B0BBQQTXNB LED Fan with Remote Control and TUYA App Control Instruction Manual
- June 17, 2024
- Tuya
Table of Contents
B0BBQQTXNB LED Fan with Remote Control and TUYA App Control
Product Specifications
- Voltage: 3V
- Current: Not specified
- Protection Grade: Not specified
- Watt: Not specified
- Lumen: Not specified
- Dimension: Not specified
- Controller: Remote and TUYA app
Product Usage Instructions
Installation:
- Switch off electricity before installation.
- Mount the ceiling plate securely.
- Connect the wires according to the provided instructions.
- Install the fan on the ceiling plate.
- Switch on electricity after installation is complete.
- You can now control the fan using the remote control or the TUYA app.
Remote Control Instructions:
- Functions include turning the light on/off, night light mode, adjusting color temperature and brightness, setting timer for the fan, and changing fan rotation direction.
- Battery requirement: 2 x AAA, 1.5V
- Control distance: Up to 6 meters
- Output: Radiofrequency
TUYA App Instructions:
- Download and install the TUYA app from the App Store.
- Ensure your phone is connected to a 2.4 GHz WIFI network.
- Scan the QR code or search for ‘Tuya Smart’ in the App Store to download and install the app.
- Follow the in-app instructions to register or log in to your account.
- Add your smart lamp to your account by following the steps provided in the app.
- You can now control your LED fan through the TUYA app by adjusting brightness, color temperature, color, and setting ambiance scenes.
Safety guidelines
Notes on disposal
The product is designated for separate collection at an appropriate collection point. Do not dispose of the product with household waste. For more information, contact the retailer or the local authority responsible for waste management.
Care
Before cleaning the unit, disconnect it from the power outlet, if necessary.
Do not use aggressive cleaning agents.
Warranty
The unit has been carefully checked for defects. If nevertheless, you do have
cause for complaint, please go back to the retailer where you have bought the
product together with your proof of purchase.
Safety
General advice
- – Read the manual carefully before use. Keep the manual for future reference.
- – Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual.
- – Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- – Do not modify the product in any way.
- – Do not expose the product to water or moisture (IP20).
- – Do not immerse the product into water (IP44 – IP66).
- – Keep the product away from heat sources.
- – Do not block the ventilation openings.
- – Do not look directly into the light source of the LED lamp.
- – Keep a minimum distance of >2 metres between the lamp and the surface being illuminated.
Electrical safety
- – To reduce risk of electrical shock, this product should only be opened by an authorized technician when service is required.
- – Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
- – Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Warning
- – The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified agent.
- – Caution, risk of electric shock.
- – The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire has to be destroyed.
- -This product is not a toy – please keep it inaccessible for children.
Disclaimer
We reserve the right to make technical modifications without notice. We are
not liable for damage arising from incorrect handling, improper use or wear or
tear.
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union.
The product complies with all applicable specifications and regulations in the
country of sales.
The declaration of conformity is available upon request.
CE declaration
This product complies with the following directives:
- LVD: 2014/35/EU (Not applicable for solar products)
- EMC: 2014/30/EU
- RoHS: 2011/65/EU
- Additionally, for products with Radio transmitter units: RED: 2014/53/EU
FAQ
Q: How do I reset the remote control?
A: To reset the remote control, remove the batteries and press all buttons
simultaneously for 5 seconds. Then reinsert the batteries.
Q: Can I use the TUYA app to control multiple LED fans?
A: Yes, you can control multiple LED fans using the TUYA app by adding each
fan to your account within the app.