BOSS WL-T Wireless Transmitter Owner’s Manual
- June 4, 2024
- Boss
Table of Contents
WL-T Wireless Transmitter
Owner’s Manual
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT
NOTES.”
After reading, keep the document(s) where it will be available for immediate
reference.
For details on how to use the WL-T, refer to the owner’s manual of the
wireless system product that you’re using.
USING THE UNIT SAFELY
INSTRUCTIONS FOR THE PREVENTION OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
About WARNING and CAUTION Notices
About the Symbols
| Used for instructions intended to alert the user to the risk of death
or severe injury should the unit is used improperly.
---|---
| Used for instructions intended to alert the user to the risk of injury
or material damage should the unit be used improperly.
- Material damage refers to damage or other adverse effects caused with respect to the home and all its furnishings, as well as to domestic animals or pets.
| The symbol alerts the user to important instructions or warnings. The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger.
| The symbol alerts the user to items that must never be carried out (are forbidden). The specific thing that must not be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the unit must never be disassembled.
| The symbol alerts the user to things that must be carried out. The specific thing that must be done is indicated by the design contained within the circle. In the case of the symbol at left, it means that the power cord plug must be unplugged from the outlet.
ALWAYS OBSERVE THE FOLLOWING
WARNING
Do not disassemble or modify by yourself
Do not carry out anything unless you are instructed to do so in the owner’s
manual. Otherwise, you risk causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer, the nearest Roland Service Center, or an
authorized Roland distributor, as listed on the “Information.”
Do not use or store in the following types of locations
- **** Subject to temperature extremes (e.g., direct sunlight in an enclosed vehicle, near a heating duct, on top of heat-generating equipment); or are
- **** Damp (e.g., baths, washrooms, on wet floors); or are
- Exposed to steam or smoke, or are
- Subject to salt exposure, or are
- Exposed to rain, or are
- Dusty or sandy, or are
- Subject to high levels of vibration and shakiness, or are
- Placed in a poorly ventilated location
Avoid extended use at high volume
Use of the unit at high volume for extended periods of time may cause hearing
loss. If you ever experience any hearing loss or ringing in the ears, you
should immediately stop using the unit and consult a specialized physician.
Do not allow foreign objects or liquids to enter the unit; never place
containers with liquid on the unit
** Do not place containers containing liquid (e.g., flower vases) on this
product. Never allow foreign objects (e.g., flammable objects, coins, wires)
or liquids (e.g., water or juice) to enter this product. Doing so may cause
short circuits, faulty operation, or other malfunctions.
Turn off the unit if an abnormality or malfunction occurs**
Immediately turn the unit off, and request servicing by your retailer, the
nearest Roland Service Center, or an authorized Roland distributor, as listed
on the “Information” when:
- If smoke or unusual odor occurs; or
- Objects have fallen into, liquid has been spilled onto the unit; or
- The unit has been exposed to rain (or otherwise has become wet); or
- The unit does not appear to operate normally or exhibit a marked change in performance.
Be cautious to protect children from injury
Always make sure that an adult is on hand to provide supervision and guidance
when using the unit in places where children are present, or when a child will
be using the unit.
Do not drop or subject to strong impact
Otherwise, you risk causing damage or malfunction.
CAUTION
Route all power cords and cables in such a way as to prevent them from
getting entangled
The injury could result if someone were to trip on a cable and cause the unit
to fall or topple.
Avoid climbing on top of the unit, or placing heavy objects on it
Otherwise, you risk injury as the result of the unit toppling over or dropping
down.
Disconnect all cords/cables before moving the unit
Damage or malfunction may result if you fail to disconnect all cables before
moving the unit.
Handle leaking batteries carefully
- **** Do not touch the liquid with your bare hands.
- If any of the leaking fluid gets into your eyes, loss of vision may result. Do not rub your eyes; use clean water to flush them thoroughly. Then, promptly see a doctor.
- Burning of the skin or dermatitis may result if the fluid has gotten onto your skin or clothing. Use clean water to flush affected areas thoroughly; then, promptly see a doctor.
IMPORTANT NOTES
Placement
- Using the unit near power amplifiers (or other equipment containing large power transformers) may induce hum. To alleviate the problem, change the orientation of this unit; or move it farther away from the source of interference.
- This unit may interfere with radio and television reception. Do not use this unit in the vicinity of such receivers.
- Noise may be produced if wireless communications devices, such as cell phones, are operated in the vicinity of this unit. Such noise could occur when receiving or initiating a call, or while conversing. Should you experience such problems, you should relocate such wireless devices so they are at a greater distance from this unit, or switch them off.
- When moved from one location to another where the temperature and/or humidity are very different, water droplets (condensation) may form inside the unit. Damage or malfunction may result if you attempt to use the unit in this condition. Therefore, before using the unit, you must allow it to stand for several hours until the condensation has completely evaporated.
- Do not place containers or anything else containing liquid on top of this unit. Also, whenever any liquid has been spilled on the surface of this unit, be sure to promptly wipe it away using a soft, dry cloth.
Maintenance
- Never use benzine, thinners, alcohol, or solvents of any kind, to avoid the possibility of discoloration and/or deformation.
About the transmitter
- Do not use this device closer than 22 cm (8-11/16 inches) from where a cardiac pacemaker is implanted. Doing so may affect the operation of the cardiac pacemaker.
- The transmitter contains a lithium-ion battery. If you need to dispose of the transmitter, do not simply discard it with your household waste; if the internal lithium-ion battery becomes unusable, you should dispose of it in compliance with local regulations.
- Even if you do not use the transmitter for an extended period of time, you should charge it once every three months to prevent the internal lithium-ion battery from degrading.
- The ambient temperature range during charging is 5–35 °C
- However, in order to take full advantage of the rechargeable lithium-ion battery’s performance, we recommend that you charge it in a temperature range of 10–30 °C.
- If the temperature is outside the appropriate range, a charging error might occur (the BATTERY indicator blinks red) and the battery fails to charge.
Additional Precautions
- Do not use this unit in locations of extremely low or high temperatures. Operating temperature range: 5–40°C
- When disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will avoid causing shorts, or damage to the cable’s internal elements.
- To avoid disturbing others nearby, try to keep the unit’s volume at reasonable levels.
Caution Regarding Radio Frequency Emissions
- The following actions may subject you to a penalty of law.
- Disassembling or modifying this device.
- Removing the certification label affixed to the back of this device.
Licenses/Trademarks
- Roland and BOSS are either registered trademarks or trademarks of Roland Corporation in the United States and/or other countries.
- Company names and product names appearing in this document are registered trademarks or trademarks of their respective owners.
FEDERAL COMMUNICATIONS COMMISSION RADIOFREQUENCY INTERFERENCE STATEMENT
For the USA
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment requires shielded interface cables in order to meet the FCC
class B limit.
Any unauthorized changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
For Canada
CAN ICES-3 (B)/NMB-3 (B)
**For EU Countries
Manufacturer:
Roland Corporation
2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN
Importer:
** Roland Corporation ENA 23 Zone 1 nr. 1620 Klaus-Michael Kuehnelaan 13, 2440
Geel, BELGIUM
For the U.K.
Manufacturer:
Roland Corporation
2036-1 Nakagawa, Hosoe-cho, Kita-ku, Hamamatsu, Shizuoka 431-1304, JAPAN
Importer:
Roland Europe Group Limited
Hive 2, 1530 Arlington Business Park, Theale, Reading, Berkshire. RG7 4SA
United Kingdom
SUPPLIER’S DECLARATION OF CONFORMITY Compliance Information Statement
For the USA
Model Name : | WL-T(2) |
---|---|
Type of Equipment : | Wireless System |
Responsible Party : | Roland Corporation U.S. |
Address : | 5100 S. Eastern Avenue Los Angeles, CA 90040-2938 |
Telephone : | 323-890-3700 |
This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.
(FCC Part15 Subpart C §15.247,15.253, 15.255)
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment and meets the FCC radio frequency (RF) Exposure
Guidelines as this equipment has very low levels of RF energy.
(FCC Part15 Subpart C §15.247,15.253, 15.255)
For Canada
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IMPORTANT NOTE: Radiation Exposure Statement
The available scientific evidence does not show that any health problems are
associated with using low power wireless devices. There is no proof, however,
that these low power wireless devices are absolutely safe. Low power Wireless
devices emit low levels of radio frequency energy (RF) in the microwave range
while being used. Whereas high levels of RF can produce health effects (by
heating tissue), exposure of low-level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low-level RF
exposures have not found any biological effects. Some studies have suggested
that some biological effects might occur, but such findings have not been
confirmed by additional research. WL-T(2) has been tested and found to comply
with ISED radiation exposure limits set forth for an uncontrolled environment
and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.
European Community Declaration of Conformity
Hereby, Roland Corporation declares that the radio equipment type wireless
transmitter is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address.
The Declaration of Conformity may be consulted in the Downloads menu of this
product at the following internet address.
This unit has an RF transmitter(s) with the following specification.
5 Operating frequency: 2400–2483.5 MHz
5 Maximum RF transmit power: 8.1 mW
http://roland.cm/bossRED_DoC
Copyright (c) 2012 ARM LIMITED
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer* Redistributions in binary form must reproduce the above copyright notice, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.
- Neither the name of ARM nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Roland Service Centers and Distributors
When you need repair service, access this URL and find your nearest Roland
Service Center or authorized Roland distributor in your country.
For EU Countries
This symbol indicates that in EU countries, this product must be collected
separately from household waste, as defined in each region. Products bearing
this symbol must not be discarded together with household waste.
© 2020 Roland Corporation
Documents / Resources
| BOSS
WL-T Wireless
Transmitter
[pdf] Owner's Manual
WL-T Wireless Transmitter, WL-T, Wireless Transmitter, Transmitter, WL-T
Transmitter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>