Tribit BTH80 CallElite 81 Wireless Office Headset User Manual

Tribit BTH80 CallElite 81 Wireless Office Headset

Product Information

Specifications:

• Model: BTH80
• Frequency Range: 2.402GHz ~ 2.480GHz
• Max. Transmission Power: 6dBm

Package Contents:

• Tribit CallElite 81 Headset
• Charging Base
• USB Dongle

Buttons Functionality:

• Increase the volume: Short press + button
• Decrease the volume: Short press – button
• Next track: Press and hold + button for 2s
• Previous track: Press and hold – button for 2s
• Play / Pause: Short press MFB button
• Answer / End a call: Short press the MFB button
• Reject an incoming call: Press and hold the MFB button for 1s
• Activate / Turn off Siri: Press and hold MFB button for 2s
• Clear the pairing list: Press and hold the MFB and + buttons for 4s in the power-on state simultaneously

Product Usage Instructions

Power On / Off:

1. Power on: Press and hold the MFB button for 2s until there is a prompt voice “Power on”. The green LED indicator will glow steadily for 2s.
2. Power off: Press and hold the MFB button for 4s until there is a prompt voice “Power off”. The red LED indicator will flash for 1s and then turn off.

Bluetooth Connection:

1. Press and hold the MFB button for 4s until the green LED indicator flashes to enter Bluetooth pairing mode.
2. Open the Bluetooth menu on your phone, and select the audio device named Tribit CallElite 81 to begin pairing.

Mute Button:

1. In the conversation state, short press the mute button for mute, short press again to unmute.
2. The mute function is only valid during the conversation.

Voice Prompt:

• Power on: “Power on”
• Power off: “Power off”
• Pairing: “Pairing”
• Battery low reminder: “Battery low”

Charging Instruction:

• Charge the headset by connecting one end of the USB-C charging cable to a 5V power adapter and the other end to the charging base.
• The red LED indicator will glow steadily during charging and turn steady green when fully charged.

Frequently Asked Questions (FAQ)

• Where can I find the EU Declaration of Conformity?
  You can find the EU Declaration of Conformity at the following internet address: EU Declaration of Conformity.

• How do I clear the pairing list?
  To clear the pairing list, press and hold the MFB and + buttons simultaneously for 4s in the power-on state. The headset will automatically go back to pairing mode.

Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wireless Headset BTH80 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration conformity is available at the following internet address: http://files.Tribit.com/BTH80-DOC-EN.pdf

Package Contents

Product Illustration

1. Volume –
2. Volume +
3. MFB button
4. LED Indicator
5. USB-C Charging Port (headset jack)
6. USB-C Charging Port (charging base)
7. MIC Bar
8. Mute button
9. USB Dongle

Specifications

Power On / Off

1. Power on: Press and hold the MFB button for 2s until there is a prompt voice “Power on”. The green LED indicator will glow steadily for 2s.
2. Power off: Press and hold the MFB button for 4s until there is a prompt voice “Power off”. The red LED indicator will flash for 1s and then turn off.

Bluetooth Connection

1. Press and hold the MFB button for 4s until the green LED indicator flashes, and then the headset will automatically enter Bluetooth pairing mode. The red /green indicator lights will flash alternately
2. Open the Bluetooth menu on your phone and refresh the Bluetooth device list, then select the audio device named “Tribit CallElite 81” to begin pairing.

Mute Button

1. In the conversation state, short press the mute button and there is a prompt voice “Mute on”. Then the conversation will be muted.
2. In the mute state, short press the mute button and there is a prompt voice “Mute off”. Then the conversation will be restored to normal.
3. The mute function is only valid during conversation. When you put someone on mute, they aren’t able to hear anything you’re saying but you can still hear them. For any third-party software, you may probably set the mute function on the device it connects to.

Buttons Functionality

Clear the pairing list

|

Press and hold the MFB and + buttons for 4s in power-on state simultaneously to clear the pairing list, and then the headset will automatically go back to pairing mode.

Voice Prompt

Charging Instruction

1. Charge the headset directly
   Connect one end of the USB-C charging cable to a 5V power adapter (not included), and the other end to the headset. The red LED indicator will glow sturdily during charging while it will change steady green after the headset is fully charged.

2. Charge the headset by the charging base Connect one end of the USB-C charging cable to a 5V power adapter (not included), and the other end to the charging base. The red LED indicator will glow sturdily during charging while it will change steady green after the headset is fully charged.

3. Note:
   Once the headset is placed on the charging base, it will automatically shut off. After charging, the headset will auto power on and connect to the last device once you remove it from the charging base

USB Dongle

1. For the first use, please insert the dongle into the USB interface of your computer to power it on. It will auto-enter the pairing state (blue indicator flashing).
2. Power on the wireless headset, and try to get the headset as close as possible to the dongle, and then it will auto-connect to the dongle successfully in about 30s. If it has ever been paired, the headset will auto-connect to the dongle each time when it is powered on.
3. After that, you can listen to music or chat with others if your computer is playing music or in an online conversation.

FAQs

• Q: What devices does the headset work for?
  A: The headset is suitable for those Bluetooth-enabled Android, iOS, and PC devices.

• Q: Does the dongle support plug-n-play or do I need to download a driver before use?
  A: It supports plug-n-play. No need to download any drivers.

• Q: The headset beeps after using for a while.
  A: Please charge the headset for a certain time to make sure it isn’t in low battery condition, or the mute function is activated.

• Q: Does it have mute function?
  A: Yes but the mute function is only valid during conversation. For any third- party software, you may probably set the mute function on the device it connects to.

• Q: What are the charging ways for this headset?
  A: The headset can be charged by connecting to the charging base or to a power outlet directly through the provided USB-C cable.

• Q: How to mute a conversation?
  A: Click the mute button during the conversation, and you will hear the voice of “Mute on” and then the conversation will be muted. Click the mute button again to restore the conversation, and you will hear the voice of “Mute off”.

• Q: How to clear off the pairing list (reset the headset)?
  A: Press and hold the MFB button and volume + button for 5 seconds, then the LED indicator will light off for 1 second and then flash in red/green alternately. You will hear the voice of “power on” and “pairing”, which indicates the headset has entered pairing state.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions：

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>