EVERSTONE S26 Series Stone Series Installation Guide
- June 12, 2024
- EVERSTONE
Table of Contents
STONE SERIES INSTALLATION GUIDE
MODELS: S26S, S26V, S27S, S27V
If for some reason you are missing parts of have a problem with your fixture
DO NOT CALL OR RETURN TO THE RETAILER. Call for direct assistance at
1-877-870-9283.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING FIXTURES.
BEFORE INSTALLATION
- Please check to see that your fixture was not damaged during shipment, and that you received all the hardware needed for installation. While we strive for perfection, accidents do happen. If you have a problem or are missing any parts, please call us at 1-877-870-9283 immediately.
- CAUTION: Disconnect main power at the breaker box before beginning installation. Do not turn power off at the wall switch only. Failure to properly disconnect the main power supply may result in serious injury.
- CAUTION: Install the appropriate size lamp in your Stone fixture. Do not exceed the manufacturer’s maximum wattage restrictions.
- SPECIAL NOTE: For easier installation, it is recommended the two (2) people be used when making the electrical connections and mounting the fixture.
HARDWARE
INSTALLATION
Customer Service 1-877-870-9283
www.wavelighting.com
BALLAST AND LAMP REPLACEMENT INSTRUCTIONS
Product contains an integrated Lamp/Ballast combination. To remove, grasp plastic area on each side of bulb area and rotate counterclockwise. Replace with MAX 26W SBCFL(GU-24) that is marked with the UL and C, US Logo. Use SBCFL marked – Not for use where directly exposed to water. Do not use SBCFL marked – Not for use in totally enclosed luminaire.
Mark means lamp contains Mercury. Follow disposal laws.
See www.lamprecycle.org 1102453-GUES Rev. B
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>