HANDHELD 30400300377 E1000 Label Maker Instruction Manual

Please read this user manual carefully before using this product, and store it for future reference.

Contents Checklist

The quantity of included label tape is subject to the actual delivery

Specification

E1000 Pro

Tape width and maximum number of print lines| 3.5/6mm: 1 Line 9mm: 3 Lines
12mm: 4 Lines
Max Print Width| 9mm on 12mm tape
Print Technology| Thermal Transfer
Print Resolution| 180180dpi
Print Speed| 20mm/s
Cutting Method| Manual cutting
Automatically turns off after| 5 minutes
Automatic memory function| Support
Ribbon tightening function| Support
Consumables identification function| Manual selection
Power supply| Power Adapter or 6MA batteries
Item Size| 213mm116.5mm61.5mm /8.44.6*2.5in
Font Style| Normal, Bold, Italic
Width| Normal, X 2, X 1/2
Frame| Support
Label Length| The label length for each
label depends on the label content, which is up to 800mm
Margin| Full: Equal margins on both sides are 25mm
Half: Equal margins on both sides are 12mm
Narrow: Equal margins on both sides are 4mm
Mirror Mode| Support

Parts Description

1·Power Key
2. Font Size
3. Faceplate Key
4. Cable Wrap Key
5. Cable Flag Key
6. Multiple Labels Editing Key
7. Print Key| 8. Enter Key
9. Mirror Mode Key
10. Delete all Key
11. Cursor Key
12. OK Key
13. Accents Key
14. Menu Key
15. Backspace Key| 16. Shift Key
17. Caps Key
18. Font orientation Key
19. Symbol Key
20. Space Key
---|---|---

Turning on the Power

Method I: Power on with the adapter
Method II: Power on with AAA alkaline battery

Installation for Label Tape

1. Take out the label tape and remove the blue card

2. Make sure the end of tape passes through both tape guide CD and 2, then extend the end of the tape by about 1.18 inch (3cm) from tape guide 2.
   

3. Turn the toothed wheel in the direction of the arrow on the label tape until tight to avoid damage.
   

4. Install the label tape correctly as indicated, and make sure that the extended tape comes out through the tape exit slot of label maker.
   

Common Functions

6.1 Language

6.2 Select label width

1. When using the label maker for the first time, insta the label tape and select the label with. use the navigation eyS to select the label width

2. Whenever you replace the label tape during use you need to re-select the label width
   

6.3 Text format

1. Font Size

2. Font Style
   

3. Width

4. Punctuation
   

5. Frame

6. Switching Upper Case/Lower Case

7. Setting Margins

Margin function sets equal margins on both sides of the text

Note

1. After setting [Half] and [Narrow], the display shows the label length from the printed dots (:) to the end of the label
2. In order to save label tape, set the margin to [Narrow]

(8) Entering multiple lines of text
a. 12mm wide label tape: Support print 4 lines of text, After entering the 4th line of text, do not press the [Enter] key, otherwise the error message “Please reduce the number of lines!” will be displayed.

6.10 Other printing types

1. Cable Wrap You can create a label that can be wrapped around a cable or wire. The input text line is rotated 90°counter clockwise and printed on a label whose length is automatically determined by setting the cable diameter

Cleaning Guide for Label Maker

Use a cotton swab dipped in a small amount of alcohol, and wipe the print head gently

1. The print head needs to be cleaned when printing is not clear.
2. Make sure the power is turned off and the power cord is unplugged before cleaning the print head
3. Wait until the alcohol evaporates and the print head is dry, then turn on the label maker to print and check the resulting print
4. Do not scratch the print head with a hard object, otherwise the print head will be damaged and the printing effect may be compromised.

Replacing the Cutter Holder

If the label tape cannot be cut neatly after continuous use, please replace the cutter holder as shown in the following diagram.

https://downloadapp.qu-in.life/instruction/D1000/

If you need user manual in other languages, please scan the QR code.

Troubleshooting

them with new ones
Invalid!| An invalid number was entered as the label length, cable diameter or faceplate length| Correct entry
Text Limit!| The number of entered characters exceeds the label length| Reduce the text or select [Auto] as the label length
No Data!| 1. An attempt was made to print a label file when no data was stored in the memory.
2. [Print key],[Enter key],[0K key], [Preview]was pressed when no text was entered.| Press [BS(Backspace)Key] to return to the edit page and enter text
Line Limit!| 1. 12m:An attempt was made to enter a 4th line by pressing [Enter key] ;
2. 9mm:An attempt was made to enter a 3th line by pressing [Enter key] ;
3. 6mm:An attempt was made to enter a ith line by pressing [Enter key] ;| Reduce lines
Text Full!| The maximum number of characters (80 characters for regular text) was already entered. Reduce numbers of characters to a maximum of 80| Reduce entry (reduce bytes please!)
Cutter Error!| The cutter lever was used during the printing process| Press [Print Key] and DO NOT TOUCH the cutter lever while printing
No Cassette!| There is no cassette in the label maker| 1. Input a cassette
2. Cover the back of the device.

Additional Troubleshooting

batteries are correctly inserted.
2. If the batteries are weak, replace them.
3. If using the power adapter, make sure the cord is connected correctly and power is turned on
When the label is printed out, the margin (space) is too large on both sides of the text| See “Setting Margin” in this user manual and select [Half] or [Narrow] to have smaller margins for labels.
The printer does not print, or the printed characters are not formed correctly| 1. Check that the tape cassette has been inserted correctly
2. If the tape cassette is empty, replace it.
3. Check that the cassette cover is fully closed.
A blank horizontal line appears through the printed label| There may be some dust on the printer head. Remove the tape cassette and use a dry cotton swab to gently wipe the printer head with an up-and-down motion. Or insert a print head cleaning cassette to clean the printer head more easily
The printer has “frozen up” (i.e. nothing happens when a key is pressed, even though the printer is on)| C) Replace batteries in case the batteries are weak
C) Restart the printer by pressing the Power key
C) If the two solutions above do not work, return to your seller
The power turns off when trying to print| ® The batteries may be weak. Replace them.
C) Check that the batteries are correctly inserted.
The tape does not feed correctly or the tape gets stuck inside the machine| ® Check that the end of the tape feeds under the tape guides
C) The cutter lever has been used while printing. DO NOT TOUCH the cutter lever during printing

Product Warranty Descriptio

Product after-sales service is strictly based on the consumer protection law of the People’s Republic of China and the Product Quality law of the People’s Republic of China.
Services are as below

1. The free warranty period is 1 year from the date of purchase (according to the date of the official purchase invoice.

2. Within-days from the date of the purchase receipt, the user can choose to return, replace or get free repair service.
   Within—days from the date of receipt, the user can choose to replace or repair the product. Service is free of charge.

3. Free repair service does not include insurance, postage, shipping and other fees, nor does it include door-to-door service.

Non-warranty regulations are as follows
The warranty is void under the following conditions:

• Exceeding the warranty period
• Not presenting the original purchase invoice and the original warranty/maintenance card together, or the warranty card does not match the invoice information.
• Presenting a damaged warranty/maintenance card(e.g. torn or tampered with).
• Altering product information.
• Damage caused by unauthorized repair, disassembling. etc.
• Damage caused by human error.
• Damage caused by natural disasters such as earthquakes, floods, windstorm, lighting strikes, or external disasters such as fires and house collapse.
• Failure or damage caused by harsh conditions (oil, dust, moisture, direct sunlight, etc.) or failure to use or care for the product as written in the instruction manual

Please safekeep the warranty/maintenance card properly. The warranty/maintenance card will not be replaced if lost.
Product warranty description takes effect with warranty/maintenance card properly filled in.

Warranty/Maintenance Card

• Replace
• Return

User Information| Name: Gender:
Phone:
---|---
Address:
Product Information| Date of purchase:
Product order number:
Product serial number:
Reason for Return ( Replace/Repair /Request Maintenance )| Problem description:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>