IK MULTIMEDIA IP-ILOUD-MM-IN iLoud Micro Monitor User Manual

: June 6, 2024
: IK Multimedia

Table of Contents

iLoud Micro Monitor overview
Installation and setup
Control panel
Speaker’s connection ports
Bluetooth pairing
Acoustic setup
Troubleshooting
Warranty
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

IK MULTIMEDIA IP-ILOUD-MM-IN iLoud Micro Monitor User Manual

iLoud Micro Monitor

Thank you for purchasing iLoud Micro Monitor.
Your package contains

iLoud Micro Monitor speakers
Power supply unit
Speakers connection cable
RCA cable
Quick start guide
Registration card

iLoud Micro Monitor is a full-featured ultra-compact stereo monitoring system.
It’s a pair of portable studio monitors with a professional-quality bi- amplified design that provides an honest and accurate sound with a true linear frequency response.

iLoud Micro Monitor is powered by four amps that deliver a combined 50 W RMS of power. Each offer extreme clarity and superior bass response via two 3/4” tweeters and two 3” woofers.
These features are augmented by an on-board 56-bit DSP processor. It gives you total control of the monitor’s performance, allowing for stunningly accurate and detailed sound that’s hardly believable considering the size and price.

It can be adjusted to suit different playback situations thanks to its speakers’ two positionable angles of inclination and three dedicated EQ switches: bass, treble and a “free field”/”desktop” compensation switch. These switches let you optimize its sound for your listening environment. It also comes with a full range of source options that includes Bluetooth streaming as well as RCA and 1/8” inputs.

iLoud Micro Monitor is perfect for mixing, mastering, composing, producing, critically listening and more in a wide variety of situations both while traveling and while at home or in the studio.

Register your iLoud Micro Monitor

By registering, you can access technical support, activate your warranty and receive free JamPoints™ which will be added to your account. JamPoints™ allow you to obtain discounts on future IK purchases! Registering also keeps you informed of all the latest software updates and IK products.

Register at: www.ikmultimedia.com/registration

iLoud Micro Monitor overview

Product overview

Installation and setup

We recommend using high-quality audio cables to guarantee optimal performance. It is important to ensure the speakers stand firmly on a solid ground. Please note that the loudspeakers will need a few days to achieve optimum sonic performance.

Make sure that the volume control of iLoud Micro Monitor is set to minimum. Make sure that the ON/OFF switch on the rear panel is set to OFF.
Connect the speakers with the included connection cable.
Connect the included PSU to the DC socket on the left speaker.
Connect your sound source to the left speaker. You can use both the 1/8” jack input or the unbalanced RCA stereo inputs.
Switch ON the main ON/OFF switch on the rear panel of the left speaker.
It is also possible to stream audio wirelessly by pairing a Bluetooth® device with iLoud Micro Monitor.
Play audio from your audio source and slowly raise the volume of the iLoud Micro Monitor to a comfortable listening level.
If needed, adjust the speakers response with the dedicated controls on the rear panel of the left speaker.
If needed adjust the speakers inclination with the tilting pads.

Note: Before plugging in and turning on, remember the “last on, first off” rule of powered speakers. When powering up your system, be sure that all the wires are connected, turn your mixer/interface and any other outboard gear on, and then last turn on your iLoud Micro Monitor. When powering down, turn your iLoud Micro Monitor off first and then your mixer/interface and outboard gear.

Control panel

**Audio inputs

**

RCA unbalanced line input
These RCA jacks allows for the connection of line sources (i.e., mixer/audio interface bal/unbal line out) both for the Left and Right channel.

1/8” AUX unbalanced input
This unbalanced line input allows for the connection of stereo unbalanced audio sources (i.e., computer stereo output, music player stereo output, smartphone/tablet stereo output).

Speaker’s connection ports

These ports (present on both speakers) allows you to connect the active speaker (Left port) with the passive speaker (Right one). These are 4 pins connectors: in this way is it possible to carry the powered signal both for the HF driver and the LF driver.

Bluetooth pairing

The iLoud Micro Monitor uses Bluetooth® to stream high quality audio from your Bluetooth® enabled device without the need to connect any audio cable. In order for your device to work with the iLoud Micro Monitor it must first be paired. To pairing your device:

Turn the back panel volume control counter-clockwise to the -INF position.
With the iLoud Micro Monitor and your Bluetooth® device powered on: press the PAIRING button on the rear panel of the Left speaker to make the speaker discoverable. The front panel indicator will slowly flash blue.
In the settings of your Bluetooth® device, set it to “discover” available devices.
From the Bluetooth® device list, select the “iLoud Micro Monitor” device.
iLoud Micro Monitor indicates that pairing is complete when the indicator returns steady white. You can now stream audio from your device to the iLoud Micro Monitor: only when there’s an audio streaming the LED turns steady blue.
With the volume control on your Bluetooth® device turned up, play some music and slowly raise the iLoud Micro Monitor volume control until you have reached the desired level.

**Volume

**

This potentiometer allows you to adjust the input level of the audio source.

**Power switch and DC input

**

Power switch: this rocker-style switch allows to power on and off iLoud Micro Monitor. DC IN: connect the (included) PSU to this DC socket.
IMPORTANT: before to connect/disconnect the DC input, make sure that the power switch is set to Off.

Acoustic setup

These three switches on the back panel will help you to fit perfectly iLoud Micro Monitor in every acoustic environment.

Desktop filter

This switch sets a notch filter to compensate the typical acoustic effect of a console or a desktop. Such placement usually results in a peak in the lower midrange. The Desktop switch activates a bell shaped notch filter, with a +3.5dB between 1kHz and 10kHz and -1dB below 400Hz.

High frequency filter

This switch controls the high frequency level using a shelf-type EQ. The level can be set to 0dB or +2dB (above 4kHz).

Low frequency filter

This switch controls the low frequency level using a shelf-type EQ. The level can be set to 0dB or -3dB (below 250Hz).
This filter is used to adjust the proximity effect of side walls and ceiling. Use this filter whenever the acoustics of your room cause problems in the low frequency range.

LED

The frontal LED on the Left speaker will show important information about iLoud Micro Monitor’s status:
Steady white: iLoud Micro Monitor is ON.
Steady red: clipping.
Flashing blue: iLoud Micro Monitor is pairing with your Bluetooth device.
Steady blue : the Bluetooth connected device is streaming audio to the speakers.

Drivers

Woofer
The woofer unit is a custom 3” paper cone capable to delivers balanced mid- and low-frequency response.
Tweeter
By employing a specially developed 3/4” silk cone with neodymium magnet, the tweeter can deliver an extremely natural response on the top-end.

Bass port
The hole in the front panel is a bass reflex port. It is designed to discharge the low frequency signals and enhance the overall bass response.

Speakers placement
Please make sure that no obstacles are presents in the way from the monitors to your ears. You should be able to see the speakers completely. iLoud Micro Monitor has been designed for a vertical set up. The speakers must be positioned on a firm ground or a stand. Please note that vibrating parts of nearby objects can mask the sound.

Desktop positioning
The point between the woofer and the tweeter should be positioned approximately at the height of your ears. In case you need to position the speakers in a significant lower or higher position, the monitors should be angled
accordingly. If the speakers are placed lower than the ear line, you can tilt them with the integrated rubber pads that, also, improves the acoustic decoupling of the speakers from the surface.
Desktop positioning

Listening position
When you use iLoud Micro Monitor for stereo applications, the optimum listening position should be located in the middle of an imaginary triangle. This means that your listening point (sweet point) will be located at the top of an equilateral triangle and the two loudspeakers should be placed at the other two points of this triangle. Furthermore, a symmetrical positioning is also important: this applies to the distance between speakers as well as to the walls, ceiling and floor. In order to have a symmetrical stereo image it is also important to have symmetrical reflections: we recommend to keep a distance of at least 20 cm (8 inches) from the walls, in order to avoid low frequency boosting.
Listening position

Room acoustics
The room acoustics plays a key role in the performance of your monitoring system. It is always advisable to make, at least, a minimum of acoustic treatment of your environment. This, along with the correct monitor’s positioning, will improve the linearity and the precision of the listening.

Microphone stand mounting

Thanks to the thread adapter on the bottom of the speakers, iLoud Micro Monitor can be mounted on any standard 3/8” microphone stand. This allows you to place the speakers at the perfect height and, most important, helps to reduce the typical reflections of the desktop (or shell) and, consequently, improves the frequency response/linearity of the speaker.

Block diagram

Troubleshooting

Type: 2-way active, bi-amped, studio monitor
Frequency response (-3dB): 55Hz – 20kHz
Frequency response (-10dB): 45 Hz – 22 kHz
Crossover Frequency: 3kHz
Tweeter: 3/4” silk dome and neodymium magnet
Woofer: 3” paper cone
Maximum SPL @ 50cm (with two speakers playing, averaged sinewave from 100 Hz to 10 kHz) : 107dB
Number of amplifiers: 4
Amplifiers type: Class-D
Total output power (both speakers): 70W (peak) – 50W RMS
Woofer output power (single speaker): 18W RMS
Tweeter output power (single speaker): 7W RMS
Acoustic settings: high shelf (0dB or +2dB from 4kHz up); low shelf (0dB or -3dB from 250Hz down); desktop (+3.5dB between 1kHz and 10kHz and -1dB below 400Hz)
High performance Bass-Reflex port
Bluetooth® compatible with A2DP protocol
56-bit DSP internal resolution
System total latency (analog input): 1.02 ms
System total latency (Bluetooth input): 155 ms (depends on host implementation, tested on iPhone 6S / iOS 10.0.1)
Connectors: 2x RCA unbalanced input; 1/8” AUX stereo input (unbalanced); 4-pin speakers connector
Dimensions (inches): 180mm x 135mm x 90mm (7” x 5.31” x 3.54”)
Weight (oz): 920g (32.45oz) left speaker – 800g (28.22oz) right speaker