Adonit Neo Pro User Manual
- June 4, 2024
- adonit
Table of Contents
Adonit Neo Pro
OVERVIEW **
**
- A Power On/ Off Switch
- B Indicator Light
- C Rechargeable Battery
- D Magnetic Clinging
- E Replaceable Pen Nib
FUNCTION
- Press the button for 3 seconds and the blue indicator light will immediately turn on. Press the switch again and the light will go off. In case of no operation for 5 minutes, the stylus will automatically power off.
- Replaceable pen nib design (it can be easily removed/installed by screwing the pen nib).
CHARGING
- On an iPad model that supports Adonit Neo Pro, attach Adonit Neo Pro to the magnetic connector on the right side of your iPad.
- To see how much charge your Adonit Neo Pro has left, check the batteries widget. Please make sure that Bluetooth is turned on in Settings.
- The indicator light turns red while charging. The charging time is around 90 mins.
LIGHTING INSTRUCTION
The red light is on when the battery is low. Green light on when the battery is fully charged Blue Light on while using.
SPECIFICATION
- Dimensions: 167 x 9 mm
- Weight: 12 g
- Charging Time: 2 hours
- Continuous Use: 9 hours
- Material: Plastic body (POM nib)
- Color: Space Grey/ Matte Silver
COMPATIBILITY
- iPad Pro 11″ ( 1st/ 2nd/ 3rd Gen)
- iPad Pro 12.9″ ( 3rd/ 4th/ 5th Gen)
- iPad mini 6th
- iPad Air( 4th/ 5th Gen)
PACKAGING LIST
- Adonit Neo Pro x 1
- User Manual x 1
- Replacement nib x 2
Adonit Neo Pro No: 200
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
- This device may not cause interference, and
- This device must accept any interference, including interference that may cause undesired operation of the device.