ITC BAL-SS-1C-1622 MOD Leg System Instruction Manual
- June 3, 2024
- ITC
Table of Contents
ITC BAL-SS-1C-1622 MOD Leg System
INSTALLATION INSTRUCTIONS
PARTS/TOOLS NEEDED:
| | 
| | ****
Wall Base & Shim| Vertical &
Horizontal Legs
| Table Base| Screws
(not provided)
| Power Drill
(not provided)
IMPORTANT SAFETY INSTRUCTIONS. READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS
- Disconnect power before installing, adding, or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive (+) input.
- Find a solid, secure wall to mount your MOD Leg system. Place the wall base and mark the screw holes, pre-drill. Screw in the base and shim (if using), using screws (not provided) appropriate for the mounting substrate.
- Slide the vertical leg into the wall base. Use the handle on the side to tighten and secure the vertical leg.
- Place the horizontal leg on top of the vertical leg and repeat the tightening process with the handle on the horizontal leg.
- Attach the table base to the table (customer provided) using the screws (not provided) appropriate for the substrate. Place the table on the top of the horizontal leg and repeat the tightening process with the handle.
-
3030 Corporate Grove Dr. Hudsonville, MI 49426 Phone: 616.396.1355
-
For warranty information please visit www.itc-us.com/warranty-return-policy DOC #: 710-00202
-
Rev B
-
10/24/22
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>