SENCOR SEP 702 BT Children Wireless Headphones User Manual
- June 17, 2024
- SENCOR
Table of Contents
**SENCOR SEP 702 BT Children Wireless Headphones User Manual
**
Supply content
Headphones
35mm audio jack
User’s manual Micro USB charging cable
Description of BT Headphones and Controls
- Memory card slot
- On/Off button (long press) PLAY/PAUSE (press 1x)
- “M” button change source (Bluetooth, memory card)
- Volume down button (press 1x) previous track (long press)
- Volume up button (press 1x) Next track (long press)
- Socket for audio AUX IN mini jack (3.5 mm)
- Micro USB charging connector
- LED connection/charging status indicator
ILI Left earpiece – left audio channel
IRI Right earpiece – right audio channel
Putting into operation
Before first use, be sure to read the safety instructions contained in this user’s manual carefully. Before first use, start charging the headphones to the maximum level.
Turning on the headphones – press and hold the power button and wait for
the headphones to greet you.
Turning off the headphones – press and hold the power button and wait for
the headphones to announce the shutdown.
Warning: To prevent damage to your hearing, always keep the volume level
of your device to a minimum before connecting BT headphones to your mobile
device.
Note: The BT headphones will turn off after a longer period of inactivity
unless they are paired to another device.
Bluetooth
To pair the BT headphones with your mobile device, do the following:
Turn on the BT speaker and search for its Bluetooth name “SEP 702” on the
device to which you wish to pair and start the pairing process. If you are
requested to enter a pairing code while your device and the BT headphones are
pairing, use the following code: “0000”. To cancel the pairing process,
disconnect the BT earphones from your mobile device (cancel the Bluetooth
pairing). Note: To ensure a stable Bluetooth connection, make sure that the
distance between the BT headphones and your paired device is kept within 10
meters. Depending on ambient interference, in some cases it may be necessary
to maintain a shorter distance between the BT headphones and the paired
device.
Memory Card Playback
Insert the memory card with the contacts towards the outside of the headphones
(side of the headphones). When you insert a memory card, the BT headphones
will automatically start playing back its contents. If there is no file to
play on the memory card, the BT headphones will switch to Bluetooth mode. To
release the TF me- mory card, press it gently into the body of the BT
headphones with your fingernail or a blunt instrument and the card will
release. Then you can carefully remove it with your fingernails (or with
tweezers). Store audio files on the memory card in the order you want them to
be played back later.
Attention: Due to a number of devices on the market, compatibility and
playback support are not guaranteed for all media. The memory devices you want
to connect should be tested in advance and/ or formatted as FAT32. The
playback of protected media, files or content stored inside them may fail.
Audio AUX IN
The headphones are equipped with a 3.5mm jack. Your device can be connected to the BT headphones using the audio cable included in the box with the headphones. First connect the audio connector to your appliance and then into the socket in the BT headphones. Notice: Before connecting your device to the BT headphones, ensure that the output signal from your device is at its minimum level (minimum output volume). This will prevent damage to the BT headphones and your hearing.
Charging
A charged battery provides power for several hours of operation at normal
volume levels. A high volume consumes more battery power; therefore, we
recommend listening at normal volume levels. Charging of the BT headphones
will be indicated by a red LED. An extinguished red LED indicates a fully
charged battery.
Attention: For charging, use only the original accessories supplied with
the appliance. To achieve maximum battery life, it is advisable to start
charging the battery only when the battery is low (10% 20%). Charge
continuously until fully charged. If the battery life is already very short,
it is exhausted and we recommend you contact an authorised service centre for
more information. Recommendation: A low battery is first reported at 20% and
then at 10%. We recommend that you start charging to full level at the first
sign of a low battery. Recommendation: If your headphones are not to be
used for an extended period of time, we recommend to fully charge the
batteries once every two to three months.
Specification:
- Bluetooth Version 5.3
- Impendence : 320
- Driver Diameter: 30 mm
- Sensitivity: 99dB±3 dB
- Frequency Range: 20 Hz – 20 kHz
- IP20
- Battery Capacity: 400 mAh
- Connector: Micro USB
- Charging Time: 1h
- Playing Time: 7h (50% volume)
Safety Notice:
Please observe the rules of the Country or Region which you are in while
driving. Do not disassemble or modify the headset at any reason, otherwise, It
may damage or burn the headset. If there is any quality problem, please send
headset to authorized service center for repairing. Please keep the equipment
along with all the accessories out of the reach of children and pets. Extreme
temperatures will cause the device deformation, reduce the charging capacity
and shorten the working life. Please do not immerse the earphone into water.
Guarantee will be lost if damage is caused by immersed into water. It will
damage your hearing if you listen with high volume for a long time. It is
recommended that only use the lowest volume which is necessary for speak- ing
and listening to music.
Instructions and information regarding the disposal of used packaging
materials
Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances
The meaning of the symbol on the product, its accessory or packaging indicates
that this product shall not be treated as household waste. Please, dispose of
this product at your applicable collection point for the recycling of
electrical & electro- nic equipment waste. Alternatively in some states of the
European Union or other European states you may return your products to your
local retailer when buying an equivalent new product. The correct disposal of
this product will help save valuable natural resources and help in preventing
the potential negative im pact on the envi- ronment and human health, which
could be caused as a result of improper liquidati- on of waste. Please ask
your local authorities or the nearest waste collection centre for further
details. The improper disposal of this type of waste may fall subject to
national regulations for fines.
For business entities in the European Union
If you wish to dispose of an electrical or electronic device, request the
necessary information from your seller or supplier.
Disposal in other countries outside the European Union
If you wish to dispose of this product, request the necessary information
about the correct disposal method from local government departments or from
your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST ČR, a.s. declares that the radio equipment type SEP 702 BT is in
com- pliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: www.sencor.eu
Manufacturer: FAST CR, a.s.
U Sanitasu 1621
25101 Ricany Czech Republic