SelectBlinds Adjustable Roman Door Shades Installation Guide
- June 4, 2024
- SelectBlinds
Table of Contents
Adjustable Roman Door Shades
How To Install Adjustable Roman Door Shades
Step 1. Decide the desirable position you want to place the shade. Use a dry
cloth to wipe the surface to ensure it is dust free, as the dust will affect
the quality of the adhesive tape. Mark both sides of the door with a dim
pencil, in even positions: left, right, upper.
Step 2. Peel the cover off the adhesive tape, slowly place the tape on the
door frame, and make sure the shade is in a parallel position.
Step 3. Roll the shade up and connect the straps to the hooks behind the
valance to place the shade into a raised-up position. Release the straps to
lower the shade.
Important: The adhesive tape cannot be re- applied to the door, as it loses
its strength. Only place the shade on the marked positions once prepared.