hansgrohe Finoris 110 Single Lever Basin Mixer Instruction Manual
- May 15, 2024
- hansgrohe
Table of Contents
Finoris 110 Single Lever Basin Mixer
Instructions for use / Assembly instructions 
Safety Notes
Gloves should be worn during installation to prevent crushing and
cutting injuries.
The product may only be used for bathing, hygienic and body cleaning
purposes.
**** The hot and cold supplies must be of equal pressures.
Installation Instructions
- Prior to installation, inspect the product for transport damages. After it has been installed, no transport or surface damage will be honoured.
- The pipes and the fixture must be installed, flushed and tested as per the applicable standards.
- The plumbing codes applicable in the respective countries must be observed.
- The drain valve must only be used as intended. It is not allowed to attach other objects to the drain valve, for example a semi-pedestal.
Technical Data
Operating pressure: max. 1 MPa
Recommended operating pressure: 0,1 – 0,5 MPa
Test pressure: 1,6 MPa (1 MPa = 10 bar = 147 PSI)
Hot water temperature: max. 60°C
Thermal disinfection: 70°C / 4 min
The product is exclusively designed for drinking water!
Symbol description
Do not use silicone containing acetic acid!
Adjustment (see page 36)
To adjust the hot water limiter. Using a hot water limiter in combination
with a continuous flow water heater is not recommended.
Dimensions (see page 40)
Flow diagram (see page 43)
Spare parts (see page 44)
XXX = Colors
000 = Chrome Plated
670 = Matt Black
Special accessories (order as an extra)
seal #98996000 (see page 34)
Cleaning (see page 59)
Operation (see page 39)
- Hansgrohe recommends not to use as drinking water the first half liter of water drawn in the morning or after a prolonged period of non-use.
- Due to the design of the Bidette fittings, a small amount of water will leak at the outlet of the fitting when the hand shower is running.
Test certificate (see page 39)
Assembly (see page 33)
Assembly
Metris 31285000 / Metropol 32522000 / Metropol 74522000 / Finoris 76210XXX /
Finoris 76220XXX / Tecturis E 73210XXX / Tecturis S 110 73211XXX
Metris S
31160000 / Metris 31285000 / Focus 70 31926000 / Focus 100 31927000 /Talis S²
32140000 / Metropol 32522000 / Metropol 74522000 / Novus 70 71144000 / Rebris
S 110 72215XXX / Rebris E 110 72216000
Finoris 110 76210XXX / Finoris 260
76220XXX / Tecturis S 110 73211XXX
Tecturis E 110 73210XXX
Just clean: simply rub over the spray nozzles to remove lime
scale.
www.hansgrohe.com/cleaning-
recommendation
Hansgrohe
Auestraße 5 – 9
D-77761 Schiltach
Telefon +49 (0) 78 36/51-1282
Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com
Internet: www.hansgrohe.com