IK HC 1.5 Solvent Resistant Sprayer Instruction Manual

HC 1.5 Solvent Resistant Sprayer

Ref. 8.17.74.200

Thanking you for the trust placed in us. Please read this instruction sheet carefully before using the sprayer.

The following table shows several examples of the most frequently used aggressive substances and the model recommended for each use. Follow the specified maximum percentages

| | IK MULTI| IK  LKALINES| IK HC
---|---|---|---|---
ACIDS| ACETIC ACID| L| | X
AGEE CHERIKAIOUE| | L| X
HYDRORUORIC ACID| X| X| X
ACES PHOSEHORIOUE| | L| X
ACICE NITRIDUE| | L|  X
 SULPHURIC ACID| | L| X
FESTES ACIDES| | L| X
ALCOHOLS| RANCE / BISIANOL /13UTANO1 / BUTANO1 / BUTANOL/ BUTANE / BUTANOLO| L| | X
ETHANOL| L| | X
METHANOL| L| | X
OTHER ALCOHOLS| L| | X
HYDROCARBRES AUPHATIOUES| DECANE| L| X|
NEFIANE| L| X|
HID(ANE| L| X|
PBNTANE| L| X|
HYDROCARBURES AROMATIOIRS| 11MRIENE| L| X|
NAPHTHALENE| L| X|
TOLUENE| L| X|
MIND / XYLENE I XYLENE| L| X|
OILS AND PEIRIOEUM PRODUCTS| MNERALVEGETAL 011| L| X|
GAS311| L| X|
GASOUNE| L| X| 1 V
KEROSENE AERCISENE| L| X|
MIRE SPIRIT| L| X|
AMINES AND KETONES| ACETONE| X| V| X
AMMI”INIA| L| |  X
SODIUM HYDROXIDE (caustic soda)| X| | X
(Potasa caustica1/ POTASSIUM HYDROXIDE| X| | X
SODIUM RYPDCHLORITE| L| L| X

Optimum
L Limited
X Not valid
The apparatuses are not suitable for working with many halogenated solvents.

PART LIST

ADJUSTABLE CONICAL NOZZLE
1070| | | COMPLETE CHAMBER
| 8.17.74.801| 1| INSTRUCTION SHEET
| 8.17.74.200| 1| PACKAGING
| 8.17.74.201| 1|

FIELD OF APPLICATION

Industrial sprayer especially manufactured with highly resistant materials for use with animal and vegetable oils, hydrocarbon-based solvents, lubricants and petroleum products in applications such as: brake cleaning, tar removal from vehicle bodies and tools, machinery and motor cleaning, lubricant application; cleaning of car interiors, degreasing, wood treatments, waterproofi ng and de- waxing vehicles etc.
Given the great variety of products in the market, Goizper cannot guarantee the universal validity of its equipment. In any case, we recommend using certified chemicals.

SETTING UP & SPRAYING

1. Screw tightly to close. Depressurize the device to open pulling the safety valve.
2. Once the tank has been filled to the maximum level of 1 litre, screw the lid back on and pressurize the tank using a pumping action 15 times.
3. To commence spraying, press the handle as you go and offset pressure loss by giving more strokes.

MAINTENANCE

1. After each use depressurize the sprayer and clean it with water.
2. In the event of obstruction of the nozzle, clean it with water and do not use metallic objects.
3. In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts.
4. To access the valve chamber (165), remove the cylinder guard by pulling it fi rmly.
5. To access the rod’s O-ring (603), unscrew the piston and remove it until leaving visible the aforementioned O-ring.

USES AND SECURITY REGULATIONS

1. Always follow the instructions and dosages on the packaging labels, that the manufacturer recommends for the chemical product to be used.
2. In order to avoid any swallowing of the product, do no eat, drink or smoke whilst handling the treatments.
3. Do not use the spray on persons, animals, or electric installations.
4. Do not use the treatment when there is strong wind or extreme heat.
5. In case of poisoning, seek a physician, taking the labelling of the chemical product with you.
6. Do not dump product or cleaning residues near water bodies, wells, etc… that will be utilized for use by – human or animal consumption.
7. Use appropriate safety equipment, mask, goggles, gloves, footwear etc in order to avoid contact of chemical products with skin, eyes and mouth.
8. Read the instructions for the sprayer before its use. Do not modify the sprayer. Do not connect it to an external pressure source (manual use only). Do not obstruct or strike the safety valve. Do not use the sprayer if it is damaged, deformed or altered from its original shape. Store the sprayer protected from frost and fierce heat (between 5º and 30º C).
9. Air pressure may be a dangerous factor, utilise the sprayer with precaution.

TECHNICAL SPECIFICATIONS

– Total capacity: 1.50 l – 0.39 U.S. Gallons.
– Useful capacity: 1 l – 0.26 U.S. Gallons.
– Net weight: 0.46 kg – 1.02 lbs.
– Gross weight: 0.60 kg – 1.32 lbs.
– Maximum pressure: 2.5 bar – 42 psi.
– Litres/min. 3 bar: 0.50 l/min – 1 pint/min.
– Joints and materials resistant to oils and most hydrocarbons and solvents.
– 2.5 bar safety valve.
– Large fi lling aperture.
– Ergonomic design.
– Strong translucent tank with level indicator.
– Protective sleeve for valve chamber.
– Easy assembly and disassembly for maintenance.

C/ ANTIGUA, 4 – 20577 ANTZUOLA
Apartado 21 1 – 20570 BERGARA – GUIPUZCOA – SPT el.:  34-943 786000
Fax: 34-943 766008
goizper@goizper.com
www.goizper.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>