HITSLAM 61601 24 Inch Matte Black Towel Bar Installation Guide
- June 17, 2024
- HITSLAM
Table of Contents
SCREW-MOUNT INSTALLATION
Notice ▲ Drillbit size: 7/32 inch (5.5mm)
RECOMMENDED TOOLS
1. Remove the wall-mounted plate
2. Mark the screw holes
3. Drill the holes
4. Tap anchors into predrilled holes
5. Mount plate with screws
7. Tighten the towel bar
WARNING
To reduce the risk of injury or property damage,read all instructions before
installing the product.Wear safety goggles.The product must be installed in
accordance with all state & local plumbing &building codes.Call a professional
if you are uncertain about installing this product.
BATH TOWEL BAR
Installation Support
Missing Parts
Damaged Product
service@hitslamhome.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>