IK Multimedia TONEX ONE Guitar Amp Modules Pedal User Guide
- June 1, 2024
- IK Multimedia
Table of Contents
- IK Multimedia TONEX ONE Guitar Amp Modules Pedal
- Product Information
- Product Usage Instructions
- Alternative Parameters Editing
- MAIN OPERATION
- TWO PERFORMANCE MODES
- GLOBAL SETUP
- 20 PRESETS INSIDE
- OTHER FEATURES
- TONEX for Mac/PC
- Librarian
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
IK Multimedia TONEX ONE Guitar Amp Modules Pedal
Product Information
Specifications
- Main Parameters: BASS, MID, TREBLE, VOLUME
- Performance Modes: Dual Mode, Stomp Mode
- Global Setup Options: Cabinet Bypass, Input Trim, Global Volume
- Preset Slots: 20 presets
- Other Features: Safe Mode, Tuning Modes, TONEX for Mac/PC compatibility
Product Usage Instructions
Main Operation
To edit main parameters:
- Rotate the micro and main knobs to adjust BASS, MID, TREBLE, and VOLUME.
- For the VOLUME knob, it controls the model volume or compressor’s make-up gain (when set to post).
Alternative Parameters Editing
- Press ALT to enter alternative parameter editing mode (micro knobs and ALT LED will blink).
- Adjust GATE threshold, Compression, Reverb, and GAIN using the micro and main knobs.
Footswitch Operation
To operate the footswitch:
- Press the footswitch to toggle between preset A and B or bypass the pedal.
- Hold the footswitch to enable the Tuner.
Frequently Asked Questions (FAQ)
-
How do I access the global setup?
To access the global setup, hold ALT for 6 seconds. -
How many presets are available?
There are 20 presets available inside the device. -
How do I enter safe mode?
Hold ALT for 3 seconds to access the safe mode. To disable safe mode, hold ALT for 3 seconds again.
MAIN OPERATION
Edit main parameters
Edit BASS, MID, TREBLE and VOLUME* by rotating the micro and main knobs.
*The volume knob edits the model volume or the compressor’s make-up gain when the compressor is set to post.
Edit alternative parameters
- ****Press ALT (the micro knobs and ALT LED start blinking).
- ****Edit GATE threshold, Compression, Reverb and GAIN by rotating the micro and main knobs.
Footswitch
- ****Press the footswitch to toggle between preset A and B or to bypass the pedal, depending on the play mode.
- ****Hold the footswitch to enable the Tuner.
TWO PERFORMANCE MODES
Dual mode
The dual mode (default) allows to switch between Preset A and Preset B by
pressing the footswitch.
Stomp mode
The stomp mode is perfect if you need to use TONEX ONE as a stomp. Use it as a
boost/overdrive/distortion/fuzz pedal and bypass it using the footswitch.
GLOBAL SETUP
To access the global setup, hold ALT for 6 seconds.
Changing mode
- ****Rotate the BASS micro knob fully counter-clockwise to set the pedal in dual mode.
- ****Rotate the BASS micro knob fully clockwise to set the pedal in stomp mode.
Global cabinet bypass
- ****Rotate the MID micro knob fully counterclockwise to have the cabinet active on all presets.
- ****Rotate the MID micro knob fully clockwise to bypass the cabinet on all presets.
Input trim
Use the TREBLE micro knob to set your input level using its LED color as
metering.
Global volume
Rotate the main knob while in global setup to set the pedal’s global volume
.
20 PRESETS INSIDE
- Browsing mode
****Press the footswitch + ALT to access the browsing mode.
When in browsing mode, the 3 micro knobs refer to the three presets slots.
- ****BASS – Dual mode, preset A
- ****MID – Dual mode, preset B
- ****TREBLE – Stomp mode preset
After the first blink, each knob will display the color of each related preset.
Once in browsing mode, the blinking micro knob indicates the selected preset slot.
- To change the preset loaded in the selected slot, turn the corresponding micro knob. The micro knob will change color according to the selected preset.
- You can also use the volume/gain knob to adjust the selected preset volume/ gain using ALT to toggle between the two parameters.
- To select the next preset slot, press the footswitch.
- Once all preset slots are assigned as needed, press ALT + footswitch to go back to play mode.
OTHER FEATURES
-
Safe mode
Hold ALT for 3 seconds to access the safe mode. In this mode, the pedal is protected from unwanted editing while performing. Hold ALT for 3 seconds to disable the safe mode. -
Tuning modes
Hold the footswitch to access the tuner. While the tuner is active, press ALT to toggle between mute and thru tuning modes.
TONEX for Mac/PC
-
ToneNET
TONEX for Mac/PC lets you browse among 25,000+ free Tone Models and Premium Collections to transfer to TONEX ONE and expand your Tone Model locker. -
Edit, transfer and backup
The librarian function inside TONEX for Mac/PC lets you edit all advanced parameters: transfer presets, backup your pedal library and update its firmware for new features. -
TONEX Plug-in
With the TONEX plug-in, you don’t need to re-amp your guitar tracks in your sessions. Find the perfect tone right inside your DAW.
Librarian
REGISTER
Register now TONEX ONE to:
- Activate your warranty
- Get enhanced app features
- Get JamPoints discount on IK products
Register here:
For the complete user manual, visit:
ikmanual.com/tonexone-user-manual
Latest revision: 2024/04/12
Version: 1.0
Revision: 4
IK Multimedia Production srl
Via dell’Industria, 46 – 41122 Modena, Italy
Phone: +39 059 285496
CF/PI: IT02359550361
SDI: M5UXCR1
IK Multimedia US, LLC
590 Sawgrass Corporate Pkwy. – Sunrise, FL 33325
Phone: 954-846-9101
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>