POWERWIN PPS700W01 Portable Power Station User Manual
- June 17, 2024
- POWERWIN
Table of Contents
POWERWIN PPS700W01 Portable Power Station User Manual
POWERWIN’ PPS 700W01 Portable Power Station
No worries about outdoor and short of power any more. With portable power
station solar generator, you can easily stay charged while on-the-go. No
worries about suddenly power outage any more. No worries about outdoor dark
night any more.
POWERWIN’ Power Station offers you great power supply and confidence in the wild!
ATTENTION
A. The specifications and the pictures in this manual are for reference only.
B. The product is only used for emergency situation, it cannot replace the
standard AC power for household appliances or digital products.
C. Actual AC outlet and AC adapter would be different depending on the
locations of customer.
D. Fully charge the product before using it for the first time (minimum 10
hours), the battery bar no longer flashes is indicated fully charged.
Get To Know Your Product
1. FRONT
Charging Your Product
ATTENTION
If the ambient temperature is too high or the battery temperature is higher
than 122F(500C) due to continuous high-power discharge, the product cannot be
charged. When the battery temperature is less than 104’F(400C) , the charging
function will automatically resume.
If it is not used for a long time, it is best to fully charge it every three
months before storing; if it has not been used for half a year, please fully
charge the product before using.
It is best to fully charge each charging.
- LCD Battery Display
There are 5 segments to the battery, approximating 20% -40% – 60% – 80% -100% capacity.
As you use your product, segments will disappear from the display, indicating the remaining charge. When charging your product you will notice a battery segment blinking at a I second interval status. Once your products is fully charged, all battery segments will be lit and remain solid.
2. Charge Through Solar Panel
A. Place your solar panel where it will get as much strong direct sunlight as
possible.
B. Connect the output port of the solar panel with the input port of the
product to start charging. You will know the product is being charged when the
LCD display indicators blink. The product is fully charged when all battery
indicators stop blinking and remain solid.
Notes:
The actual charging efficiency can vary widely depending on weather, ambient temperature, sunlight’s strength, the angle that the solar panels faces to the straight sunlight and other factors. The maximum output voltage of the solar panel should not exceed 30V.
In order to ensure solar chaining efficiency, it is recommended to use solar panels with an open circuit output voltage of 12-30V. the maximum electric current can reach 7A.
3. Charge Through AC Adapter
Plug the original adapter into the machine’s DC input port and you will see the battery indicators on the screen blink.
Notes:
A. The product is fully charged when all battery indicators stop blinking and
remain solid.
After the product is fully charged, please unplug the AC wall charger in time.
B. Usually, It takes about 7-8 hours to fully charge the machine using the
original power adapter.
4. Charge Through Your Car
A. Plug the original car charger into the cigarette lighter socket of your 12V
car, and then plug into the DC input port of the machine.
B. The original car charger features 15A protector tube to protect your car.
Notes:
To avoid car battery power loss, you should charge this product through your
car cigarette lighter only when your car engine is started. This function is
for 12V car ONLY.
Protection mode(DC input)
A. Due to the different models of your car, it may not be fully charge.
B. Under-voltage protection: The power generator can’t be charged if the
voltage of your car is too low.
5. Charge by PD mode
Plug your PD charger to the PD 60W IN/OUT Dock.
Using Your Product
1. Button
2. Light Modes
A. Press this button to turn on the light, low-light mode.
B. Press this button again to change the light mode into high-light mode.
C. Press this button again to change the light mode into SOS.
D. Press the button again to turn off the light
Warning! DO NOT stare the light straightly!
3. USB Output Function
When three USB-A ports use them simultaneously, the current will be limited in the range of 2.6-3.2A.
4. DC Outputs
A. The cigarette lighter and The DC5521 (5.5mm in diameter) 12-16.8v ports
offer max IOA output current and automatically distributing max current
according to the external connected devices to ensure shortest charging time.
B. The DC5521 port can be connected with an cigarette lighter (The output
current is limited to 11-14A, power requires no more than120W)
Notes:
When the unit’s AC, DC, and USB are output at the same time, and battery power
exceeds 600W, it will cause the unit’s buzzer to alarm, and then the LCD
display will display a red exclamation mark. If the alarm does not clear for
more than 3 seconds, the unit will forcibly close all outputs.
Protection mode(DC outputs)
Short circuit protection: when short-circuit occurs to the external devices,
the machine starts beeping and stops charging.
5. AC Output
A. Plug the power cable of AC appliance into the AC outlet of the machine.
Press the power button to enter AC mode.
B. Make sure the power of the connected AC appliance is less than 600W.
Notes:
When there is no operation, the LCD screen backlight will automatically become
dim after 30 seconds, and all mode switches will be turned off. When the
machine is not working, it will automatically shut down after 30 seconds. When
the battery voltage is less than 29V, all output functions will be forcibly
shut down and need to be recharged to recover. When not in use, please turn
off the AC power.
Protection mode:(AC output)
This product has under voltage protection; overload protection; short circuit
protection; The overtemperature protection adopts double isolation circuit,
which is safe, reliable and efficient.
Product Specifications
Cold Weather Usage
Cold temperatures (32-104 OF) can affect the product’s battery capacity due to
chemical characteristics of the battery. If you’ll be living off grid in sub-
zero conditions, it is recommended to keep your product in an insulated
cooler, and connected to a power source (12V car/AC adapter/solar panel). The
natural heat generated by the product contained in an insulated cooler will
keep battery capacity at its highest level.
Disposal And Recycle
This product should not be disposed along with household waste. Please dispose
or recycle this product and the battery inside according to the local rules
and regulations.
Support Charging Device
USB port: Smart phones, tablets, smart watches, digital cameras, e-readers,
etc.
12VCar charger port:Car charger
DC output: Drones,routers, car refrigerators,etc.use12V as the power supply
device.
ACpower: Laptops,displays,appliances,etc.
Caution
Please read user manual carefully when you use this product. You should follow
the instruction.
1. When children are using the product, please make sure close supervision to
reduce the risks.
2. It will increase the risk of electric shock if you use a non-professional
product or accessories.
3. Please make sure work in a ventilated environment.
4. Please keep the product in a dry and ventilated place to avoid rain and
electric shock.
5. Please remove power plug when the product is not in use.
6. Do not expose the product to fire or excessive temperatures. It will
explode if the temperature is over 2660F (1300).
7. Do not disassemble the product. It may cause fire, explosion injury risk,
and unpredictable risks.
8. Do not use the product with damaged wires or plus, or damaged output
cables. It may cause an electric shock.
Pure Sine Wave Output
This product generates Pure sine wave, which is compatible with AC electric
appliance that works with Sinusoidal waveform (power GOOW).However, the
product is only used for emergency situations. It cannot replace the standard
DC or AC power supply for household appliances or digital products.
Package Content
1 x 600W Portable Power Station
1 xAC Adapter
1 X Car Charger Cable
1 X PD60W Charger Cable
1 X MC4 Solar Charging Cable
1 X User Manual
Warranty
Our company provides customers with warranty of 12 months from the date of
purchase.
Customer Services: service@iittechnology.com
Made in China
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>