MEEDEN ES-6056 Large Electric Height Adjustable Drafting Table Instruction Manual
- June 17, 2024
- MEEDEN
Table of Contents
MEEDEN ES-6056 Large Electric Height Adjustable Drafting Table
Two-Key Handset Operation
Panel
Initialization
Step | Action | Motion |
---|---|---|
1 | Hold both ∧&∨ simultaneously for more than 3 seconds | Legs begin to move |
down at half speed of normal operation
2| Keep holding ∧&∨| Legs move down to the lowest position and rebound 2-5 mm,
then stop
3| Release both ∧&∨| Initialization is completed
The initialization process must be completed before the first running after table is set up or gets parts replaced
Move up and down
Step | Operation | Motion |
---|---|---|
1 | Hold ∧ | The height moves up |
2 | Release ∧ | The height stops |
3 | Hold ∨ | The height moves down |
4 | Release ∨ | The height stops |
TroubleShooting
Fault Phenomenon | Handling |
---|---|
After connecting the power, press up or down, and the legs have no response. |
Re-initialize the table.
Check if the connection is correct.
After connecting the power, press and hold up & down together, the legs have
no response.| Check if the connection is correct.
The height is rising strangely slowly.| Check if the input power is correct.
The height doesn’t move by your control.| Please contact your supplier.
The height moves unevenly.| Check if the connection is correct.
The height can only move down but not up (and vice versa).| Re-initialize the
table.
The table slides down itself.| Check if the weight of the load on the table is
over 75 kg.
The table goes into initialization frequently.| Check if the weight of the
load on the table is over 75 kg.
Overview
Parts
Ⅰ | Ⅱ | Ⅲ |
---|---|---|
A | 1 | |
B | 8 | |
C | 10 | |
D | 8 | |
E | ![Parts ](https://manuals.plus/wp-content/uploads/2024/02/MEEDEN-ES-6056 | |
-Large-Electric-Height-Adjustable-Drafting-Table-Instruction-Manual-10.png) | 3 | |
F | 8 | |
G | 1 | |
H | 1 |
Assembly instruction
All exposed screw holes needs to be covered by the Part C
After all connector is setup, connect power supply
CUSTOMER SUPPORT
MEEDEN Product Warranty
Thank you for choosing MEEDEN products.
This warranty is to the original purchaser from authorized dealers only.
Warranty is not transferable.
Meeden Limited Lifetime Warranty:
Meeden will replace any part from any Meeden Easel or Desk that proves
defective with normal use within the lifetime of the original owner.
What does this limited warranty not cover?
This Limited Warranty does not cover any problem that is caused by:conditions,
malfunctions or damage not resulting from defects in material or workmanship
What do you have to do?
To obtain warranty service, you must first contact us to determine the problem
and the most appropriate solution for you.
Email: customer-service@meeden-art.com
MEEDEN IS FOR ART.
MEEDEN ART SUPPLY CO., LTD.
Find Us: https://meedenart.com/
Customer Service: help@meeden-art.com
meeden.art
meedenarts
meedenart
meedencreate
References
- Art.com | Wall Art: Framed Prints, Canvas Paintings, Posters & More!
- Art Supplies: Easels, Paints, Brushes, Storage, Art Sets-MEEDEN ART