DUOBACK DUORESTON ON Smart Sensor Cushion Apps User Manual
- June 5, 2024
- DUOBACK
Table of Contents
PRODUCT MANUAL
Introduction
[User] [Application]
Measurement Alarm&Feedback
‘Duorest on’ is a new service that helps improve the way users sit by collecting data from pressure distribution sensors and analyzing posture.
Featuer
1. Accurate and diverse posture analysis
Pressure sensors are distributed in detail on the front of the cushion to
analyze the user’s posture in detail. And artificial intelligence algorithms
improve the accuracy of analysis as user data accumulates.
2. Convenient IoT Technology
You can check user’s sitting habits and statistics by period through your
smartphone at any time. Experience new solutions to improve sitting habits
through the fusion of duorest ergonomic design and IoT technology.
3. Sitting posture manager
‘Duorest on’ offers customized alarms, statistical analysis, and health
content on your smartphone to analyze your posture and improve your sitting
habits.
Button part Introduction
- Power Button Status LED
- Micro-USB 5pin port
STATUS LED
POWER
on off Sleep mode
(Blue LED)
Connecting to server Connection to server failed
Blue LED Flashes Fast Red/Blue LED cross flashing
CHARGE
Power on – – – – – – – –
Low Battery Charging Charging complete
(Red LED) (Pink LED) (Blue LED)
Power off
(or Sleep mode) – – – – – – – –
Charging Charging complete
(Red LED) (Green LED)
Register Device
1 Please select the Duorest On product you purchased.
2 Turn on the Bluetooth feature on your smartphone, press the product
power button for 2 seconds to activate the product, and then press the Next
button.
3 Select the device that works with your smartphone.
If it does not appear in the list, please click Refresh in the upper right
corner.
4 Please check if registration is complete. If the power button has a
blue LED light, the connection was successful.
Please press the confirmation button.
5 Registration completed successfully. Please press OK button.
6 Please enter the basic information of the actual user to improve
posture analysis accuracy.
7 Follow the instructions in the app to register the correct posture of
the user.
8 Correct posture registration completed.
If you want to use the app immediately, select No (close) or Yes to see the
real-time posture applied to the product.
9 You can check the sitting position for 60 seconds. If you want to
complete the posture check, please press the Close button.
Access the application’s main screen.
Real-time attitude analysis causes delays of approximately 3 seconds during
the data transmission process.
How to Use
1 Current State Information
Provide information on the user’s current posture to the correct posture
today, and the total amount of time spent sitting. You can see the battery
status of the device and whether or not the charger is connected.
2 Postural Analysis Statistics
- I will show you how to sit and how to sit during the week and the month.
- You can change the date to review the records of other days.
- Click the right arrow to see the ranking of the eight positions.
- Review the correct posture ratio for the selected week and the ability to achieve your target relative to your sitting time.
Regulation Information
This equipment has been tested and found to comply with the limits for a Class
13 digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Caution:
Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void user’s authority to operate the
equipment. This appliance and its antenna must not be co-located or operation
in conjunction with any other antenna or transmitter.
A minimum separation distance of 20 cm must be maintained between the antenna
and the person for this appliance to satisfy the RF exposure requirement.
DUOBACK CO.,LTD.
- Headquarters (Factory)
27, Gajaeul-ro 32 beon-gil, Seo-gu, Incheon 22829, Korea - Sales Office
1002, 41, Digital-ro 31-gil, Guro-Gu, Seoul, 08375, Korea
Tel: +82-2-6204-2584 Fax: +82-32-816-4817
E-mail: export@duoback.co.kr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>