Jasco 79616 Squishy Light User Manual

June 17, 2024
JASCO

79616 Squishy Light

Star
Squishy Light

See reverse for easy-to-follow instructions and exclusive deals.
Thank you for your purchase!

Instructions made easy

Read instructions or watch an easy-to-follow video.
Scan code or visit byjasco.com/79616i
Register your product Receive exclusive deals and register your product.
Scan code or visit byjasco.com/deals Discover innovative lighting solutions at www.byjasco.com/lighting
Like our product?
Leave a review on your favorite retailer website or amazon.com.
Having problems?
Let us know how we can help.
Call 1-800-654-8483 between 7AM-8PM, M-F, Central Time.

BATTERY INSTALLATION – FIGURE A

  1. Remove the screw and open the battery cover.
  2. Insert 3 AAA batteries (not included), noting polarity.
  3. Close battery cover and re-insert screw.

NOTE: Battery replacement must be done by an adult. Dispose of used batteries safely — never ina fire as they may leak and explode. Do not mix old and new batteries.
USB-C POWER – FIGURE B

  1. Plug the USB-C end of the included power cable into the port on the back of the light.
  2. Plug the USB-A end of the power cable into a 5V, 1A USB-A port or adapter (not included).
    NOTE: While on USB-C power, the batteries will not be used. The power cable does not charge the batteries. If the power goes out, the light will switch to battery power.

OPERATION – FIGURE C

  1. Press the power button to turn the light ON/OFF.
  2. Lightly tap the base to change modes: high white, medium white, low white.

NOTE: When running only on batteries, the light will save power by turning off after 60 minutes.Jasco 79616 Squishy Light -
figurePackaging should be kept as it contains important information. This product conforms to the safety requirements of ASTM F963. Please retain this manual for future reference.

FCC STATEMENT:

Suppliers Declaration of Conformity | Model #: 79616 | Jasco Products Co., 10 E. Memorial Rd., Oklahoma City, OK 73114, www.byjasco.com
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
— Consult the dealer or an experienced radio/TV technician for help.
5VDC, 1A

CAUTION

  • HAVE AN ADULT REMOVE AND DISPOSE OF ALL PACKAGING, TIES AND FASTENERS BEFORE USE
  • NOT INTENDED FOR USE BY CHILDREN UNDER THE AGE OF 2 YEARS

WARNING

  • DO NOT USE WITH EXTENSION CORDS
  • USE INDOORS ONLY
  • DO NOT USE IN WET LOCTATIONS
  • PLUG ONLY INTO USB SAFETY CERTIFIED TYPE A PORT
  • REMOVE BATTERIES WHEN NOT IN USE OR DISCHARGED
  • DO NOT MIX OLD AND NEW BATTERIES
  • DO NOT USE RECHARGEABLE BATTERIES
  • DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC) OR RECHARGEABLE (NICKEL-CADMIUM) BATTERIES

**100% recyclable
Separate paper from plastic before recycling**
byjasco.com/recycle
paper made from 25%
post consumer waste

MADE IN CHINA
Distributed by Jasco Products Company LLC,
10 E. Memorial Rd., Oklahoma City, OK 73114.
This Jasco product has a 90-day limited warranty.
Visit www.byjasco.com  for warranty details.
Questions? Contact our U.S.-based Consumer
Care at 1-800-654-8483, M-F, 7AM-8PM Central Time.
For product patent information, visit www.byjasco.com/patents.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals