MEEVIZ 006 Hitch Bike Rack Instruction Manual

MEEVIZ 006 Hitch Bike Rack

Product Information

• Specifications:
  • Model: MEEVIZ PLATFORM BIKE RACK
  • Model Number: 006

Product Usage Instructions

• Assembly Instructions:
  • Step 1: Assemble the main bracket (part #1) and side poles (part #3) using carriage bolts M10X45 (part #10) and nuts M10 (part #13).
  • Step 2: Place the main vertical pole (part #2) into the main bracket (part #1) using bolt M10 (part #11) and nut M10 (part #13).
  • Step 3: Attach the universal foot (part #8) to support the main bracket (part #1) tube using bolt M12 (part #12) nut M12 (part #14), and plug 10 (part #15).
  • Step 4: Insert plastic blocks (part #22) into the wheel cradles (parts #4 & #5) and frame support arms (parts #6 & #7) using bolts and knobs (parts #23 & #24).
  • Step 5: Slide the wheel cradles (parts #4 & #5) onto the side pole (part #3), adjust the position according to the bike tyre, load the bike wheels into the cradles, and tighten the knobs to lock them in place.
  • Step 6: Install the frame support arms (parts #6 & #7) onto the vertical pole (part #2), tighten the knob after placing the bike, and secure the support arms using plug 6 (part #21).
  • Step 7: Insert the universal foot (part #8) into the car’s rear receivers. Place the anti-wobble part (part #20) inside the pipe, and secure with thread bolt, washer, spring washer, and pin (parts #16, #19, #18 & #17).
• Folding Instructions:
  • Pull out the quick-release pin (part #9) to fold the vertical arm left or right.
• FAQ:
  • Q: How do I adjust the position of the wheel cradles?
  • A: Slide the wheel cradles onto the side pole and adjust their position according to the bike tyre before loading the bike wheels into them.
  • Q: What is the purpose of the anti-wobble part?
  • A: The anti-wobble part helps to stabilize the bike rack on the car by reducing any wobbling or movement during transportation.

WARNING

• Read this manual thoroughly before installing and using your bike carrier. Failure to follow instructions could result in serious injury to a person or property.
• The bicycle carrier should not be used for TOWING or any pulling purpose.
• The weight capacity of this carrier is 180 lbs.
• DO NOT exceed the rated capacity of this bike carrier.
• For use with bikes that have tyres less than 5 inches wide.
• DO NOT use this bike carrier for transporting or carrying other items or materials besides bicycles.
• Using the bike carrier for rough off-road terrain is not recommended.
• Not for use on off-road terrain.
• Read this owner’s manual before using your bike rack. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference.

Part List

Assembly Instructions

• Step 1
  • Assemble the main bracket (part #1) and side poles (part #3) using carriage bolts M10X45 (part #10) and nuts M10 (part #13).
• Step 2
  • Place the main vertical pole (part #2) into the main bracket (part #1) by using bolt M10 (part #11) and nut M10 (part #13).
• Step 3
  • Attached universal foot (part #8) to support the main bracket (part #1) tube, using bolt M12 bolt (part #12) and nut M12 (part #14), and using plug Φ10 (part #15).
• Step 4
  • Put 2pcs plastic block (part #22) into the wheel cradles (part #4 &#5) with the bolt and knob (part #23 &#24).
  • Put 2pcs plastic block (part #22) into the frame support arm (part #6 &#7) with the bolt and knob (part #23 &#24).
• Step 5
  • Slide the wheel cradles (part #4 &#5) onto the side pole (part #3). It could adjust the position according to the bike tyre.
  • Load the bike wheels directly into the cradles and ensure they will not roll back and forth. Tighten the knobs on the cradles to lock them into position.
• Step 6
  • Install the frame support arms (parts #6 &#7) onto the vertical pole (part #2), and tighten the knob after putting the bike. Secure the support arms by using a plug (part #21).
• Step 7
  • Insert universal foot (part #8) into a 2” receiver on the rear of the car.
  • Put the anti-wobble part (part#20) inside the pipe.
  • Content with thread bolt, washer, spring washer and pin (parts #16, #19, #18 &#17).

Folding Instructions

• Pull the quick-release pin (part #9) out, the vertical arm can be folded left and right.g
• Pull out the plug (part #15), and rotate the rear frame part forward by 90°.
• Model# 006

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>