LED line 471307 Variante LED Wifi Tuya User Manual
- October 27, 2023
- LED line
Table of Contents
LED line 471307 Variante LED Wifi Tuya
BEFORE YOU BEGIN STOP
Please read all instructions carefully.
RETAIN THE MANUAL FOR FUTURE REFERENCE
Use the product as intended by the manufacturer. If you have any questions
contact the manufacturer.
AWARNINGI A RISK OF ELECTRIC SHOCK
Always disconnect the mains power supply before inspection, installation or
replacement.
AELECTRICAL REQUIREMENTS LED
controller has to be connected to the mains power supply in accordance with
instructions on the box The controller using a digital PwM (Pulse Width
Modulation) control system is used to control constant voltage (DC) LED
lights. This device is equipped with a WIFl control technology supported by
the Tuya intelligent management system.
Product’s features
- Product’s features: WIFI Tuya technology.
- Short circuit protection. DCi2-24V, four output channels, maximum load current: 4CH * 4A; Max. power: 192W/12V.384W/24V
- Compatible RF remote control -471338 LED line® LED remote control TUYA RGB/RGBW (product sold separately)
- Memory function: the device restores the last saved mode/function.
- Controller designed for RGBW LED strips with constant DC voltage
Installation instructions Fig.2)
Connect the single colour LED strip to the controller output, also bearing in mind the maximum controller load (see Fig1) Wire (+) (of the LED strip) shall be connected to the output marked V+ [Figure D. Connect the (-) wire (of the LED strip) to the output marked W (Fig.1. WARNING: Prior to the installation, make sure the power supply is disconnected from the 230V AC mains. Connect the DC voltage compatible power supply unit as per the LED strip’s technical requirements (12VDC, 242VDC). Please ensure the power of the LED driver is 10% higher than the connected circuit. Connect the output wires of the DC power supply unit to the controller according to (Fig. 2) Connect the plus (+) wire to the controller’s Input marked V and the minus wire to Input (V-) (Fig. 1 or through port 2 using the DC 2.1/S.Smm connector. Check the installation before use. Improper connection may cause damage to the controller.
Programming
The LED controller connects to our phone via a home Wi-Fi network, also when we are away from home. Simply install the Smart life – Smart Living application The main advantages of installing this LED controller in our house: Remote control of devices at home from anywhere in the world, Adding and controlling multiple devices simultaneously from one application, Voice control by Amazon Echo and Google Home Interaction with many Tuya intelligent devices. Automatic switching on/off the lamp based on temperature, time and place, Easy sharing of lamps among family members.
Easy and quick configuration
- Step1: Perform installation according to the above instructions. Turn on the Wi-Fiin your telephone.
- Step 2: Go to the App Store to download the “Smart life – Smart Living” application on your telephone (Fig3)
- Step 3: Follow the instructions to register your user name.
- Step 4: Adda device in the application – select “lighting’, then “ighting (Wi-FiJ
- Step 5: IF the LED strip is already flashing, skip the reset procedure – Reset the lamp by pressing and holding the RESET button for 5 seconds.
- Step 6: Click “confirm. quick blink’ and confirm by pressing Next”. If everything went well, the device will be added to the application.
NOTE: The Tuya Smart life application is constantly being improved. There may be changes in the software that differ from the above description. RF remote control 471338 LED line® Remote control for LED controller TUYA RGB/RGBW [product sold separately Before use, pair the controller with the remote control. The instructions for use and functions can be found in the manual belonging to the above mentioned remote control.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>