LuxenHome WHAP1789 Set of 3 Snow-Flocked Christmas Trees with Metal Pots Instruction Manual
- June 13, 2024
- LuxenHome
Table of Contents
**LuxenHome WHAP1789 Set of 3 Snow-Flocked Christmas Trees with Metal Pots Instruction Manual
**
| Product Name: | Set of 3 Snow-Flocked Christmas Trees with Metal Pots |
|---|---|
| SKU #: | WHAP1789 |
Thank you for purchasing this LuxenHöme product. This product has been
manufactured with the highest standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from inside the carton to ensure there are no missing or
damaged parts. If any parts are missing or damaged, do not attempt to assemble
or use the product.
CARTON CONTENTS
| Description | Quantity |
|---|---|
| Small Tree | 1 |
| Medium Tree | 1 |
| Large Tree | 1 |
| Metal Pots | 3 |
Before You Start
-
Decide on an appropriate location for your product, please read assembly and Instruction procedure carefully.
Note: These trees are for indoor display only. -
Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure (no tools required for assembly):
Remove all packaging (i.e., cardboard or plastic) before beginning. We suggest
unpacking the trees on a large cloth. Some of the snow flocking may come off
during unpacking and fluffing of branches.
- Place the pots on a level surface before assembling. Insert the tree body into the pot firmly.
- Gently lower all branch tips on tree. Take care not to place unnecessary pressure on the brackets during assembly.
- The branches can be adjusted to give your tree a certain fullness. For the best results, straighten and separate all branch tips, then bend them slightly upward.
Tip: start with tips closest to the pole. One tip to the right, one to the left, and one at the center of the main stem. Repeat pattern for each branch.
Warnings:
- Risk of Fire and Electric Shock – please follow instructions and warnings on string lights if adding lights to trees.
- Do not place it near fireplaces, candles, outdoor heaters, or other similar sources of heat. The trees are not flame retardant.
- Do not install near pools, fountains, tubs, sinks, or other areas of standing water that the tree may fall or blow into.
- Make sure the final assembly stable enough to hold the tree upright.
- This product is for decoration use only. Not to be used by children as a toy. Keep out of reach of small children.
Troubleshooting
- Tree is not straight: Make sure the tree is firmly inserted into the pot. It is better if the tree is in the vertical position when adjusting.
Note: If this does not resolve the issue with the trees, please do not disassemble the trees yet. Please contact customer service for assistance.
Storage
- Remove all decorations.
- Remove each from its pot. Press the tree tips back up against the pole.
- Place the trees back into the carton, putting the largest one on the bottom.
- Store the product in a cool, dry location protected from sunlight where the temperature does not exceed 35˚C (95˚F).
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>