POBOMVOM SMD2835 Solar Pendant Light Instruction Manual
- June 17, 2024
- POBOMVOM
Table of Contents
POBOMVOM SMD2835 Solar Pendant Light
Product Information
Specifications:
- Product Name: Solar Pendant Light
- Charging Time: 6 hours under direct sunlight before the first use
- Usage: Outdoor lighting
- Features: Remote control with multiple modes, wall or deck mounting
Product Usage Instructions
Solar Panel Location:
- Position the solar panel in an area with regular direct sunlight exposure.
- Avoid shaded or cloudy spots to maximize charging efficiency and lighting duration.
- Keep the solar panel away from other light sources like street lamps to prevent interference.
Assembly Instructions:
- Mount the solar panel bracket on the wall or deck using the provided screws.
- Connect the solar panel and lamp head cords, secure them with the screw connector, and tighten them to prevent water ingress.
Maintenance:
Regularly clean the solar panel with a damp cloth. Avoid using chemicals or
abrasives and do not apply pressure while cleaning.
Remote Control:
Note: Modes 1, 2, and 3 are automatic dusk-to-dawn modes, while Modes 4 and 5
are manual. Higher brightness settings result in shorter lighting times. On
cloudy days, use Mode 1 or 2 to extend illumination hours.
FAQ
-
Q: What should I do if the lights are covered by snow?
A: Expose the battery to full, direct sunlight for at least 6 hours to ensure maximum capacity is restored. -
Q: How do I troubleshoot if the solar light doesn’t function upon initial setup?
A: Allow the solar panel to charge in direct sunlight for 6 hours.
Please charge the solar panel under direct sunlight for 6 hours before first use
SPECIFICATIONS
- Solar Panel: 6V/5W
- Battery: 3.7V/4400mAh 18650 battery
- LED: 98pcs Epistar SMD2835 0.2W/30LM LED
- Colour Temperature: 4000K-6000K
- Luminous Flux: 1200 Lumens
- Output Power: 15.0 Watts (when the battery is fully charged)
- Remote Control Distance: Up to 16.5ft
- Sensor Angle: 360°
- Cable Length: 15ft
- Waterproof: IP65
LIGHTING MODES
- Mode 1: Dim light at night, brightens when motion is detected, reverts to dim after 15 seconds of no motion.
- Mode 2: Light remains off, brightens when motion is detected at night, and switches off after 15 seconds without motion.
- Mode 3: Constant light during the night.
- Mode 4: Light remains off, brightens when motion is detected, switches off after 15 seconds, active throughout the day.
- Mode 5: Constant light all day.
- Timer Setting: 4H/6H, available for Modes 3 & 5.
Note:
In Modes 1, 2, and 3, the light operates automatically at night and turns off
during the day due to the solar panel’s light sensor. To control the light
manually during the day, choose Mode 4 or 5.
WINTERTIME TIPS
Remove snow or debris from the solar panel for optimal performance. If the
lights are covered by snow, expose the battery to full, direct sunlight for at
least 6 hours to ensure maximum capacity is restored.
SOLAR PANEL LOCATION
- Position the solar panel in an area with regular direct sunlight exposure. Shaded or cloudy spots will affect charging efficiency and lighting duration.
- Ensure the solar panel is placed away from other light sources, such as street or porch lamps, to prevent flickering or interference with automatic lighting.
Note:
If the solar light doesn’t function upon initial setup, allow the solar panel
to charge in direct sunlight for 6 hours.
ASSEMBLY INSTRUCTIONS
- Place the solar panel bracket on the wall or deck using the provided screws.
- Connect the solar panel and lamp head cords, secure them with the screw connector, and tighten them to prevent water ingress.
MAINTENANCE
Regularly clean the solar panel with a damp cloth. Avoid using chemicals or abrasives. Do not apply pressure while cleaning.
REMOTE CONTROL
NOTE:
Modes 1, 2, and 3 are automatic dusk-to-dawn modes, while Modes 4 and 5 are
manual. Higher brightness settings result in shorter lighting times. On cloudy
days, use Mode 1 or 2 to extend illumination hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>