Shuttle DS20U Series Fanless Slim PC User Manual

Shuttle DS20U Series Fanless Slim PC

Copyright
©2022 by Shuttle® Inc. All Rights Reserved.
No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means such as electronic, mechanical, magnetic, optical, chemical, photocopy, manual, or otherwise, without prior written permission from Shuttle® Inc.
Other brands and product names used herein are for identification purposes only and may be trademarks of their respective owners.

Disclaimer
Shuttle® Inc. shall not be liable for any incidental or consequential damages resulting from the performance or use of this product.
Shuttle® Inc. makes no representation or warranty regarding the contents of this manual. Information in this manual had been carefully checked for accuracy;however, no guarantee is given as to the correctness of the contents. For continuing product improvement, Shuttle® Inc. reserves the right to revise the manual or make changes to the specifications of this product at any time without notice and obligation to any person or entity regarding such change. The information contained in this manual is provided for general use by customers.

This device complies to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must withstand any background interference including those that may cause undesired operation.

Trademarks

Shuttle is a registered trademark of Shuttle Inc.
Intel and Pentium are registered trademarks of Intel Corporation.
PS/2 is a registered trademark of IBM Corporation.
AWARD is a registered trademark of Award Software Inc.
Microsoft and Windows are registered trademarks of Microsoft Corporation.

General Notice
Other brand and product names used herein are for identification purposes only and may be trademarks of their respective owners.

Safety Information

Read the following precautions before setting up a Shuttle XPC.

CAUTION
Incorrectly replacing the battery may damage this computer. Replace only with the same or equivalent as recommended by Shuttle. Disposal of used batteries according to the manufacturer’s instructions.

Installation Notices

Do not place this device underneath heavy loads or in an unstable position.
Do not expose this device to high levels of direct sunlight, high humidity or wet conditions.
Do not use or expose this device around magnetic fields as magnetic interference may affect the performance of the device.
Do not block the air vents to this device or impede the airflow in any way.

Driver and Software Installation

Motherboard Driver DVD

The DVD contents attached in DS20U Series motherboard are subject to change without notice.

The Motherboard Driver DVD contains all the motherboard drivers necessary to optimize the performance of this Shuttle Xvision in a Windows® OS. Install these
drivers after installing Microsoft® Windows®.
Insert the attached DVD into your DVD-ROM drive. The DVD AutoRun screen should appear. If the AutoRun screen does not appear, double click on Autorun icon in My Computer to bring up Shuttle Mainboard Software Setup screen.
Navigation Bar Description:

• Auto Install Driver.
• Install Intel Rapid Storage Tech. Driver.
• User Manuals – Motherboard Manual, Quick Guide.
• Link To Shuttle Website – Link to shuttle website homepage.
• Browse This DVD – Allows you to see contents of this DVD.

User Manuals

• Install Adobe Reader 9.5
• MotherBoard Manual
• Quick Guide

Appendix

Starting BIOS
AMIBIOS has been integrated into many motherboards for over a decade. In the past, people often referred to the AMIBIOS setup menu as BIOS, BIOS setup, or CMOS setup.
American Megatrends refers to this setup as BIOS. Specifically, it is the name of the AMIBIOS8 BIOS setup utility. This chapter describes the basic navigation of the BIOS setup screens.

Enter the BIOS
To enter the BIOS setup screens, follow the steps below:

Step1. Power on the motherboard.

Step2. Press the key on your keyboard when you see the following text prompt: Press DEL to run Setup.

Step3. After you press the key, the main BIOS setup menu displays.
You can access the other setup screens from the main BIOS setup menu, such as the Chipset and Power menus.

This manual describes the standard look of the BIOS setup screen.
The motherboard manufacturer has the ability to change any and all of the settings described in this manual. This means that some of the options described in this manual do not exist in your motherboard’s AMIBIOS.
In most cases, the key is used to invoke the BIOS setup screen. There are a few cases that other keys are used, such as ,, and so on.

BIOS Setup Menu
The main BIOS setup menu is the first screen that you can navigate. Each main BIOS setup menu option is described in this user’s guide.
The Main BIOS setup menu screen has two main frames. The left frame displays all the options that can be configured. “Grayed-out” options cannot be configured. Options is blue can be.

The right frame displays the key legend. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white.
Often a text message will accompany it.

AMIBIOS8 has default text messages built into it. The motherboard manufacturer retains the option to include, leave out, or change any of these text messages. They can also add their own text messages. Because of this, many screenshots in this manual are different from your BIOS setup screen.

The BIOS setup/utility uses a key-based navigation system called hotkeys. Most of the BIOS setup utility hotkeys can be used at any time during the setup navigation process. These keys include , , , , keys, and so on.

There is a hotkey legend located in the right frame on most BIOS setup screens.

→ Left

← Right

| The Left and Right keys allow you to select a BIOS setup screen. For example: Main screen, Advanced screen, Chipset screen, and so on.
↑ Up

↓ Down

| The Up and Down keys allow you to select an BIOS setup item or sub- screen.
+- Plus/Minus| The Plus and Minus keys allow you to change the field value of a particular setup item. For example: Date and Time.
Tab| The key allows you to select BIOS setup fields.
F1| The key allows you to display the General Help screen.

Press the key to open the General Help screen.

F4

| The key allows you to save any changes you have made and exit BIOS Setup. Press the key to save your changes. Press the key to save the configuration and exit. You can also use the key to select Cancel and then press the key to abort this function and return to the previous screen.

ESC

| The key allows you to discard any changes you have made and exit the BIOS Setup. Press the key to exit the BIOS setup without saving your changes. Press the key to discard changes and exit. You can also use the key to select Cancel and then press the key to abort this function and return to the previous screen.

Enter

| The key allows you to display or change the setup option listed for a particular setup item. The key can also allow you to display the setup sub-

screens.

Main Setup

When you first enter the BIOS Setup Utility, you will enter the Main setup screen.

You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below.

System Time/System Date
Use this option to change the system time and date. Highlight System Time or System Date using the keys. Enter new values through the keyboard. Press the key or the keys to move between fields. The date must be entered in MM/DD/YY format. The time is entered in HH:MM:SS format.

The time is in 24-hour format. For example, 5:30 A.M. appears as 05:30:00, and 5:30 P.M. as 17:30:00.

Advanced

Select the Advanced tab from the BIOS setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item.
You can display an Advanced BIOS Setup option by highlighting it using the