The interposer board includes keys for volume control, power on, and force USB
boot, camera module connector, DIP switches for board function control, FM
antenna connector, and more.
Audio Board:
The audio board is equipped with speaker connectors, a DMIC connection
selection switch, an audio board configuration switch, an ear-out connector, a
line-out connector, and more.
Sensor Board:
The sensor board features an NFC antenna connector, and various sensors
including an ALS+ Proximity sensor, Magnetic sensor, ACC+GYRO sensor, Pressure
sensor, SAR sensor, and battery connector.
Frequently Asked Questions:
-
Q: What is included in the standard DK package?
A: The standard DK package includes the Interposer Board, Main IO Board, Audio Board, Sensor Board, Wi-Fi/BT Antenna, GPS Antenna, Cellular Antenna (x 2), Camera Module, and Power Adapter. Note that the LCD Touch Panel is not included in the standard DK package. -
Q: Which interfaces are available on the CM4290 only?
A: The Wi-Fi/BT Antenna, GPS Antenna, and Cellular Antenna interfaces are available on CM4290 only.
Package List
NOTES:
- Available on CM4290 only.
- All the listed parts are included in the advanced DK package. LCD Touch Panel is not included in the standard DK package.
Development Introduction
Main Board
1| 12V DC jack input, 2.5mm/5.5mm| 11| Camera interface #3 (NC) | 20| SD card
slot| 29| 90-pin B2B connector, for camera interface extension
---|---|---|---|---|---|---|---
2| UART debug port, UART to USB| 12| Camera interface #0| 21| 6-pin switch,
boot configuration| 30| LCD0 interface
3| USB Type-A port | 13| Camera Interface #1| 22| Key, Force USB boot button|
31| 90-pin B2B connector, for display interface
extension *
4
| ****
USB Type-C port
| ****
14
| LED4408, Flash LED #3 *
LED4409, Flash LED #2
LED4410, Flash LED #1
| ****
23
| ****
Key, Volume up button
| ****
40
| ****
DIP switches for board function control
5| HDMI out interface, 2.0| 15| Nano SIM card slot #2 | 24| Key, Volume down
button| 41| Power slide switch
7| PCIe expansion module connector | 16| Nano SIM card slot #1 *| 25| Key,
Power on button| 42| VDISP0_P/M_OUT
VDISP0_P/M_OUT_B
8| Camera interface #5 (NC) *| 17| Micro USB port| 26| RGB LEDs from PMIC| 43| SW3601
SW3602
9
| ****
Camera interface #4 (NC) *
| ****
18
| ****
RGB LEDs from GPIO *
| ****
27
| Low-speed connector to low-speed expansion board
4 x 80-pin B2B connector
| ****
44
| ****
Home button *
10| Camera interface #2| 19| 500-pin connector to the Interposer Board| 28| LED4401, indicating Main Board 4V2 OK
LED4403, indicating SOM power input OK
| –
indicates that these interfaces are unavailable on C4290.
Interposer Board
1| Key, Volume down button| 6| Power supply indicator| 11| Wi-Fi/BT antenna
connector
---|---|---|---|---|---
2| Key, Volume up button| 7| Camera module connector, CSI0 *| 12| UART debug
port, UART to USB
3| DIP switches for board function control (including camera, USB)| 8| FM
antenna connector| 13| VBUS
Green: indicating debug USB status
4| Key, Power on button| 9| GPS antenna connector| 14| Type-C for debug
5| Key, Force USB boot button| 10| C4290 SOM| –
This connector is reserved for internal CSI signal test only and is thus unavailable to users, please contact us if you need it.
Audio Board
1| Low-speed connector to low-speed expansion board
4 x 80-pin B2B connector
| 6| Left WSA881x speaker connector | 11| Analog microphone connector 1
---|---|---|---|---|---
2| DIP switch for DMIC connection selection| 7| Right WSA883x speaker
connector | 12| Analog microphone connector 3
3| DIP switch to control Audio Board configuration| 8| Left WSA883x speaker
connector | 13| Headset connector
4| Speaker connector| 9| Ear out connector | 21| Low-speed connector to Main
Board
4 x 80-pin B2B connector
5| Right WSA881x speaker connector| 10| Line out connector| 11| –
C4290 uses WSA8815 as the speaker amplifier, and thus J3301M and J3300M are available for C4290 speaker connection.
Sensor Board
1| Low-speed connector to low-speed expansion board
4 x 80-pin B2B connector
| 5| ACC+GYRO sensor, LSM6DS3TR-C| 9| CAN connector (NC)
---|---|---|---|---|---
2| NFC antenna connector| 6| Pressure sensor, BMP280| 10| FAN connector
3| ALS+ PROXIMITY sensor, TMD2755| 7| SAR sensor (NC)| 21| Low-speed connector
to Main Board
4 x 80-pin B2B connector
4| Magnetic, AK09915C| 8| Battery connector| 22| DIP switch
Let’s Get Started
Follow the steps below to boot up your device.
- Remove the interposer board, sensor board, and main IO board carefully from the package.
- Connect the interposer board to the main IO board.
- Connect the sensor board to the main IO board.
- Connect the power adapter to the board assembly via 12V DC in jack (connector 1 on Main Board).
- Connect the board assembly to a computer via
- USB Type-C port (connector 4 on Main Board) if adb tool, supported by Android operating system, is needed.
- UART debug port (connector 2 on Main Board) if debug function is needed.
- Long press the Power on button (connector 25 on the Main Board) to boot up the device.
Notices and trademarks
Thundercomm may have patents or pending patent programs covering the subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries to service@thundercomm.com.
THUNDERCOMM PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimers of express or implied
warranties in certain transactions; therefore, this statement may not apply to
you.
Changes are made periodically to the information herein; these changes will be
incorporated in new editions of the publication. To provide better service,
Thundercomm reserves the right to improve and/or modify the products and
software programs described in the manuals, and the content of the manual, at
any time without additional notice. The software interface and function and
hardware configuration described in the manuals included with your development
board or system on the module might not match exactly the actual configuration
that you have purchased. For the configuration of the product, refer to the
related contract (if any) or product packing list, or consult the distributor
for the product sales. Thundercomm may use or distribute any of the
information you supply in any way it believes appropriate without incurring
any obligation to you.
The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Thundercomm product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Thundercomm or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.
The information in this document should not be as an invitation for an offer or any advice to the visitors. Please consult the professional comments from the sales consultant before doing any actions of investment or purchase. Thundercomm may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Thundercomm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Thundercomm product, and use of those Web sites is at your own risk. Thundercomm shall not be responsible for the content of the third party.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development- level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Thundercomm and the property right of the date mentioned in this document, including but not limited to trademarks, patents, copyrights, trade names etc. are not covered by any open-source license. Thundercomm may update this document at any time without notice.
Anyone doesn’t have the right to amend, reprint, republication, reproduce, transmit, distribute or any other way to use this document for business or public purposes without the prior written consent of Thundercomm. E-mail messages sent to Thundercomm via the Internet are not guaranteed to be completely secure. Thundercomm shall not be liable for any loss incurred by the surfer when transmitting any information over the Internet or for any loss incurred by Thundercomm when sending any information over the Internet at your request. Thundercomm has all rights under other relevant exemptions provided by laws and regulations, and Thundercomm’s failure to claim or delay in claiming such rights shall not be deemed to be a waiver of such rights by Thundercomm. Thundercomm reserves the right to the final interpretation of this document. Thundercomm, Thundercomm Turbox, TURBOX, and Thundersoft Turbox are trademarks of Thundercomm Corporation or its associate companies in China and/or other countries. All other trademarks are the property of their respective owners.
Contact us
- Email: service@thundercomm.com
- Address: 1601 McCarthy Blvd Suite R-12 Milpitas CA,95035
- Support software and documentation downloads: www.thundercomm.com.
Empowering Every IoT Device with Our Technology.
References
- Thundercomm - World leading IoT product and solution provider
- Thundercomm - World leading IoT product and solution provider
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>