Panasonic N-U168U Dryer Stand Instruction Manual

Installation Instructions
Dryer Stand N-U168U

N-U168U Dryer Stand

For Hong Kong:
Shun Hing Electronic Trading Co., Ltd.
Customer Service Hotline : 2833 0955
For Taiwan:
Panasonic Taiwan Co., Ltd. (contractor)
Voice Of Customer Center Hotline : 0800-098800
Read these instructions carefully before assembling and installing the product according to the instructions.
Be sure to tighten all screws to avoid any hazards.

Parts Names

Quantity: A set of dryer stand
Net Weight: 12.1 kg
Material: Steel Plate (SPCC)
Plastic (ABS, PP)

Accessories (inside plastic bag)

Dimensions Diagram

Compatible washers/dryers for this dryer stand:

• Dryer: compatible dryer models.

• Washer: Maximum dimensions for washers: W660 x D773 x H1412 mm

• For other brands, please confirm compatibility based on dimensions.

• Compatible dryers come with fixed clips for installation, please refer to the simplified installation instructions for the dryer and dryer stand.

Assembly Procedure

1. Open the Pillar
   Open the pillar to both sides. (During packaging, the height of the left and right brackets may differ, which is normal.)

2. Adjust Height
   First, remove the four screws that secure the bracket to the pillar. According to the model of washer you purchased, adjust the bracket to the appropriate height (seven-level height adjustment). Next, fix the left and right sides with a screw in the lower fixing hole, respectively.

3. Secure Horizontal Bracket
   Secure the horizontal bracket to the upper fixing hole.

4. Install Front Bracket
   Insert the front bracket firmly into the upper bracket tube.

5. Secure Positioning Plate
   After aligning the holes on the positioning plate with the pillar at the back of the product, use the included positioning plate screws (4 pieces) to secure it in place.

6. Secure Rear Bracket
   Secure the rear bracket to the upper bracket plate using the included rear bracket screws (2 pieces).

Installation Settings

1. Placement
Place it on a sturdy, horizontal surface.
To prevent it from tipping backwards, it must be placed against a wall.
Do not place it next to the railings of a balcony to avoid the risk of it being blown over by strong winds. 2. Stability Adjustment
The dryer stand must be stable when placed, with no wobbling.
If the product is unstable, you can use the adjustable foot to adjust it to be stable. 3. Installing the Chain

• For safety reasons, a chain must be installed.
• The chain must be secured to a hook on the rear wall and must not be slack.

The hook used to secure the chain must be fixed to a sturdy wall or column.

4. Dryer Combination Setup

• Place the dryer on the dryer stand and align it with the assembly holes on the upper bracket plate and the holes on the bottom of the dryer. Use the included screws (4 pieces) and washers (4 pieces) to set up the dryer and secure it in place.

While setting up, be sure to align the holes on the front side, and also ensure the holes on the back side re aligned before securing them.

Panasonic Taiwan Co.,Ltd. (contractor)
579 Yuan-Shan Road, Chung-Ho District, New Taipei Cit y
Made in Taiwan
AWH9012H26H0-0H0

Documents / Resources

| Panasonic N-U168U Dryer Stand [pdf] Instruction Manual
N-U168U, N-U168U Dryer Stand, N-U168U, Dryer Stand, Stand
---|---

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>