Doona 50646081 Will I Size Isofix Base User Guide

June 17, 2024
doona

Doona Logo Doona i ISOFIX base
i-Size compliant
User guide
Doona 50646081 Will I Size Isofix Base ECER-129

Svitability

The Doona i ISOFIX Base platform is a safety product and should only be used in vehicles with ISOFIX anchor’s and in combination with the Doonai.
For use in your vehicle, please also follow the vehicle manufacturer’s recommendations in your owner’s manual.
The Doona i ISOFIX base can be used in vehicle’s on all i-Size seating positions and on ISOFIX seating positions according to the vehicle lst.

Warnings, important information

Congratulations on choosing Doona i ISOFIX base as your baby’s safety and mobilty solution.
In order fo protect your baby. and allow easy use of the Doona i inside and outside of the car, the Doona i ISOFIX Base must always be used and installed as described in these instructions.
Important – Keep these instructions for future reference. Read these instructions carefully, your child’s safety may be affected if you do not follow these instructions.

ATTENTION
It is not permitted to make any modifications to the Doona i ISOFIX base. Doing so nullifies or impairs its effectiveness in protection.
Regularly inspect the different elements of the Doona i ISOFIX base.
Do not attempt to make adjustments while travelling.
Make sure that all movable parts of the Doona i ISOFIX base are always properly locked in place and that no parts are lodged between movable seats or doors.
Do not place any heavy items on the rear window shelf, these can become dangerous projectiles in the event of an accident.
Always fasten the Doona i ISOFIX base platform on the vehicle anchor points when used in vehicle.
Always make sure that the support leg foot is in contact with the vehicle floor.
Do not use the Doona i ISOFIX base anymore if parts have been damaged or after an accident (at an impact speed greater than 10 km/h)!

Doona i ISOFIX base overview

Doona i ISOFIX base anchor POINS (4X)………………………..1
Body slider lever………………………..2
Doona i release button………………………..3
Support leg angle indicator ………………………..4
Doona i ISOFIX base connector indicator (2x)………………………..5
Lock indicator………………………..6
Doona i seat lock indicator ………………………..7
Support leg indicator………………………..8Doona 50646081 Will I Size Isofix Base -
Figure 1Chassis………………………..9
ISOFIX connectors (2x)………………………..10
Leg adjustment buttol………………………..11
ISOFIX release button (2x)………………………..12
Support leg foot………………………..13
Support leg ………………………..14Doona 50646081 Will I Size Isofix Base - Figure
2Doona 50646081 Will I Size Isofix Base - Figure
3Doona i metal bars …………………………….1
Doona i ISOFIX base vehicle anchor POINES (2x)………………………….2

Use in the vehicle

Doona 50646081 Will I Size Isofix Base - Figure 4The Doona ISOFIX base can be used on alli-size vehicle seat position or on ISOFIX seat position confirmed in the car fitting list.

| On seats featuring ISOFIX fastening points (between seat surface and backrest) ona forward facing vehicle seat.|
---|---|---
| support leg must be opened and directed to the front of the car, so when a car seat is installed, it is rear facing.|
| • Frontal airbag
• Side airbag| No
Yes

Installing the ISOFIX base to the vehicle

Doona 50646081 Will I Size Isofix Base - Figure 8Doona 50646081 Will I Size Isofix Base - Figure
9

Installing the Doona i on the ISOFIX base


ATTENTION

The Doonai has to be properly installed on the Doona i ISOFIX base according to the user instructions. Look up the Doona i user guide for full instructions. Doona 50646081 Will I Size Isofix Base - Figure
11

Removing the ISOFIX base from the vehicle

Doona 50646081 Will I Size Isofix Base - Figure 12

Care instructions

It is recommended to clean the Doona i ISOFIX Base periodically, in order to keep it propery functioning.
Always remove the Doona before cleaning the Doona i ISOFIX Base. It is also recommended to remove the Doona i ISOFIX Base from the carin order fo clean it properly.
To clean the Doona i ISOFIX Base, sponge clean of rinse using warm water, soap and a rag. DO NOT use any solvents or lubrication. Using anything other than soapy water can cause the moving parts fo malfunction.

Car fitting list

This Doona i ISOFIX base fits in combination with the Doona i to all I-Size seating positions in a vehicle. Furthermore for older vehicle seating position fitting please refere o our website.

Warranty

We guarantee that the Doona i ISOFIX Base was manufactured in accordance with the European safety standards and regulations, and it meets the highest standards of quality. For the Doona i ISOFIX Base we provide a 2-year warranty against manufacturing or material defects. The warranty period is effective from the day of purchase. As proof of purchase we ask that you fill out the Warranty Card and retain it for the whole term of the warranty period, together with your sales receipt.
In case of a warranty claim, the Warranty Card must be retumed together with the product to your local distributor.
Please also register your Doona i ISOFIX Base online at: www.doona.com
The Warranty will cover a Doona i ISOFIX Base which has been handled properly.
The warranty does not apply in the following cases:

  • The product shows normal signs of wear and tear.
  • Damage occurs as a result of exposing the product to excessive stress.
  • Damage occurs as a result of inappropriate or improper use.

Warranty card

Please add your details below
Name:…………………………….
Address:…………………………….
Post Code:…………………………….
City/Town:…………………………….
Telephone No. (Including area code):…………………………….
Email address:…………………………….
Doona i ISOFIX Base Serial number:…………………………….
Retailer:…………………………….
Date of purchase:……………………………Doona Logo

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals