IK WORLD TECHNOLOGY IKI108 Cloud Ant IoT Smart Camera Instructions

IK WORLD TECHNOLOGY IKI108 Cloud Ant IoT Smart Camera

Product Information

Specifications:

• Model: XJGJ 11
• Type: IP Camera
• Bluetooth Support: Yes
• Wifi Frequency Band: 2.4GHz

Product Usage Instructions

Bluetooth Binding:
To bind the camera via Bluetooth, follow these steps:

1. Ensure your phone’s Bluetooth is turned on and authorized for app access.
2. Place the camera close to the router during connection.
3. Click the + sign in the upper right corner to enter the binding interface.
4. Wait for the camera to emit a sound (Dididi).
5. On your mobile phone, detect the device and select Bluetooth binding.
6. Enter the wifi password and complete the setup.

FCC Warning:
If you encounter interference or connectivity issues, follow these FCC guidelines:

• Reorient or relocate the receiving antenna.
• Increase separation between equipment and receiver.
• Connect the equipment to a different circuit than the receiver.
• Consult a dealer or technician for assistance.
• Maintain a minimum distance of 20cm between the radiator and body.

Frequently Asked Questions (FAQ)

1. Q: What should I do if my model does not support Bluetooth binding?
   A: If your model does not support Bluetooth binding, please refer to the list of actual supported models provided by the manufacturer.

2. Q: Can I use Bluetooth binding without a wifi connection?
   A: No, Bluetooth binding only supports wifi connection in the 2.4GHz frequency band. Make sure your phone’s Bluetooth is turned on and authorized for app access.

Download Yi loT app
Scan QR code below

Search and download
Yi loT app
In Google play

In App store

Sign up and log in

How to add camera

How to connected with Wi-fi

If you don’t hear the sequence, please press the “RESET” on the device. Continue for more than 5 seconds, until you heard the sequence, that means the reset is successful.

Note:

1. 5GHz wireless band is not supported;
2. Please turn on location of phone

The QR code that appears on the mobile phone is scanned against the camera lens, and the device emits a prompt sound “QR code scan successful” and “WiF connected”, click Next, and wait for the network configuration to be completed.

Bluetooth binding added

Bluetooth binding added
Click the “+” sign in the upper right corner to enter the binding interface, wait for the machine to start and send the sound of “Dididi”, After that the mobile phone will detect the device to be configured and pop up window or click “Bluetooth+wifi connection” in the upper right corner to select Bluetooth binding, Click “Next” to enter the wifi password and click “Next” to wait for it to be added.
Tips: Bluetooth binding only supports wifi connection in the 2.4GHz frequency band, and at the same time The phone needs to turn on the Bluetooth switch, and authorize the APP to allow Bluetooth access;
(Please make sure the camera is as close as possible to the router during the connection), part of the model does not support Bluetooth binding, please refer to the actual supported model.

How to use app

Cloud storage

Common problem

Q: The camera is offline or offline

1. Check if the power supply is working properly
2. Power off and restart the device to reconnect to the network
3. The signal coverage is weak
4. Signal interference shielding in special places

Q: How does the camera store video

1. The camera supports the F32 format with a maximum capacity of 64G. After the card is recognized, it automatically records, and when the storage is full, it automatically overwrites the original recording and loops recording;
2. Support opening cloud storage service to store video:

Special statement
The product is subject to the actual product, the instruction manual is for reference only Mobile phone app and device firmware version support update, users can upgrade through the app. The manual may contain technical descriptions or inconsistencies with product functions or typographical errors. Please understand, please refer to the final interpretation of our company. Do not install the product in a place where it is damp, dusty, high temperature, flammable or explosive and out of reach of children.

FCC Warning

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>