handheld ALGIZ 10XR Rugged Tablet User Manual

handheld ALGIZ 10XR Rugged Tablet User Manual

What’s in the Box

Specification

ALGIZ 10XR is a rugged tablet PC designed for use in various challenging environments, e.g., field work, outdoor activities and construction sites. With its rugged design, ALGIZ 10XR is able to withstand shocks, vibrations, high humidity as well as high/ low temperatures.

System

Processor| Intel Atom® x6413E Quad Core 1.5 GHz Processor
BIOS| AMI System BIOS
Chipset| Intel ATOM Soc Integrated
Memory| SO-DIMM DDR4 2666 8G
Storage| SATA interface, M.2-2242 SATA3, 128GB SSD module with possibility to upgrade to 256GB/512GB Max.
Audio| Microphone-in. Internal Speaker
Display Specification

Size| 10.1” (16:10)
Resolution| 1920 x 1200
Brightness| 850 cd/m2 (typ.)
Touch| 10 points projective capacitive touch
Buttons and Indicators

Control Button| Power On/Off, Touch Mode/Lock, Menu, Windows key, two programmable hotkeys
LED Indicators| Power Status, SSD Status, Battery Status

Boot Options

Factory Reset
The ALGIZ 10XR has a builtfactory state. Press F1 during booting when BIOS logo screen appears. Follow the instructions on the screen to continue with the factory reset.

  CAUTION: This procedure will erase all data on your disk.

Front Side

brightness. The feature can be enabled throughthe OSD Control Keypad.
7 & 8| Speaker| Front Speaker
9| NFC reader| NFC reader
10| Front camera| Front camera
11| Microphone| Voice input.

LED Indicators

indicators are off in Hot Tab
Storage Status| **| Flashing blue light: SSD is reading/writing data
Battery Status| **| Green: Full battery, 100 %
Red: Low battery, 10 %
Orange: Charging Flashing
red: Running on Hot-swap battery

Rear Side

modulel   RS232 modulel   CAN BUS modulel   RJ45 ethernet module

Bottom Side

Before turning the unit on, make sure that the tablet is either connected to AC Adapter or Battery Pack.

AC Adapter

The ALGIZ 10XR power supply comprises the power adapter and the battery pack. The power adapter converts AC power from a wall outlet to the DC power required by the ALGIZ 10XR. Your ALGIZ 10XR comes with a universal AC-DC adapter. That means that you may connect the power cord to any 100V -120Vas well as 220V-240V outlets without using power converters. Different countries may require an adapter to be used to connect the supplied standard AC power cord to a different standard.

Battery Pack

The ALGIZ 10XR is designed to work with two types of battery. A standard battery with 3640mAh and an extended battery with double the capacity. The battery life especially depends on the battery’s condition, tablet usage, as well as the temperature.

The power rating and manufacturer information are listed as below. For safety reason, the adapter power cord must be connected to safety ground.

Power Adapter| Manufacturer: FSP TECHNOLOGY INC. Model: FSP065-RBBN3

Input Rated: 100-240Vac, 3.42A, 50-60Hz. Output Rated: DC 19V, 3.42A.

---|---
Battery Pack| Manufacturer: ATEMITECH CORPORATION Model: ALG10XR-1004

Rated: 3520mAh DC 11.55V

CAUTION: Do not attempt to fix orreplace the battery, as this maycause an explosion! Only use the specified battery and follow the instructions in the manufacturer.

Insertion of the Battery Pack

Removal of the Battery Pack

Chargingthe Battery

When the power adapter is plugged in, the battery automatically recharges regardless of whether your tablet PC is in the ON or OFF mode. It takes a couple of hours for the battery to be fully charged when the power is OFF and twice as long when the tablet PC is in use. When Tablet battery is low capacity and charging needed, the Red indicator is on. During charging process, the Orange indicator is on. When the battery is fully charged, the Green indicator is on.

CAUTION: If unit is kept in storage forlonger periods of time (6 months without itbeing used),the hot-swap battery might discharge to very low capacity, meaning its function no longer expected as normal.

Prior to hot-swap battery,please make sure tablet connected to AC adapter for one hour and charging full.

Installing SIM Card, Micro SD Card
Remove the battery on the rear side, SIM socket and Micro SD socket resident in the battery room. Insert the SIM card and Micro SD card, according to the pictures below.

Starting ALGIZ10XR
Press the power button for a while to power on the ALGIZ 10XR. Follow the Microsoft Windows on-screen instructions to get started with Windows.

Hot-Tab

ALGIZ 10XR comes pre-installed with the control program Hot-Tab that can be used to monitor and control features and multiple connected devices such as screen brightness, screen orientation, battery status, Bluetooth,
GPS, etc. You can press the menu button on the ALGIZ 10XR panel to open the program, and the interface will appear on the right side of the screen.

Closing the Hot-Tab interface: To close the Hot-Tab interface, click anywhere outside the Hot-Tab area.

Auto-rotation

You can choose to turn on the auto-rotate screen mode. Click the icon to enter the sub page.

Click the icon to switch between automatic and manual rotate modes. In auto- rotate mode, the screen automatically rotates depending on the device’s orientation. To select the manual-rotate mode, please use the right button to complete the setting.

Devices
Shortcut keys are available to turn on and off the following:

1. Bluetooth
2. GPS
3. WLAN
4. WWAN (5G/LTE) (supported, but not required)

Click the icon to open the sub-page.

Bluetooth

ALGIZ 10XR has Bluetooth connectivity. Turn it on to establish connection with your Bluetooth devices.
Click the icon to turn Bluetooth on or off.

GPS

ALGIZ 10XR has a GPS unit. Click the icon to set the GPS on or off.
After the GPS is turned on, it begins to search for satellite data to calculate its position. The calculation may take seconds to several minutes depending on factors such as the strength of the satellite signal and the noise density in the environment.

WLAN

ALGIZ 10XR supports IEEE 802.11 ac/a/b/g/n and 2.4GHz/5GHz WiFi connection.
Click the icon to turn on or off the WiFi function.

WWAN (3G/4G/5G) -Optional

ALGIZ 10XR optionally supports WWAN (5G/LTE) connection. If a WWAN modem is installed, click the  icon to turn on or off the WWAN function.
Reminder: Before connecting to a WWAN network, insert a suitable SIM card in the ALGIZ 10XR.

Battery Status

Click the icon to display the status of the primary and secondary batteries.
The ALGIZ 10XR is equipped with a spare secondary battery, which can be replaced without shutting down

Key strobe
Click the icon to open the Key strobe page.

The ALGIZ 10XR panel provides two user-defined function keys. Users can set the physical keys of the panel to any one of F1 to F12 according to their needs.

Adjusting the LCD Brightness

There are two LCD brightness adjusting modes: automatic dimming mode and manual dimming mode. Click the button to enter the sub page.

Click the icon to switch between automatic dimming mode and manual dimming mode. In automatic dimming mode, the LCD will automatically adjust the brightness of the screen based on the background brightness. In manual dimming mode, use the right lever to adjust the brightness.

Touch mode

Click the button to enter the touch mode setting page.
It provides four modes: rain mode pen mode glove mode and lock mode In locked mode, ALGIZ 10XR will not respond to any touch events on the screen.

Reminder: You can also use the Touch mode/lock physical keys on the ALGIZ 10XR panel to change the touch
mode.

Camera

ALGIZ 10XR is equipped with a 5-megapixel front lens and a 12-megapixel rear lens.
Click the icon to open the camera.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device must not cause harmful interference, and
2. This device must be able to withstand any interference received, including interference that may cause undesired operation.

FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorienting or relocating the receiving antenna.
  Increasing the distance between the equipment and the receiver.

• Connecting the equipment to a different outlet from that to which the receiver is connected.

• Consulting the dealer or an experienced radio/TV technician for help.

Caution: To comply with the limits for an FCC Class B computing device, always use the shielded signal cord supplied with this unit. The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could invalidate the user’s authority to operate the equipment.

FCC RF Radiation Exposure
This equipment complies with the FCC RF radiation exposure limits stipulated for an uncontrolled environment. This device and its antenna must not be co -located or operated in conjunction with any other antennas or transmitters. To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operated in conjunction with any other antennas or transmitters.

ISED Warning

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two condition:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;

CE Compliance

Hereby, Handheld Group AB declares that the radio equipment type ALGIZ 10XR is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: xxxxxx

The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range.

UK Compliance

Hereby, Handheld Group AB declares that the radio equipment type ALGIZ 10XR is in compliance with the Radio Equipment Regulations 2017 (SI 2017/1206).
The full text of the UK declaration of conformity is available at the following internet address: xxxxxx

Restriction or Requirement in the UK: 5150 to 5350 MHz indoor-use only.

Spectrum and maximum power:
Bluetooth 2400 MHz ~ 2483.5 MHz: xx dBm
WLAN 2400 MHz ~ 2483.5 MHz: xx dBm
WLAN 5150 MHz ~ 5350 MHz: xx dBm
WLAN 5470 MHz ~ 5725 MHz: xx dBm
WCDMA band I/VIII: xx dBm
LTE band1/3/7/8/20/28/38/40: xx dBm
5GNR n1/3/28: xx dBm
NFC 13.56 MHz: xx dBuA/m@10m

Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Proper recycling of your product will protect human health and the environment.

Copyright Notice
Copyright © 2010 Handheld Group AB, ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.

Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective owners

Disclaimer
Handheld Group AB reserves the right to make any product changes without notice, including to circuits and/or software described or contained in this manual, in order to improve design and/or performance. Handheld Group AB assumes no responsibility or liability for the use of the described product(s), conveys no license or title under any patent, copyright, or mask works rights to these products and makes no representations or warranties that these products are free from patent, copyright, or mask works rights infringement, unless otherwise specified. Applications described in this manual are for illustration purposes only. Handheld Group AB makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.

Customer Service
Support is provided by Handheld. Visit our website at www.handheldgroup.com to find updated information about the product. You can also contact your distributor, sales representative or our customer support center for further assistance. If you contact our customer support center please have the following information ready before you call:

• Product serial number
• Peripheral attachments
• Software (OS, version, application software, etc.)
• Description of complete problem
• The exact wording of any error messages with print screen images

In addition to this, free technical support is available from our engineers during working hours. We are always ready to provide advice on application requirements or specific information about the installation and operation of any of our products. Please do not hesitate to call or e -mail us.

Manufacturer: Handheld Group AB
Address: Handheld Group AB, Kinnegatan 17 A, SE-531 33, Lidköping, Sweden
TEL : +46 (0) 510-54 71 70 FAX: +46 (0) 510-282 05

References

• Handheld Group - Rugged Computers for Tough Environments
• Handheld Group - Rugged Computers for Tough Environments

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>