handheld Algiz RT8 Unique 8 Inch Android Tablet User Manual

: June 12, 2024
: handheld

Table of Contents

handheld Algiz RT8 Unique 8 Inch Android Tablet
INTRODUCTION
POGO PIN DEFINITION
ENABLING/DISABLING GLOVE MODE
OPEN/CLOSE HDMI
FUNCTION KEYS
FCC
Read User Manual Online (PDF format)
Download This Manual (PDF format)

handheld Algiz RT8 Unique 8 Inch Android Tablet

INTRODUCTION

Appearance of Algiz RT8

FIGURE 1-1 FRONT VIEW OF ALGIZ RT8

FIGURE 1-2 SIDE VIEW OF ALGIZ RT8

Installing the Battery

Insert the battery
Push the battery lock to the close position
Attach the battery cover
Push the battery cover lock to the close position

Removing the Battery

Power off the device before removing the battery
Push the battery cover lock to the open position
Detach the battery cover
Push the battery lock to the open position
Remove the battery

Installing a SIM card

This is how you insert and remove the Nano SIM/micro SD.

Installing a micro-SD card

This is how you insert and remove the Nano SIM/micro SD.

POGO PIN DEFINITION

handheld-Algiz-RT8-Unique-8-Inch-Android-Tablet-
fig-7

ENABLING/DISABLING GLOVE MODE

handheld-Algiz-RT8-Unique-8-Inch-Android-
Tablet-fig-9

OPEN/CLOSE HDMI

If you have purchased the desktop dock accessory and plan on using an external HDMI display, you need to make sure to enable the HDMI function per below : handheld-Algiz-RT8-Unique-8-Inch-Android-Tablet-
fig-10

FUNCTION KEYS

handheld-Algiz-RT8-Unique-8-Inch-Android-Tablet-
fig-11 handheld-Algiz-RT8-Unique-8
-Inch-Android-Tablet-fig-12 handheld-Algiz-
RT8-Unique-8-Inch-Android-Tablet-fig-13

NOTICE:
The SAR limit of Europe is 2.0 W/kg. Device types ALGIZ RT8 has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use on the body is 0.0843W/kg This device was tested for typical body – worn operations with the back of the handset kept O cm from the body. To maintain compliance with RF exposure requirements, use accessories that maintain a O cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with RF exposure requirements and should be avoided.

Working Temperature: -200C +550C
Storage Temperature: -400C – +700C

Charging mode need to operate indoors, please pay attention to the environment temperature should be OOC +450C

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Hereby, [Handheld Group AB] declares that the radio equipment type. [ALGIZ RT8] is in compliance with Directive 2014 / 53 /EU.
The full text of the EU declaration of conformity is available at the following internet address:

www,handheldgroup.com.

This device complies with Part 22 & 24 and Part 27 of the FCC Rules.

SAR INFORMATION

The SAR limit of FCC and ISED is I .6 W/kg averaged over one gram of tissue. Device types ALGIZ RT8 (FCC ID:YY3-118208 and IC: 1 1695A-118208 ) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use on the body is 0.939W/kg. This device was tested for typical body -worn operations with the back of the handset kept O cm from the body. To maintain compliance with FCC and ISED RF exposure requirements, use accessories that maintain a 0 cm separation distance between the user’s body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC and ISED RF exposure requirements and should be avoided.

NOTICE:
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject
to the following two conditions:

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

FCC

Changes or modifications made to this equipment not expressly approved by Handheld Group AB may void the FCC authorization to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installe d and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
This Class [B] digital apparatus complies with Canadian ICES -003. Cet appareil numérique de la classe [B] est conforme å la norme NMB – 003 du Canada. RF mode and power tune-up refer to appendix A

Antenna Type FPC Antenna

Power: