adonit M03Y23 Neo Pen Flame User Manual
- June 17, 2024
- adonit
Table of Contents
User Manual
Adonit Neo
OVERVIEW
A: Power On / Off Switch
B: Indicator Light
C: Type-C Charging Port
D: Rechargable Battery
E: Magnetic Clinging
F: Replaceable Pen Nib
FUNCTION
[1] Press the button once and the blue indicator light will immediately
turns on. Press the switch again and the light will go off. In case of no
operation for 5 minutes, the stylus will be automatically power off.
[2] Replaceable pen nib design (it can be easily removed / installed by
screwing the pen nib).
CHARGING
[1] Please use included Type-C cable to charge the stylus. Connect one
end to stylus via Type-C port and connect the other end to computer via USB
port.
[2] Connect the Type-C end to the stylus pen and the USB port to the
5V/1A DC power adapter.
[3] During the charging period , the red indicator light will be on. The
charging time is around 80 mins.
LIGHTING INSTRUCTION
Red light on when charging
Green light on when fully charged
Blue Light on when working
Flashing light when battery is low
SPECIFICATION
Dimensions: 165 mm * 9 mm
Weight: 14g
Charging Time: 1hours 40mins
Continuous Use: 15 hrs
Material: Pen body in aluminum alloy and pen nib in POM
COMPATIBILITY
iPad Air (3rd-5th Gen)
iPad mini (5th/6th Gen)
iPad (6th-10th Gen)
iPad Pro 11″ (1st-4th Gen)
iPad Pro 12.9″ (3rd-6th Gen) and Newer
- Not work for earlier versions of iPad, iPhone,
Android, Microsoft devices. Please confirm the above models before purchase.
PACKAGING LIST
1. Adonit Neo x 1
2. User manual x 1
3. Charging Cable x 1
4. Replacement Nib x 2
Adonit Neo No: 188
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept
any interference, including interference that may cause undesired operation of
the device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>