FENTON RP173 Record Player Vintage Instruction Manual

: June 6, 2024
: FENTON

Table of Contents

FENTON RP173 Record Player Vintage
OVERVIEW
TURNTABLE OPERATION
RADIO OPERATION
BT CONNECTION
RCA OUTPUT MODE
CONNECTING WITH COMPUTER
- To Install Software (PC)
- To Install Software (MAC)
SOFTWARE CONFIGURATION
TECHNICAL SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FENTON RP173 Record Player Vintage

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock. Keep the manual for future reference.

Prior to using the unit, please ask advice from a specialist. When the unit is switched on for the first time, some smell may occur. This is normal and will disappear after a while.
The unit contains voltage carrying parts. Therefore do NOT open the housing.
Do not place metal objects or pour liquids into the unit This may cause electrical shock and malfunction.
Do not place the unit near heat sources such as radiators, etc. Do not place the unit on a vibrating surface. Do not cover the ventilation holes.
The unit is not suitable for continuous use.
Be careful with the mains lead and do not damage it. A faulty or damaged mains lead can cause electrical shock and malfunction.
When unplugging the unit from a mains outlet, always pull the plug, never the lead.
Do not plug or unplug the unit with wet hands.
If the plug and/or the mains lead are damaged, they need to be replaced by a qualified technician.
If the unit is damaged to such an extent that internal parts are visible, do NOT plug the unit into a mains outlet and DO NOT switch the unit on. Contact your dealer. Do NOT connect the unit to a rheostat or dimmer.
To avoid fire and shock hazard, do not expose the unit to rain and moisture.
All repairs should be carried out by a qualified technician only.
Connect the unit to an earthed mains outlet (220-240Vac/50Hz) protected by a 10-16A fuse.
During a thunderstorm or if the unit will not be used for a longer period of time, unplug it from the mains. The rule is: Unplug it from the mains when not in use.
If the unit has not been used for a longer period of time, condensation may occur. Let the unit reach room temperature before you switch it on. Never use the unit in humid rooms or outdoors.
To prevent accidents in companies, you must follow the applicable guide lines and follow the instructions.
Do not repeatedly switch the fixture on and off. This shortens the life time.
Keep the unit out of the reach of children. Do not leave the unit unattended.
Do not use cleaning sprays to clean switches. The residues of these sprays cause deposits of dust and grease. In case of malfunction, always seek advice from a specialist.
Do not force the controls.
This unit is with speaker inside which can cause magnetic field. Keep this unit at least 60cm away from computer or TV.
If this unit have a built-in lead-acid rechargeable battery. Please recharge the battery every 3 months if you are not going to use the unit for a long period of time. Or the battery may be damaged.
If the battery is damaged please replace with same specifications battery. And dispose the damaged battery environment friendly.
If the unit has fallen, always have it checked by a qualified technician before you switch the unit on again.
Do not use chemicals to clean the unit. They damage the varnish. Only clean the unit with a dry cloth.
Keep away from electronic equipment that may cause interference.
Only use original spares for repairs, otherwise serious damage and/or dangerous radiation may occur.
Switch the unit off prior to unplugging it from the mains and/or other equipment. Unplug all leads and cables prior to moving the unit.
Make sure that the mains lead cannot be damaged when people walk on it. Check the mains lead before every use for damages and faults!
The mains voltage is 220-240Vac/50Hz. Check if power outlet match. If you travel, make sure that the mains voltage of the country is suitable for this unit.
Keep the original packing material so that you can transport the unit in safe conditions.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and 35°C/95°F.

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings contained in this manual. Fenton cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and warnings. This is also applicable to all damages in whatever form.

OVERVIEW

Function Knob
Knob to select FM- phono- or BT-mode.
BT LED
Power/volume Knob
Turn the knob to turn on/off- and set the volume of the turntable.
Dial Knob
Platter
Place your record here.
Lift Lever
Operate to lower or raise the tone-arm.
Tone Arm Clip
This specially designed arm clip secures the tone arm while at rest or when not in use. The arm clip has been designed to remain in the up position while unlocked.
Autostop Switch ON/OFF
This switch turns auto stop on or off. When the automatic stop is enabled, the platform will start rotating as soon as the tone arm is placed over the record and will stop rotating when it has reached the end of the record. Some vinyl records stop before the end or do not stop when the end is reached. In this case set Auto-stop to OFF.
33 / 45 / 78 RPM Switch
This switch controls the RPM of the turntable platter.
Spindle
Tone arm
Cartridge with Needle
When the turntable is not in use, it is recommendable to place the removable protection cover over the stylus.
FM Antenna
RCA Line output
The audio from a playing vinyl record is sent to this line-level coaxial audio output. This must not be connected to phono level devices.
USB Port
Use a USB cable to connect your turntable to your computer. The USB connection will send audio from the turntable to your computer.
DC IN port
Connecting the 12Volt/DC power adapter.

Overview 03

TURNTABLE OPERATION

Connect the record player with the power adapter and plug the other end into a wall power outlet.
Turn the power & volume control knob clockwise to turn on the record player.
Remove the protective needle cover.
Select phono mode by turning the function knob to PH.
Place a vinyl record on the turntable platter and select the desired speed (33/45/78RPM) according to the record. When playing a 45RPM record, use the provided 45RPM adapter.
Open the tone arm clip to release the tone arm. Push the lift lever backwards to raise the tone arm and gently move the tone arm to the desired position over the record. The turntable will begin to spin when the tonearm is moved toward the record(when the AUTO STOP switch is ON). Push the lift lever forwards to lower the tone arm slowly onto the desired position on the record to start playback.
Turn the volume control knob to adjust the volume.

Noted: If the AUTO STOP ON/OFF Switch is turned ON, the record will stop automatically when finished. If Auto Stop Control is turned OFF, record will NOT stop automatically when finished.

RADIO OPERATION

Select radio mode by turning the function knob to FM.
Turn the radio dial knob to tune in to the station you want to listen to (88-108MHz).
Turn the volume control knob to adjust the volume.

NOTE: The receiver has a build-in FM pigtail antenna on the back of the unit. This should be unraveled for best reception.

BT CONNECTION

Select BT mode by turning the function knob to BT. The BT LED indicator will flash in blue color.
Turn on your external BT device to pair with the unit. Go to your device’s BT menu and select “Fenton recordplayer” to connect the unit. Once connected, the blue LED light will stop flashing.
To select the volume level, either turn the volume control knob to adjust the volume or adjust from your BT connected device.

RCA OUTPUT MODE

Connect your own speaker system to the RCA port of the record player with an RCA-3.5mm audio cable (not included). NOTE: the RCA cables are color coded. The red plug cable must be plugged into the red connector on both the record player and external amplifier or speaker system. The white plug cable must be plugged into the white connector on both the record player and external amplifier or speaker system.

CONNECTING WITH COMPUTER

Before you connect the turntable to a computer, unplug it from your mixer or Hi-Fi system. The included software is a third party application and therefore Fenton does not handle any questions or problems regarding the software.

Turn the computer on
If the computer is booted, connect the turntable. The computer will now install the drivers.
After the drivers are installed, you must now install the Audacity software.

Windows users: insert the CD or download the newest software via http://audacity.sourceforge.net MAC users: download the newest software via http://audacity.sourceforge.net

To Install Software (PC)

Plug in your turntable to an power supply and connect the USB port on the Turntable to the USB port of your computer.
Turn on the power switch to your turntable.
The Windows system will detect a new device and indicate that it is available to use.
Insert the CD that came with your USB turntable.
Run the file to install the Audacity software. Once installed, run the Audacity program.

To Install Software (MAC)

Insert the included CD.
Open the CD icon on the desktop.
Drag the installation folder for audacity to your hard drive. We recommend that you move the folder to your “Applications” folder.
A window will come up which shows the files copying.
EJECT the CD.
Open “Audacity” from where you moved it to on your hard drive.

SOFTWARE CONFIGURATION

Click on Microphone in the drop down menu and select “Stereo Mix”.
Select the “Edit” menu and then “Preferences”
Select the USB audio device under the “Recording” selection as shown. Select “Software Playthrough” to hear the audio while recording.
After the above settings are completed, you are ready for recording. If you are still having difficulties in finding the USB Turntable, try to check your system settings or control panel to adjust the audio input settings from the sound control panel.

Note: The attached Audacity software is for reference only. For more information and latest software version, please check the website: http://www.audacity.com

TECHNICAL SPECIFICATION

Output Connections: RCA
Speed Settings (RPM): 33, 45, 78
Power Supply: 100-240VAC 50/60Hz (12V Adapter)
Dimensions (L x W x H): 370 x 470 x 260mm
Weight: 8,30 kg

The specifications are typical. The actual values can slightly change from one unit to the other. Specifications can be changed without prior notice.
The products referred to in this manual conform to the European Community Directives to which they are subject: