METER ZL6 Wi-Fi Data Logger User Guide
- June 17, 2024
- METER
Table of Contents
METER ZL6 Wi-Fi Data Logger
Product Information:
The WI-FI DATA LOGGER ZL6 QUICK START is designed to send data to ZENTRA Cloud via a Wi-Fi connection. It comes with a 30-day satisfaction guarantee and is suitable for use in various environments, but please note that the case is water-resistant, not waterproof.
Specifications:
- Product: WI-FI DATA LOGGER ZL6 QUICK START
- Model: 18556-00
- Release Date: 11.2023
Product Usage Instructions
Preparation:
Inspect the ZL6 components to ensure they are intact. For installation, you
will need a mounting post. Install the included batteries and press the TEST
button. The LEDs will display errors until the Wi-Fi connection is
established. Refer to the ZL6 User Manual for configuring the device to the
Wi-Fi network.
Configuration:
Prior to field installation, test the sensor function and ZL6 communications.
To configure the device using a Smartphone or Tablet, activate the Bluetooth
module by pushing the TEST button on the ZL6 and select the device in Devices
Found on your smartphone.
Data Access With ZENTRA Cloud:
ZENTRA Cloud is a cloud-based web application for downloading, viewing, and
sharing ZL6 data. Visit zentracloud.com to access all ZL6 data online. A free
trial of ZENTRA Cloud is available for new devices.
Installation:
- Select Location and Mount Logger: Choose a location with maximum sunlight exposure for the solar panel. Attach the ZL6 to a mounting post using zip ties included. Install the logger upright to prevent water entry.
- Connect to Wi-Fi Network: Use ZENTRA Utility Mobile to configure Wi-Fi settings and connect the ZL6 to the network.
- Install Sensors: Install sensors as per their manuals, plug connectors into ZL6 sensor ports, and secure cables to the mounting post with some slack.
FAQ:
For answers to common questions, visit
meter.ly/zl6_faq
SUPPORT:
If you have any questions or problems, our support team is here to help. We
manufacture, test, calibrate, and repair every instrument in-house. Our
experts are available to assist with any inquiries you may have.
Preparation
Inspect and verify ZL6 components are intact. Installation will require a mounting post. ZL6 requires a Wi-Fi connection to send data to ZENTRA Cloud. See ZL6 User Manual to configure the ZL6 for the Wi-Fi network.
Install the enclosed batteries and press the TEST button. The LEDs will show
errors until the Wi-Fi is connected. Read the full ZL6 User Manual at
metergroup.com/zl6-support. All products have a 30-day satisfaction guarantee.
NOTE: The ZL6 case is water resistant, not waterproof. See the ZL6 User
Manual for tips on using the logger in extremely wet environments
Data Access With ZENTRA Cloud
ZENTRA Cloud is a cloud-based web application to download, view, and share
ZL6 data, as well as change logger configurations. Visit zentracloud.com to
access all ZL6 data online. A free trial of ZENTRA Cloud is available for new
devices.
Configuration
Test sensor function and ZL6 communications prior to field installation.
Using a Smartphone or Tablet
- Open the mobile app store and search for ZENTRA Utility Mobile or scan the QR code to open the METER ZENTRA Apps website.
- On the ZL6, push the TEST button to activate the Bluetooth module.
- On the smartphone, select the device in Devices Found.
For answers to common questions, visit meter.ly/zl6_faq
Installation
-
Select Location and Mount Logger
Choose a location and orientation to give the solar panel the maximum amount of sunlight. Consider the range of the Wi-Fi network and vegetation cover throughout the season. Use zip ties (included) to attach the ZL6 to a mounting post. Ensure the logger is installed in an upright position to reduce the possibility of water entering the ZL6 enclosure when installed outdoors. -
Connect to Wi-Fi Network
Tap Configure on the main screen. Use the Configure Wi-Fi Network feature of ZENTRA Utility Mobile to connect the ZL6 to the Wi-Fi network. ZENTRA Utility lists up to 12 Wi-Fi networks reported by the ZL6. Select the network that the ZL6 should use to communicate with ZENTRA Cloud. -
Configure Wi-Fi setting
ZENTRA Utility Mobile opens the network settings screen. Enter the passphrase if the network is secured. See the ZL6 User Manual if using an enterprise Wi- Fi network, these networks are often found on university campuses. Tap Join to send the settings to the ZL6. The logger proceeds to connect to this Wi-Fi network and communicate with ZENTRA Cloud. ZENTRA Utility Mobile will report any errors. See the ZL6 User Manual for troubleshooting recommendations. -
Install Sensors
Install sensors according to their user manuals. Plug the sensor connectors into the ZL6 sensor ports. Secure cables to mounting post with some cable slack. Configure measurement interval and sensor settings using ZENTRA Utility Mobile. Review sensor instantaneous measurements to verify the installed sensors are working.
SUPPORT
Have a question or problem? Our support team can help. We manufacture, test, calibrate, and repair every instrument in house. Our scientists and technicians use the instruments every day in our product testing lab. No matter what your question is, we have someone who can help you answer it.
NORTH AMERICA
Email:
support.environment@metergroup.com
Phone: +1.509.332.5600
EUROPE
Email:
support.europe@metergroup.com
Phone: +49 89 12 66 52 0
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>